Question about body mounts
Moderator: F9K9
Question about body mounts
Is it easier to get at the middle spark plug, on the drivers side, with a body lift? I noticed how difficult that plug is, due to it being behind the steering shaft. Also, how much lift can I get, for the body. All I see is 2" kits. My old S-10, I was able to get 3" and it was cheaper.
BTW, I am new here!
BTW, I am new here!
- F9K9
- Mod K Elite
- Posts: 6183
- Joined: Sun May 30, 2004 12:26 pm
- Location: London, Kentucky, United States
Welcome to the forum.
What year S-10 do you have
On later models only a two inch BL is available and it does make that spark plug a "little" easier to change.
What year S-10 do you have
On later models only a two inch BL is available and it does make that spark plug a "little" easier to change.
[size=75][b]"For those who have fought for it, [i][color=red]FR[/color][color=white]EE[/color][color=blue]DOM[/color][/i] has a taste that the protected will never know."
[url=http://www.naxja.org/forum/showthread.php?t=73349]GUIDE TO SEARCHING. [i] (Some of the forum software is different but, it has helped me a lot.)[/i][/url][/b]
[b]"Those who don't know history are destined to repeat it." Edmund Burke[/b][/size]
[url=http://www.naxja.org/forum/showthread.php?t=73349]GUIDE TO SEARCHING. [i] (Some of the forum software is different but, it has helped me a lot.)[/i][/url][/b]
[b]"Those who don't know history are destined to repeat it." Edmund Burke[/b][/size]
- F9K9
- Mod K Elite
- Posts: 6183
- Joined: Sun May 30, 2004 12:26 pm
- Location: London, Kentucky, United States
S10 wrote:Black 2002 Crew Cab! Is there a reason why only a 2" body lift is avaliable?
Thanks for the Welcome!
Have no clue why there is not one available but, IMO I believe it's due to rollover liability issues. The lawsuits have gotten more and more out of whack in the last few years. They still offer 3" lifts for the older ones because if, they stopped production then a good lawyer would toss the issue into a lawsuit on why they once made them and suddenly stopped. Again, just my 2 cents from what I have seen come through the federal courthouse where I work now
[size=75][b]"For those who have fought for it, [i][color=red]FR[/color][color=white]EE[/color][color=blue]DOM[/color][/i] has a taste that the protected will never know."
[url=http://www.naxja.org/forum/showthread.php?t=73349]GUIDE TO SEARCHING. [i] (Some of the forum software is different but, it has helped me a lot.)[/i][/url][/b]
[b]"Those who don't know history are destined to repeat it." Edmund Burke[/b][/size]
[url=http://www.naxja.org/forum/showthread.php?t=73349]GUIDE TO SEARCHING. [i] (Some of the forum software is different but, it has helped me a lot.)[/i][/url][/b]
[b]"Those who don't know history are destined to repeat it." Edmund Burke[/b][/size]
Welcome to the site
[size=75]2001 S-10 Crew , A.R.E Cap, Limo tint windows, Halogen Back up lights. Bilstein Shocks, 1.5 Rear Spacers, Summit Rear Diff Cover Clear Bumper Lights, Carbon Altezza Tail Lights, Billet Grill. SS Step Bars. GM full front bra. ,,, GM Quote concerning the gurgling heater core " They all sound like that"[/size]
- HenryJ
- Admin K Elite
- Posts: 12705
- Joined: Tue Oct 01, 2002 9:14 pm
- Location: Ontario, Oregon
- Contact:
From what I have heard I would think servicing number three spark plug is easier with the 2" bodylift.
I have done a few 2wd tune ups with out lifts and they were about the same as mine with a 2" bodylift. A wobble extension and sparkplug socket work pretty well. You will also need the wobble extension for one of the plugs on the passenger side as well.
There was a crew cabber here that did install a 3" bodylift. This was pretty early in the history of this forum. California maybe? He has not been here in years. With enough blocks I'm sure it could be done, but you will not be raising the bumpers or lowering the oil filter. There may also be issues with the steering shaft binding. This can be cured by slotting and lowering the bolt holes at the firewall and lowering the column.
I really don't think the amount you would save by buying a 3" kit for an older s-series would justify the issues that may be created.
Thanks for joining.
I have done a few 2wd tune ups with out lifts and they were about the same as mine with a 2" bodylift. A wobble extension and sparkplug socket work pretty well. You will also need the wobble extension for one of the plugs on the passenger side as well.
There was a crew cabber here that did install a 3" bodylift. This was pretty early in the history of this forum. California maybe? He has not been here in years. With enough blocks I'm sure it could be done, but you will not be raising the bumpers or lowering the oil filter. There may also be issues with the steering shaft binding. This can be cured by slotting and lowering the bolt holes at the firewall and lowering the column.
I really don't think the amount you would save by buying a 3" kit for an older s-series would justify the issues that may be created.
Thanks for joining.
"Speed doesn't kill, suddenly becoming stationary does." - Richard Hammond
"Speed is just a matter of Money - How fast do YOU want to go?"-Mechanic from Mad Max-
If at first you don't succeed - Don't take up Skydiving! - ThunderII KE7CSK
- BobbleSmitty
- Crew Elite
- Posts: 607
- Joined: Wed Feb 23, 2005 3:52 pm
- Location: Cleveland, OH
- Contact:
Hey welcome to the site. I'm from the east side of Cleveland and have a black S10 crew cab as well. What part of Cleveland are you from??
[size=75]2004 S-10 Crew Cab ZR5 -*SOLD*-2" PA Body Lift - Air Shocks - 30x9.5" Cooper Discoverer S/T tires - 1.25" Rear Spacers - Clear Bumper Lights - Westin Safari - Light Bar w/ 100watt 6" Lights - Custom Stainless Steel V-force Dual Exhaust w/ 3" Black Chrome Slash Cut Tips - CB radio w/ 100watt PA speaker - Alpine MP3/CD Player - 10" JL Sub w/ 300watt amp - Low Profile - 'TonneauMasters' Tonneau Cover - In-channel Vent Visors - Airbox mod - Custom Front Tow Hooks - Debadged [/size]
- killian96ss
- Crew K Elite
- Posts: 2669
- Joined: Tue Sep 09, 2003 11:53 am
- Location: Sacramento, California