New Subs??????

Maximous · Post by **Maximous** » Thu Jun 21, 2007 3:16 pm

has anybody seen these or know if they could work without cutting metal? i dont care if i have to take off the plastic or remove the jack cover, i can put the jack and stuff in the bed, i have a locking cover, http://www.pioneerelectronics.com/pna/v ... 81,00.html

BobbleSmitty · Post by **BobbleSmitty** » Thu Jun 21, 2007 3:35 pm

You should probably be able to custom make a box to fit those behind the back seat because the mounting depth is so short. You may need to mod the seat to bring it forward an inch by adding washers. And you may also have to cut out some carpet and plastic behind the seat to make enough space, but I'm sure it could be done. I have a 10" sub fit just fine and I still have the jack where it belongs.

By the looks of it, that 12" sub with a shorter mounting depth would work just fine.

stainlesst · Post by **stainlesst** » Sat Jun 23, 2007 7:24 am

i have two of those with a huge amp (2.4kwt!!!!!) these suckers are fair with one but multiples they rock! i am customizing my boxes for them right now. you can get the cubic inches down to half a cu ft. thats freakishly small for a 12' sub! my demension are a 14(L)x16(H)x6 1/2(BD)x angled top depth. i probably will have to adjust back seat hieght.

Maximous · Post by **Maximous** » Sun Jun 24, 2007 1:05 pm

so i take it, take the for sale sign off the CC and by some pioneer subs? one......two......??????

i want as much bass as possible, i think this would work for me, i wont cut anything, i will remove the plastic and just put it up, but i would prefer not to permanantly alter, yall think with only needing 3 1/4in depth and .5 cubic foot airspace that these would work?

radziej · Post by **radziej** » Mon Jun 25, 2007 4:34 am

ha you know what i was going to worry about space for my sub, after searching for the right sized sub for about 3 months(off & on) I came to a quick realization. I said F**K IT! I want bump and I don't care if the people in the back have room or not! So i put a ported box stuffed with an Alpine Type-R 10''! I put the amp behind the back seat and thats was the best decision I could've made! Hope this Helps! I have a new 10'' Kicker L5 in a truck box(Kicker Box) that has dual 2ohm voice coils if anyone wants it... (i don't have enough amp to run it so i haven't used it)

Maximous · Post by **Maximous** » Mon Jun 25, 2007 8:14 am

i dont have the option of saying F it, i need space, got two kids that already kick the backs of the seats, so this is a space saver kinda deal

Connerbug · Post by **Connerbug** » Thu Sep 13, 2007 5:55 am

I'd like to see a picture of the 12" Pioneer subs installed in stainlesst's CC

Wrangler · Post by **Wrangler** » Sun Sep 16, 2007 5:36 pm

Remember to take in to consideration the sub movement. My MTX box was tight to the back of the seat without cutting the extra metal right under the window ( just enough to get the box in). 3 1/2 inches at the top of the sub plus box material thickness will be pushing it I think without some type of modding.