Some wheelin pics 9-13-05

Everything else! new member introductions, pics, announcements, news..

Moderator: F9K9

User avatar
coffeedrnkr
Crew Elite
Crew Elite
Posts: 358
Joined: Tue Aug 03, 2004 11:32 pm
Location: kansas
Contact:

Some wheelin pics 9-13-05

Post by coffeedrnkr »

Went to kansas rocks this last weekend with the president of the Pitt state offroad club and a couple of friends.

Here are some pics of my journey through carnage canyon

Image

http://www.crazyblaze.com/2005-09-10krocks/100_5019.JPG

http://www.crazyblaze.com/2005-09-10krocks/100_5020.JPG

http://www.crazyblaze.com/2005-09-10krocks/100_5022.JPG

Carnage canyon lived up to it's name claiming my tire as another victim
Image

http://www.crazyblaze.com/2005-09-10krocks/100_5023.JPG

I eventually made it out under my own power with a lot of throttle, my wheel didn't get chewed up too bad.


Image\

Here is the spare I had to borrow and use to get back up to the front of the park 8)
Image

this was the ONLY time I have EVER been wheeling without a spare!!!!!! and I have NEVER popped a tire offroad before

Here is a vid: http://www.crazyblaze.com/2005-09-10kro ... small2.mov

(hope I made the pics small enough :hide: )
[size=75][url=http://s80.photobucket.com/albums/j162/coffeedrnkr15/]The Crazyblaze[/url]
d44/d60 5.13's, atlas 3.8
[/size]
User avatar
adrenalnjunky
Crew Elite
Crew Elite
Posts: 895
Joined: Sun Jul 27, 2003 11:32 am
Location: West Monroe, Louisiana
Contact:

Post by adrenalnjunky »

awwe - that's such a cute little tire

:-)
[size=75]Thanks, CHRIS
2000 S10 Blazer 4x4 4Dr. -- 2" PA BodyLift, Daystar Shackles, TB Crank, 1.75" Rear wheel spacers, Yakima roofrack, 30" BFG AT's.
1969 VW Bug -- airbagged and in pieces.
1962 VW Karmann ghia -- rusting over in the corner. "That's not a tool--that's a damn brick!"[/size]
User avatar
Walt
Admin K Elite
Admin K Elite
Posts: 1556
Joined: Thu Jan 22, 2004 11:27 pm
Location: Mize, MS

Re: Some wheelin pics 9-13-05

Post by Walt »

coffeedrnkr wrote: Here is the spare I had to borrow and use to get back up to the front of the park 8)
Image
:lol: :lol: :lol: :lol: :lol: :roflmao: :roflmao: :roflmao: :lol: :lol: :lol: :lol: :lol:
--Walt
2001 S-10 CrewCab - Retired...
User avatar
border man
Crew Elite
Crew Elite
Posts: 475
Joined: Sat Nov 15, 2003 12:06 pm
Location: AZ
Contact:

Post by border man »

Looks like that tire was flat too!!! :lol: :lol:
[size=75]I didn't do it, it was already like that when I got it.[/size]
User avatar
coffeedrnkr
Crew Elite
Crew Elite
Posts: 358
Joined: Tue Aug 03, 2004 11:32 pm
Location: kansas
Contact:

Post by coffeedrnkr »

it was, the donut was off of an 88 cherokee and it looked like it had never been touched. As soon as we let my truck down off the jack the tire popped off the bead. the dude didn't care so I just drove back on the rim all the way back to the entrance of the park in 2wd.

I thought you guys would like that. take it as a lesson to NEVER wheel without a spare b/c the only time you will need it is the time you don't have it!!!!!!!!!!!!
[size=75][url=http://s80.photobucket.com/albums/j162/coffeedrnkr15/]The Crazyblaze[/url]
d44/d60 5.13's, atlas 3.8
[/size]
User avatar
bwenny247
Crew Elite
Crew Elite
Posts: 386
Joined: Sun Jan 16, 2005 8:45 pm
Location: Michigan
Contact:

Post by bwenny247 »

coffee:
is that the kind of wheeling you did when you had an IFS lift? or was it more tame then that?

