Removing Bed rails on ZR5
Moderator: F9K9
Removing Bed rails on ZR5
I want to buy a 2003 CREW but it looks like the ZR5 are the only 03 left around here. Is it possible to remove the bed rails (easily). Is it just the standard stake holes that regular trucks have.
Thanks
Doug
Thanks
Doug
- HenryJ
- Admin K Elite
- Posts: 12705
- Joined: Tue Oct 01, 2002 9:14 pm
- Location: Ontario, Oregon
- Contact:
First off , welcome to THE forum
Wish I could be of more help, but the Zr5 was not an option in 2001 when I bought mine.
I have not seen the bed rails and I am not sure how they attach.
There are no stake pockets on my truck.
Wish I could be of more help, but the Zr5 was not an option in 2001 when I bought mine.
I have not seen the bed rails and I am not sure how they attach.
There are no stake pockets on my truck.
"Speed doesn't kill, suddenly becoming stationary does." - Richard Hammond
"Speed is just a matter of Money - How fast do YOU want to go?"-Mechanic from Mad Max-
If at first you don't succeed - Don't take up Skydiving! - ThunderII KE7CSK
- melloyellow
- Webhost
- Posts: 52
- Joined: Sun Sep 21, 2003 6:26 pm
- Location: Lemoore, CA
- Contact:
I just did that to mine. The holes are about a quarter inch. 2 on each side. When they did the superliner on mine they covered them completely. I didn't like the bed liner that came stock.
[size=75]2003 Yellow S10 Crew Cab ZR5: SuperLiner, PA192 Lift, 3 Leaf Kit, Bilsten Shocks, Yokohama GeoLander A/T + II, ARE IIsi Tonneau Cover with Wing[/size]
- melloyellow
- Webhost
- Posts: 52
- Joined: Sun Sep 21, 2003 6:26 pm
- Location: Lemoore, CA
- Contact:
It cost me $250. I like it. Much cheaper then Rhino. My guess they are about the same. The local company here that does it and they do both recommends this as the Rhino fades in our area of central CA.
[size=75]2003 Yellow S10 Crew Cab ZR5: SuperLiner, PA192 Lift, 3 Leaf Kit, Bilsten Shocks, Yokohama GeoLander A/T + II, ARE IIsi Tonneau Cover with Wing[/size]
- melloyellow
- Webhost
- Posts: 52
- Joined: Sun Sep 21, 2003 6:26 pm
- Location: Lemoore, CA
- Contact:
This is my next mod. Hard to believe this is an S10. Of course mine will be yellow with a graphite black gull wing. Should be ready in the next few days.
[size=75]2003 Yellow S10 Crew Cab ZR5: SuperLiner, PA192 Lift, 3 Leaf Kit, Bilsten Shocks, Yokohama GeoLander A/T + II, ARE IIsi Tonneau Cover with Wing[/size]
melloyellow wrote:This is my next mod. Hard to believe this is an S10. Of course mine will be yellow with a graphite black gull wing. Should be ready in the next few days. image
thats your next mod???
so your getting a wing. we have yet to have a cc with a wing
[size=75] -HOBIE
^^^^^^^^^^^^^^^^^| ||__\
| ##Budweiser ###### | ||''|"\,__.
|_...__...________ ====| |__|__|...]
"(@)'(@)""""**|(@)(@)******(@)I[/size]
^^^^^^^^^^^^^^^^^| ||__\
| ##Budweiser ###### | ||''|"\,__.
|_...__...________ ====| |__|__|...]
"(@)'(@)""""**|(@)(@)******(@)I[/size]
- Warnoffroad
- Crew Elite
- Posts: 477
- Joined: Sun Jan 19, 2003 6:04 pm
- Location: Winter Springs Florida
- Contact:
I pulled the bed liner out of my ZR5 to bolt on my CB antenna bracket. And I looked at them because I was wanting to add on the spray in bed liner to them. But I have know clue how to take them off. MASSIVE hammer maybe?
[size=75]02 ZR5 CC, SFA D44 front, D60 rear, 40" IROKs, np200 2nd t-case. SOLD
05 F-350 CC FX4 Diesel, 7" lift 37" toyos, 14.18 1/4 mile ET[/size]
05 F-350 CC FX4 Diesel, 7" lift 37" toyos, 14.18 1/4 mile ET[/size]
- Warnoffroad
- Crew Elite
- Posts: 477
- Joined: Sun Jan 19, 2003 6:04 pm
- Location: Winter Springs Florida
- Contact:
- melloyellow
- Webhost
- Posts: 52
- Joined: Sun Sep 21, 2003 6:26 pm
- Location: Lemoore, CA
- Contact:
- Warnoffroad
- Crew Elite
- Posts: 477
- Joined: Sun Jan 19, 2003 6:04 pm
- Location: Winter Springs Florida
- Contact:
- Conman
- Crew Elite
- Posts: 664
- Joined: Tue Oct 08, 2002 7:14 am
- Location: Long Island, NY USA
- Contact:
There is two bolts that hold each rail down. I don't remember what kind of bolt it was though. you can get to it without removing the bedliner. Probably would not be a bad time to remove the bed liner to clean it out underneath.
Cheers,
Con
Cheers,
Con
[size=75]2007 Hummer H3 all Stock
Sold: 2004 Chevy Avalanche Z71 all Stock.
Sold: 2002 Chevy S10 Crew Cab ZR5 - Mods: Truxedo Bed Cover, APC and TYC Lights.[/size]
Sold: 2004 Chevy Avalanche Z71 all Stock.
Sold: 2002 Chevy S10 Crew Cab ZR5 - Mods: Truxedo Bed Cover, APC and TYC Lights.[/size]