Bent rim or bent axle?

Anything related to the stock drivetrain, engine, transmission, axles, wheels...

Moderator: F9K9

User avatar
AZS10Crew
Crew K Elite
Crew K Elite
Posts: 1288
Joined: Tue Nov 12, 2002 9:38 am
Location: Plymouth, IN
Contact:

Bent rim or bent axle?

Post by AZS10Crew »

For the last couple weeks, I've had this "out of balance tire" sound on my truck. I didn't really think much about it because with the off-roading I do, a tire out of balance wouldn't surprise me. But today I was backing out of the drive and looking in the side mirror and noticed that the left rear wheel isn't spinning straight. Would this be a sign of just a bent rim or would a bent axle make the wheel wobble too?

I hope it's just a bent rim cause then I'll have an excuse to get a matching rim for my spare. :D
[size=75]Mark
[b][i][color=red]2004 Dodge Ram 1500 4x4 Quad Cab[/color][/i][/b]
[b][color=blue]"There are no stupid questions, just stupid people."[/color][/b][/size]
User avatar
a2b
Mod K Elite
Mod K Elite
Posts: 1765
Joined: Wed Oct 02, 2002 11:20 pm
Location: Los Angeles
Contact:

Post by a2b »

uh oh :shock:
[size=75] -HOBIE

^^^^^^^^^^^^^^^^^| ||__\
| ##Budweiser ###### | ||''|"\,__.
|_...__...________ ====| |__|__|...]
"(@)'(@)""""**|(@)(@)******(@)I[/size]
User avatar
AZS10Crew
Crew K Elite
Crew K Elite
Posts: 1288
Joined: Tue Nov 12, 2002 9:38 am
Location: Plymouth, IN
Contact:

Post by AZS10Crew »

a2b wrote:uh oh :shock:
That doesn't help much. :P

Neither possibility really worries me. Bent axle is covered under warranty, and a new rim is only about $40.
[size=75]Mark
[b][i][color=red]2004 Dodge Ram 1500 4x4 Quad Cab[/color][/i][/b]
[b][color=blue]"There are no stupid questions, just stupid people."[/color][/b][/size]
User avatar
a2b
Mod K Elite
Mod K Elite
Posts: 1765
Joined: Wed Oct 02, 2002 11:20 pm
Location: Los Angeles
Contact:

Post by a2b »

AZS10Crew wrote:
a2b wrote:uh oh :shock:
That doesn't help much. :P

Neither possibility really worries me. Bent axle is covered under warranty, and a new rim is only about $40.
uh oh :shock: :shock:
[size=75] -HOBIE

^^^^^^^^^^^^^^^^^| ||__\
| ##Budweiser ###### | ||''|"\,__.
|_...__...________ ====| |__|__|...]
"(@)'(@)""""**|(@)(@)******(@)I[/size]
User avatar
AZS10Crew
Crew K Elite
Crew K Elite
Posts: 1288
Joined: Tue Nov 12, 2002 9:38 am
Location: Plymouth, IN
Contact:

Post by AZS10Crew »

a2b wrote:
AZS10Crew wrote:
a2b wrote:uh oh :shock:
That doesn't help much. :P

Neither possibility really worries me. Bent axle is covered under warranty, and a new rim is only about $40.
uh oh :shock: :shock:
Thanks again...jackass. :P :lol:
[size=75]Mark
[b][i][color=red]2004 Dodge Ram 1500 4x4 Quad Cab[/color][/i][/b]
[b][color=blue]"There are no stupid questions, just stupid people."[/color][/b][/size]
User avatar
a2b
Mod K Elite
Mod K Elite
Posts: 1765
Joined: Wed Oct 02, 2002 11:20 pm
Location: Los Angeles
Contact:

Post by a2b »

i think.......you are going so fast in reverse that it just looks like its bending when its actually warping from the instense centrifugal force that is being applied to it by your FOOT :P
[size=75] -HOBIE

^^^^^^^^^^^^^^^^^| ||__\
| ##Budweiser ###### | ||''|"\,__.
|_...__...________ ====| |__|__|...]
"(@)'(@)""""**|(@)(@)******(@)I[/size]
User avatar
Conman
Crew Elite
Crew Elite
Posts: 664
Joined: Tue Oct 08, 2002 7:14 am
Location: Long Island, NY USA
Contact:

Post by Conman »

I would take the rim to get checked first. Your rims have more of an offset so you could have bent it. Let's start with that first.

Good Luck,
Con
[size=75]2007 Hummer H3 all Stock
Sold: 2004 Chevy Avalanche Z71 all Stock.
Sold: 2002 Chevy S10 Crew Cab ZR5 - Mods: Truxedo Bed Cover, APC and TYC Lights.[/size]
User avatar
a2b
Mod K Elite
Mod K Elite
Posts: 1765
Joined: Wed Oct 02, 2002 11:20 pm
Location: Los Angeles
Contact:

Post by a2b »

ummmm...when is the last time you torqued down your spacer :wink:
[size=75] -HOBIE

^^^^^^^^^^^^^^^^^| ||__\
| ##Budweiser ###### | ||''|"\,__.
|_...__...________ ====| |__|__|...]
"(@)'(@)""""**|(@)(@)******(@)I[/size]
User avatar
AZS10Crew
Crew K Elite
Crew K Elite
Posts: 1288
Joined: Tue Nov 12, 2002 9:38 am
Location: Plymouth, IN
Contact:

Post by AZS10Crew »

Well...I just got home a little while ago and took off the wheel. It seems to be fine. I went ahead and rotated the tires too and the "out of balance" noise is gone. Spacers were good and tight.

