Lift kit pics!

[LMs10CrewCab]

Hey there!

I am new here, just wondering... Does anybody have any pics of the s10/gmc crew cab with a...

2" body lift and 2.5" rough country lift with 31" tires?

I really want to do this setup, thanks - LMs10CrewCab

[HenryJ]

The only one running the 2.5" rough country lift is a Blazer. blaz is the member. There are some videos in the GoPro thread. Check the NOS forum.

The Member rides thread is a good place to look at pictures.

[blaz]

Yes, I have these 2 lifts on my blazer. I have 33" km2's though. Here are a couple of links;

viewtopic.php?f=15&t=8807

viewtopic.php?f=4&t=8879

[HenryJ]

There you go! No speculation, straight from one with first hand experience

[blaz]

A couple more links that may be helpful. I have had plenty of help from the group on here so I am very happy to contribute when I can.

http://blazerforum.com/forum/lifting-te ... all-74701/

http://blazerforum.com/forum/builds-48/ ... zer-75972/

[LMs10CrewCab]

Hey thanks alot for the help, this is my first vehicle - watched CL for two years!

I do only city driving with some dirt roads, what do you think is best?

Marvelous Mystery Lift with 31"

Or 2" body lift and 2.5" RC with 31". ?

Which setup will have the least amount of repairs, front end work.. Ect?

I really like the 33" tires but I am afraid it wont handle well in the city/45mph.

BTW you got the coolest CC I have seen, it really looks good!
Like the blazer too I like both of your safari racks!

Thanks for the help, our family has not had a truck for over 15 years!

[LMs10CrewCab]

* Thought I was talking with F9K9, he a has a cool CC!

[MlePatron]

I just finished my RC kit yesterday on my CC and would second following Blaz's instructions. ESPECIALLY removing the steering link. I honestly don't think the diff will come out without doing that. It took me 1.5 hours to get it out once I got to that point and 1.5 minutes to put it back in. has to be twisted a bit then rotated like 90* with the half-shaft pointing to the rear to get it out. I REALLY wish RC would have mentioned a bit more about that in their instructions other than "Remove the diff"...

Haven't done a BL yet, but it's moving up on the list as I slowly get other mods done and slowly gather funds. Good luck!

[jrichmonds10]

I just finished my RC kit yesterday on my CC and would second following Blaz's instructions. ESPECIALLY removing the steering link. I honestly don't think the diff will come out without doing that. It took me 1.5 hours to get it out once I got to that point and 1.5 minutes to put it back in. has to be twisted a bit then rotated like 90* with the half-shaft pointing to the rear to get it out. I REALLY wish RC would have mentioned a bit more about that in their instructions other than "Remove the diff"...

Haven't done a BL yet, but it's moving up on the list as I slowly get other mods done and slowly gather funds. Good luck!

Do you have any pics of your truck up? Would like to see it

[MlePatron]

Here is a before picture...not ideal but it's before I lifted the front. I had a pretty solid rake of 2-3" before the RC.

Here is after.

The after pic has the TB's pushed a little too far and I have since brought it down to the RC recommended height. Saving up for the BL and bigger tires!

[LMs10CrewCab]

Hey thanks for all the pics, your truck looks nice !

Thanks Blaz for all your help to, I really appreciate all the help.

Have a nice day - LMs10CrewCab

[blaz]

No problem. I have had lots of help from other too.

[F9K9]

Looks good now! Will look better when it's time for bigger meats.

[MlePatron]

Oh yes it will. I'm on the prowl for a set of used MTs to try out and take me more places I shouldn't go. Next in line to that is a Synergy hidden winch. Should be fun!