How can I find out what gear ratio I have?
Moderator: F9K9
Welcome to the site jajwrig 
This was one of my first questions also! This is the link I was given to figure it out.
RPO code
Steve
This was one of my first questions also! This is the link I was given to figure it out.
RPO code
Steve
[size=75][color=blue]2003 S-10 crew cab[/color][/size]
[size=75][color=red]6in superlift[/color][/size]
[size=75][color=red]6in superlift[/color][/size]
-
bubaloo1983
- Crew Elite
- Posts: 573
- Joined: Sat Feb 14, 2004 7:58 pm
- Location: vancouver canada
or you could pull the pumpkin cover and then pull the drive shaft. then pull the shafts, then pull pull the carrier and pinion out and divided 
or
jack the rear up, turn the driver wheel around 1 turn and watch how many times the drive shaft turns. whallla
or
jack the rear up, turn the driver wheel around 1 turn and watch how many times the drive shaft turns. whallla
[size=75] -HOBIE
^^^^^^^^^^^^^^^^^| ||__\
| ##Budweiser ###### | ||''|"\,__.
|_...__...________ ====| |__|__|...]
"(@)'(@)""""**|(@)(@)******(@)I[/size]
^^^^^^^^^^^^^^^^^| ||__\
| ##Budweiser ###### | ||''|"\,__.
|_...__...________ ====| |__|__|...]
"(@)'(@)""""**|(@)(@)******(@)I[/size]