ZR2 fender flare
Moderator: F9K9
ZR2 fender flare
do zr2 fender flare will fit directly to our zr5? (it 's wider than our's)
-
HenryJ
- Admin K Elite
- Posts: 12705
- Joined: Tue Oct 01, 2002 9:14 pm
- Location: Ontario, Oregon
- Contact:
No. The ZR2 fenders are different. Bigger wheel openings and a flange.
"Speed doesn't kill, suddenly becoming stationary does." - Richard Hammond
"Speed is just a matter of Money - How fast do YOU want to go?"-Mechanic from Mad Max-
If at first you don't succeed - Don't take up Skydiving! - ThunderII KE7CSK
Diversified Creations here in Michigan makes what are called LS1 Flares (amongst a bunch of other sweet parts) for the ZR2's. I know they involve cutting the ZR2 fender up a bit, and i believe that in that process you end up cutting off the ZR2 Flare mounting edge. http://www.diversifiedcreations.com/dcS ... asp?id=100
So I am thinking that you might be able to use them on your CC, but I would call and double check with Mike (Owner) or his son (Brad).
http://diversifiedcreations.com
Hope that helps some
So I am thinking that you might be able to use them on your CC, but I would call and double check with Mike (Owner) or his son (Brad).
http://diversifiedcreations.com
Hope that helps some
-
HenryJ
- Admin K Elite
- Posts: 12705
- Joined: Tue Oct 01, 2002 9:14 pm
- Location: Ontario, Oregon
- Contact:
They don't fit our rear fender bulge. He mentioned perhaps casting a set for our rear someday. Not holding my breath though as he has yet to complete the Blazer rear flares. LS1 "Cut-out" Flares - Now available!
"Speed doesn't kill, suddenly becoming stationary does." - Richard Hammond
"Speed is just a matter of Money - How fast do YOU want to go?"-Mechanic from Mad Max-
If at first you don't succeed - Don't take up Skydiving! - ThunderII KE7CSK
-
Horsehammerr
- Crew Elite
- Posts: 779
- Joined: Sun Apr 15, 2007 2:03 pm
- Location: Kimberling City, MO.
I called Diversified yesterday and was told the LS-1 flares will fit with the same hack job they do to ZR2's. The problem I have with these and EVERY other so called custom flare, is they are all too narrow. I mean how many bigger diameter tires are skinny enough to fit under a flare that only stands 3 inches out from the fender ? Oh sure there are the 33/9.5 AT KO's that some run but I have 8 inch wheels with 3 3/4 inch back space, they stand 4 1/2 inches out of the fenders, even 1 3/4 inches past my stock ZR5 flares.
[size=75]'02ZR5 YellowCruzCab-Airbox chopped,Quadlights,Intake defuser chopped,Precat chopped,HD Bilsteins, 9x16 '84 Corvette wheels, NEXEN 245/50 tires, front & rear Sway bars, All Poly bushings in full suspension, front lowered 3 1/2", ZR2 rearend with 5" suspension lowering , FUN FUN FUN
-
HenryJ
- Admin K Elite
- Posts: 12705
- Joined: Tue Oct 01, 2002 9:14 pm
- Location: Ontario, Oregon
- Contact:
You will have lots less flare by the time you cut the rear flares to match out Izuzu bed, not to mention no place to mount them.
Look at what I did to fit Bushwacker flares and you will see why the rear LS1 flares are not an option.
The person you talked to at Diversified is not aware of our Isuzu bed would be my guess.
Look at what I did to fit Bushwacker flares and you will see why the rear LS1 flares are not an option.
The person you talked to at Diversified is not aware of our Isuzu bed would be my guess.
"Speed doesn't kill, suddenly becoming stationary does." - Richard Hammond
"Speed is just a matter of Money - How fast do YOU want to go?"-Mechanic from Mad Max-
If at first you don't succeed - Don't take up Skydiving! - ThunderII KE7CSK