anybody else having problems with the video. can't seem to get it to load
:|

EDIT: never mind. just my slow internet connection here at school. it loaded
:thumb: cool vid :D
[size=75]*SOLD* 5" BDS, 2" PA, 33" MT's, HPPIII , Airaid TB spacer, K&N FIPK, March pulleys, 2.5" straight pipe, Trucktec tonneau, Herculinered body line down, 3/16" custom skid plates[/size]
User avatar
coffeedrnkr
Crew Elite
Crew Elite
Posts: 358
Joined: Tue Aug 03, 2004 11:32 pm
Location: kansas
Contact:

Post by coffeedrnkr »

no, I would never have even considered going through this trail when I was still on my ifs lift. It would have been really scary if not impossible on the ifs, b/c it just doesn't flex and when the front of your truck follows the terrain it used to get pretty scary. The pictures don't do it too much justice, that trail was pretty knarly.

the wheeling I did on ifs was quite a bit more tame.
[size=75][url=http://s80.photobucket.com/albums/j162/coffeedrnkr15/]The Crazyblaze[/url]
d44/d60 5.13's, atlas 3.8
[/size]
User avatar
Walt
Admin K Elite
Admin K Elite
Posts: 1556
Joined: Thu Jan 22, 2004 11:27 pm
Location: Mize, MS

Post by Walt »

So I take it your front diff is not locked? :)
--Walt
2001 S-10 CrewCab - Retired...
User avatar
adrenalnjunky
Crew Elite
Crew Elite
Posts: 895
Joined: Sun Jul 27, 2003 11:32 am
Location: West Monroe, Louisiana
Contact:

Post by adrenalnjunky »

yeah - you must have that smart-trac or , some type of all wheel drive or something huh?


lol - what exactly was that guy babbling on about??
[size=75]Thanks, CHRIS
2000 S10 Blazer 4x4 4Dr. -- 2" PA BodyLift, Daystar Shackles, TB Crank, 1.75" Rear wheel spacers, Yakima roofrack, 30" BFG AT's.
1969 VW Bug -- airbagged and in pieces.
1962 VW Karmann ghia -- rusting over in the corner. "That's not a tool--that's a damn brick!"[/size]
User avatar
coffeedrnkr
Crew Elite
Crew Elite
Posts: 358
Joined: Tue Aug 03, 2004 11:32 pm
Location: kansas
Contact:

Post by coffeedrnkr »

I think they were trying to figure out why my front tires weren't spinning. I do have the autotrack transfer case but I was told on another forum that it acts just like a regular 2speed case but it just has the autotrack as an option and it doesn't affect the performance of the 4lo (I am not sure if that is true or not....) but I know my t-case has been leaking for a while and it was probably just being a pos b/c I backed up and tried it again without changing anything and the front started spinning again. so who knows??? I don't really care personally as long as it keeps workin for the most part untill I replace it with something that won't break.

"So I take it your front diff is not locked?"
I don't have a locker in my front diff, it is open but one wheel should have still been spinning and they kept telling me that none of the fronts were spinning so I am not sure what happened but it seemed to work ??beats me
[size=75][url=http://s80.photobucket.com/albums/j162/coffeedrnkr15/]The Crazyblaze[/url]
d44/d60 5.13's, atlas 3.8
[/size]
User avatar
HenryJ
Admin K Elite
Admin K Elite
Posts: 12705
Joined: Tue Oct 01, 2002 9:14 pm
Location: Ontario, Oregon
Contact:

Post by HenryJ »

coffeedrnkr wrote:... I do have the autotrack transfer case... I know my t-case has been leaking for a while...
The clip fell off of the pump and it is rocking back and forth sawing your transfercase in two. Take it apart and fix it now or pay $700 for a good used case.
Been there , fixed that :mg:

"Speed doesn't kill, suddenly becoming stationary does." - Richard Hammond
"Speed is just a matter of Money - How fast do YOU want to go?"-Mechanic from Mad Max-
If at first you don't succeed - Don't take up Skydiving!
- ThunderII KE7CSK
User avatar
coffeedrnkr
Crew Elite
Crew Elite
Posts: 358
Joined: Tue Aug 03, 2004 11:32 pm
Location: kansas
Contact:

Post by coffeedrnkr »

it is leaking out of the rear output seal around the driveshaft, I think the seal is just a little stretched b/c I have taken out my driveshaft quite a few times and probably hit it or something.

where was yours leaking from? or was it the same place?
[size=75][url=http://s80.photobucket.com/albums/j162/coffeedrnkr15/]The Crazyblaze[/url]
d44/d60 5.13's, atlas 3.8
[/size]