Hey all; Newbie from mid-Michigan
Moderator: F9K9
Hey all; Newbie from mid-Michigan
Hi all; I am new to this site, but not new to s-10's. This crew is my second dime, my first was a 1988 Gmc s-15. I used to be a member of mys-10.com but that site no longer exists. I ran across this site and I think I will stay, as so far I have been looking through the threads and have read alot of great advise.
I have put some time into my crew, and it appears I have to spend a little more to get the pre cat taken off, but here is the stats so far.
K&N intake
Throttle plate taken off
NKG Plugs, with Taylor wires
Billet grill with billet bowtie
clear corners
Truck color tow hooks,
door guards,
mirrors, and debadged most of the truck
Truck color step bars and rails on a painted fiberglass cover
Those goofy looking euro taillights that I painted truck color
All handles painted
Flames down the side ( hard to see from a pic)
Verde chrome wheels
with 30/9.5/15 Mastercraft tires
Magna flow cat
Gibson muffler
Inside I have an Alpine 9825 deck
MB Quart premium 4.5 components in the dash
MB Quart 6.5 components in the front door
OZ Audio 6.5 components in the rear door
Orion 5 channel amp behind the rear seat, on a
hinged door, for maintinance.
A cheap Sony 8" sub in a box that I made which is
behind the seat as well
I will try and post a few pics of it and my street rod once I read how you guys do it on this site.
I have put some time into my crew, and it appears I have to spend a little more to get the pre cat taken off, but here is the stats so far.
K&N intake
Throttle plate taken off
NKG Plugs, with Taylor wires
Billet grill with billet bowtie
clear corners
Truck color tow hooks,
door guards,
mirrors, and debadged most of the truck
Truck color step bars and rails on a painted fiberglass cover
Those goofy looking euro taillights that I painted truck color
All handles painted
Flames down the side ( hard to see from a pic)
Verde chrome wheels
with 30/9.5/15 Mastercraft tires
Magna flow cat
Gibson muffler
Inside I have an Alpine 9825 deck
MB Quart premium 4.5 components in the dash
MB Quart 6.5 components in the front door
OZ Audio 6.5 components in the rear door
Orion 5 channel amp behind the rear seat, on a
hinged door, for maintinance.
A cheap Sony 8" sub in a box that I made which is
behind the seat as well
I will try and post a few pics of it and my street rod once I read how you guys do it on this site.
I think I can get the pics now that I have read the sticky
The first is my truck, which is a newer pic of it.
The 2, and 3 pic are my other toy. It is a 1940 with a chevy nova front clip out of a 1976 4 door, front steer. The rear is a ford 9 in. the motor and tranny are chevy as well 350 bored 40 and a 350 tranny. Enclave seats in the front and Jag seats in the rear, custom made console. This car is nearing paint ready, and I cant wait to get it on the road next late spring.
The first is my truck, which is a newer pic of it.
The 2, and 3 pic are my other toy. It is a 1940 with a chevy nova front clip out of a 1976 4 door, front steer. The rear is a ford 9 in. the motor and tranny are chevy as well 350 bored 40 and a 350 tranny. Enclave seats in the front and Jag seats in the rear, custom made console. This car is nearing paint ready, and I cant wait to get it on the road next late spring.
- killian96ss
- Crew K Elite
- Posts: 2669
- Joined: Tue Sep 09, 2003 11:53 am
- Location: Sacramento, California
It's a "cough" Dodge business coupe. I have always been a chevy man, but when I saw this in the weeds,at a used car lot, without too much rust, I had to have it. It will be completely smoothed out, and power everything, even the hood panels, and the trunk lid. This car is normally a two seater,just to give you an idea of the work so far.
hey what part of Michigan are you from? I'm from Cadillac. Nice looking truck and project car you've got there. you'll find a wealth of knowledge here and friendly folks ready to help.
Welcome and enjoy your stay
Welcome and enjoy your stay
[size=75]*SOLD* 5" BDS, 2" PA, 33" MT's, HPPIII , Airaid TB spacer, K&N FIPK, March pulleys, 2.5" straight pipe, Trucktec tonneau, Herculinered body line down, 3/16" custom skid plates[/size]
what years did you live in Manton, my dad's side of the family grew up there. Know any Dontje's? that's us!! lol, small world
[size=75]*SOLD* 5" BDS, 2" PA, 33" MT's, HPPIII , Airaid TB spacer, K&N FIPK, March pulleys, 2.5" straight pipe, Trucktec tonneau, Herculinered body line down, 3/16" custom skid plates[/size]
yep, we'll all be headed back that way come the middle of November. My dad was born in 1950 and he had 5 brothers born after him anywhere from 1951 to 1960.
DLP do you ride quads out north and east of Manton on the state land trails. That's right out where we hunt. We've been hunting the same land for over 50 years.
Supposed to get the first snowfall of the year tonight....got a little freezing/slushy rain last night and today. Should cool down and get the deer all pumped up for the rut
DLP do you ride quads out north and east of Manton on the state land trails. That's right out where we hunt. We've been hunting the same land for over 50 years.
Supposed to get the first snowfall of the year tonight....got a little freezing/slushy rain last night and today. Should cool down and get the deer all pumped up for the rut
[size=75]*SOLD* 5" BDS, 2" PA, 33" MT's, HPPIII , Airaid TB spacer, K&N FIPK, March pulleys, 2.5" straight pipe, Trucktec tonneau, Herculinered body line down, 3/16" custom skid plates[/size]
Ya that's about where we ride. The trail system is called Missaukee North just north of Manton. Than it's Missaukee South over towards Higgins Lake. I have a cabin in Sharon. It's a ghost town about 15 miles south-east of Kalkaska. I use to do a lot of bear hunting just north of Cadillac.
Bring on the snow! It was hailing here today.
Bring on the snow! It was hailing here today.
[size=75][b][color=blue]2003 Blue Crewcab[/b][/color][/size]