I watched the wheel almost the whole way home (except when I had to watch the road :P ) and I think it was just uneven pavement that made it look like the wheel wobbled. That combined with a dirt spot on the tire made it seem like it was wobbling.

Oh well...all seems OK now! :D
[size=75]Mark
[b][i][color=red]2004 Dodge Ram 1500 4x4 Quad Cab[/color][/i][/b]
[b][color=blue]"There are no stupid questions, just stupid people."[/color][/b][/size]
User avatar
NTXCrew
Crew Elite
Crew Elite
Posts: 331
Joined: Fri May 30, 2003 4:03 pm
Location: San Angelo, TX
Contact:

Post by NTXCrew »

Somebody's smokin' too much crack...... :lol: :wink:
2003 S-10 Crew Cab - Indigo Blue Metallic
Flowmaster 40 w/ turndown, Chopped Airbox, APC clear corners, Trenz billet bowtie, Shaved badges, Sylvania Silverstars, Xenon fogs
-Jim
User avatar
AZS10Crew
Crew K Elite
Crew K Elite
Posts: 1288
Joined: Tue Nov 12, 2002 9:38 am
Location: Plymouth, IN
Contact:

Post by AZS10Crew »

NTXCrew wrote:Somebody's smokin' too much crack...... :lol: :wink:
I'm trying to cut back...but the voices won't let me. :bounce:
[size=75]Mark
[b][i][color=red]2004 Dodge Ram 1500 4x4 Quad Cab[/color][/i][/b]
[b][color=blue]"There are no stupid questions, just stupid people."[/color][/b][/size]
User avatar
NTXCrew
Crew Elite
Crew Elite
Posts: 331
Joined: Fri May 30, 2003 4:03 pm
Location: San Angelo, TX
Contact:

Post by NTXCrew »

:lol: :lol: :lol: :lol:
2003 S-10 Crew Cab - Indigo Blue Metallic
Flowmaster 40 w/ turndown, Chopped Airbox, APC clear corners, Trenz billet bowtie, Shaved badges, Sylvania Silverstars, Xenon fogs
-Jim
User avatar
a2b
Mod K Elite
Mod K Elite
Posts: 1765
Joined: Wed Oct 02, 2002 11:20 pm
Location: Los Angeles
Contact:

Post by a2b »

thanks for all this stress you put on us... :roll: :wink:
[size=75] -HOBIE

^^^^^^^^^^^^^^^^^| ||__\
| ##Budweiser ###### | ||''|"\,__.
|_...__...________ ====| |__|__|...]
"(@)'(@)""""**|(@)(@)******(@)I[/size]
User avatar
2bunik
Crew Elite
Crew Elite
Posts: 434
Joined: Mon Jun 30, 2003 9:49 pm
Location: Mountain Home AFB , Idaho
Contact:

Post by 2bunik »

Image
[size=75]TARMAC TRENDZ car club
2003 GMC Zr5 maroon or somethingto it.
Two 10s in a custom box and Pioneer Premier 400w amp, Quad mod,Body lift, bed light.
http://www.tarmactrendz.vze.com/[/size]
User avatar
AZS10Crew
Crew K Elite
Crew K Elite
Posts: 1288
Joined: Tue Nov 12, 2002 9:38 am
Location: Plymouth, IN
Contact:

Post by AZS10Crew »

a2b wrote:thanks for all this stress you put on us... :roll: :wink:
Everyone could use a little extra stress in their lives...it gets the heart pumping. :mrgreen:
[size=75]Mark
[b][i][color=red]2004 Dodge Ram 1500 4x4 Quad Cab[/color][/i][/b]
[b][color=blue]"There are no stupid questions, just stupid people."[/color][/b][/size]
User avatar
Mike H.
Crew Elite
Crew Elite
Posts: 238
Joined: Sun Jun 01, 2003 8:42 pm
Location: Orlando, FL

Re: Bent rim or bent axle?

Post by Mike H. »

AZS10Crew wrote:......noticed that the left rear wheel isn't spinning straight. Would this be a sign of just a bent rim or would a bent axle make the wheel wobble too?
Hmm, I've noticed my wheels spin in circles. I'd be concerned if they started spinning straight. Was there alcohol involved last night? It could be your wheel is fine and your head is wobbling.
[size=75][url=http://f2.pg.photos.yahoo.com/ph/mikeh3235/lst?.dir=/&.src=ph&.done=http%3a//f2.pg.photos.yahoo.com/ph/mikeh3235/lst%3f%26.dir=/2002%2bGMC%2bCrew%2bCab-Spacers%26.src=ph%26.view=l&.view=l]Yahoo Photo Pages[/url]
(previous) 2002 GMC Sonoma Crew Cab
(now) 2004 Nissan Titan LE 4x4 Crew Cab[/size]
Rusty

Re: Bent rim or bent axle?

Post by Rusty »

Mike H. wrote:
AZS10Crew wrote:......noticed that the left rear wheel isn't spinning straight. Would this be a sign of just a bent rim or would a bent axle make the wheel wobble too?
Hmm, I've noticed my wheels spin in circles. I'd be concerned if they started spinning straight. Was there alcohol involved last night? It could be your wheel is fine and your head is wobbling.
:roflmao: Having been there more than a few times myself... :roflmao: