Picture of my crew cab

bmann 12 · Post by **bmann 12** » Sun May 22, 2011 6:26 pm

http://carphotos.cardomain.com/ride_ima ... _large.jpg

THATS A PICTURE OF MY CREW CAB! let me know what you think and what you think should be done to it! thanks

Post by **HenryJ** » Sun May 22, 2011 6:53 pm

Looks pretty good. What do you want to do with it? That will help determine what you might want to do to it.

bmann 12 · Post by **bmann 12** » Sun May 22, 2011 7:25 pm

well first i want clear corner running lights. but i cant find any with the foglight hook up. thinking bigger tires after 2inch body. (do you know what size i could get on there without rubbing with 2"body installed) maybe push bar? possible few more inches of lift?

Post by **HenryJ** » Sun May 22, 2011 7:39 pm

The APC clear corners have been discontinued. I have a set for sale in the classifieds. They are good , but not perfect by any means.

With a 2" bodylift you can clear 50" tires pretty well. Some have done a little trimming and carefully fit 31".

If you want to go big check out the MML (Marvelous Mystery Lift)

bmann 12 · Post by **bmann 12** » Sun May 22, 2011 7:46 pm

by 50 do you mean 30"?

Post by **HenryJ** » Sun May 22, 2011 7:58 pm

sorry, typo. Yes 30"

nebby58 · Post by **nebby58** » Sun May 22, 2011 8:04 pm

Are you going to go rugged or flashy? A friend once told me to pick the side of the fence your going to go quickly or you'll end up with a mismatched truck.

bmann 12 · Post by **bmann 12** » Sun May 22, 2011 8:07 pm

alright thanks henry j. and could i get a picture of the apc lights? and nebby58 im going for rugged

Post by **HenryJ** » Sun May 22, 2011 8:18 pm

Classifieds - Spares from ThunderII

bmann 12 · Post by **bmann 12** » Sun May 22, 2011 8:19 pm

how much you asking for them?

Post by **HenryJ** » Sun May 22, 2011 8:24 pm

Enough to cover the shipping and maybe change enough left over for a Rockstar Juiced?
I really just want all this stuff to find a good home.

bmann 12 · Post by **bmann 12** » Sun May 22, 2011 8:27 pm

how much would that be roughly? and do you have window visors or have a good sugestion on which brand to purchase? i would like all 4

nebby58 · Post by **nebby58** » Sun May 22, 2011 8:31 pm

I have a brand called auto ventshade. http://www.lundinternational.com/brands/avs/

nebby58 · Post by **nebby58** » Sun May 22, 2011 8:34 pm

Here is where you can buy them. http://www.autoanything.com/deflectors/ ... 14345.aspx

Post by **HenryJ** » Sun May 22, 2011 8:37 pm

bmann 12 wrote:how much would that be roughly? and do you have window visors or have a good sugestion on which brand to purchase? i would like all 4

I had Weathertech Weatherflector in channel window deflectors. They did a good job for me.

Shoot me a PM with a shipping address. I bet $25 would get all of them shipped to you.

bmann 12 · Post by **bmann 12** » Sun May 22, 2011 8:38 pm

sorry for all the questions. but do you have the inchannel or the tape on? im kind of up in the air on which i want. the inchannel i think look better. but i hear they fall off easy when window is down?

nebby58 · Post by **nebby58** » Sun May 22, 2011 8:43 pm

Tape on looks fine if installed correctly.

bmann 12 · Post by **bmann 12** » Sun May 22, 2011 8:45 pm

theres just to many different styles/brands for every thing these days. every day i find something else similar and just dont know which to get!

nebby58 · Post by **nebby58** » Sun May 22, 2011 8:49 pm

The new ones use that 3M tape. They'll be on there in minutes.

bmann 12 · Post by **bmann 12** » Sun May 22, 2011 8:52 pm

yeah it says the sell them auto vensheilds at my local autozone for $55 so ill go check it out sometime after i get a summer job. (hopefully this by next week)

nebby58 · Post by **nebby58** » Sun May 22, 2011 8:55 pm

Apply at Autozone and get an employee discount!

bmann 12 · Post by **bmann 12** » Sun May 22, 2011 9:00 pm

haha thats a good idea! but iv already appied and interviewed for a full time job right across the street from my house so im waiting for the call tomorrow or tuesday!

green02crew · Post by **green02crew** » Mon May 23, 2011 6:55 am

My friend had a pair of in channel and I have the ones on the outside. If both are installed correctly, both will provide years of use. I prefer the looks of the in channel ones though. Much cleaner install and I would go with those next time.

bmann 12 · Post by **bmann 12** » Mon May 23, 2011 3:21 pm

yes i agree. do you know what brand he has?

fallvitals · Post by **fallvitals** » Mon May 23, 2011 7:23 pm

i got some clears for fogs on ebay a while ago, paid A LOT for cheap chinesse crap. But they work. accidently dropped the grill taking it off once, broke the cheap chinesse fastener...

Consider what I said in our correspondences. The money youll sink into it could go a long ways else where.

bmann 12 · Post by **bmann 12** » Mon May 23, 2011 7:39 pm

what do you mean?

nebby58 · Post by **nebby58** » Mon May 23, 2011 7:42 pm

fallvitals wrote:i got some clears for fogs on ebay a while ago, paid A LOT for cheap chinesse crap. But they work. accidently dropped the grill taking it off once, broke the cheap chinesse fastener...

Consider what I said in our correspondences. The money youll sink into it could go a long ways else where.

Agreed. The Chinese do not make quality products. Buying one quality set is cheaper than buying 2 crappy sets.

bmann 12 · Post by **bmann 12** » Mon May 23, 2011 7:44 pm

what would be the quality clear corners? could you send me a link?

nebby58 · Post by **nebby58** » Mon May 23, 2011 7:48 pm

you could try this http://www.xtralights.com/s10_2.aspx

fallvitals · Post by **fallvitals** » Mon May 23, 2011 8:31 pm

Well. The page didn't load for me, but I'm assuming what you linked is the non fog light one. Those can be had every where. The clears with fog lights. You can't find. The ones I did buy was on eBay. I'm not sure if they are still on there, but those were the only ones i could find on the net.

I'm in reference to the email you sent and my reply.

S-10CREWCAB.NET