Truckin suspension lift
Moderator: F9K9
Truckin suspension lift
While i was just looking around the net for some other lift options i remembered that truckin suspensions made a 6" lift for our trucks. I went on the site and it says 1995 - 2003 CHEVROLET S10,S15,BLAZER,JIMMY LIFTKIT 6.5" BL9503 S10 FRONT/REAR
Body Type: SUV Wheel Drive: 4WD .... Would this kit work on our Crews? And does anyone know if someone has had one of their lifts their truck (i heard that they are not the best lifts). And info would be great.. thanks,
~Coda
Body Type: SUV Wheel Drive: 4WD .... Would this kit work on our Crews? And does anyone know if someone has had one of their lifts their truck (i heard that they are not the best lifts). And info would be great.. thanks,
~Coda
- adrenalnjunky
- Crew Elite
- Posts: 895
- Joined: Sun Jul 27, 2003 11:32 am
- Location: West Monroe, Louisiana
- Contact:
I think that Warn originally had one of these on his before he went SFA. Highroller has the 5-7 or something on his and is reportedly doing ok -- it is unknown if he goes offroad with it--doesn't post here much.
You are correct in that the company is a derivative of AIM industrues who is notorious in the automotive aftermarket for problems with customer service, and at times, lackluster parts.
http://www.s-10crewcab.com/phpBB2/viewt ... ht=truckin
http://www.s-10crewcab.com/phpBB2/viewt ... ht=truckin
Among other threads I found those quickly by mtyping in "truckin" on the search function.
You are correct in that the company is a derivative of AIM industrues who is notorious in the automotive aftermarket for problems with customer service, and at times, lackluster parts.
http://www.s-10crewcab.com/phpBB2/viewt ... ht=truckin
http://www.s-10crewcab.com/phpBB2/viewt ... ht=truckin
Among other threads I found those quickly by mtyping in "truckin" on the search function.
[size=75]Thanks, CHRIS
2000 S10 Blazer 4x4 4Dr. -- 2" PA BodyLift, Daystar Shackles, TB Crank, 1.75" Rear wheel spacers, Yakima roofrack, 30" BFG AT's.
1969 VW Bug -- airbagged and in pieces.
1962 VW Karmann ghia -- rusting over in the corner. "That's not a tool--that's a damn brick!"[/size]
2000 S10 Blazer 4x4 4Dr. -- 2" PA BodyLift, Daystar Shackles, TB Crank, 1.75" Rear wheel spacers, Yakima roofrack, 30" BFG AT's.
1969 VW Bug -- airbagged and in pieces.
1962 VW Karmann ghia -- rusting over in the corner. "That's not a tool--that's a damn brick!"[/size]
haha ok well then, yes from what i have read the Truckin suspension lifts are not too good.. thanks for everyones help
~~~~ i was talking about in terms of customer service
~~~~ i was talking about in terms of customer service
Last edited by Coda on Wed Oct 20, 2004 6:40 am, edited 1 time in total.
looking through the old members pages i saw itleast 2 or 3 trucks all with truckin suspension lifts. One had the 7 incher on it and it looked pretty good. As for the fact that truckin suspension is a derivitive from AIM industries im giving my truck to a shop to install the lift so im cofident that even if the instructions are bad etc. im sure theyve seen it before and know how to handle it... I think an s-10 crew would look awesome with the 7in lift and a 2 in pa body lift. Im going to call my shop tomorrow and see if they use truckin suspension lifts...
- Maximous
- Crew Elite
- Posts: 225
- Joined: Sat Aug 14, 2004 1:52 am
- Location: Fort Walton Beach, Florala
email the guy with the 7in aim, first off he doesn't even have the crew anymore, and from what i remember from when i talked to him, he said the lift was garbage and i believe he said he had to take it off to sell it, besides the fact that that lift is for show, not go, the instructions even say that they are not for offroad use, warnoffroad had one, i think a 5in, his broke thats why he went to SFA
[size=75]Driver carries no money, he's a Government employee[/size]
- Warnoffroad
- Crew Elite
- Posts: 477
- Joined: Sun Jan 19, 2003 6:04 pm
- Location: Winter Springs Florida
- Contact:
Re: Truckin suspension lift
It was a good lift for street, road the same as stock minus the swampers. Untill I got offroad did alright untill the wonderful pops from down under. I guess it all depends how heavy you are on the gasCoda wrote:While i was just looking around the net for some other lift options i remembered that truckin suspensions made a 6" lift for our trucks. I went on the site and it says 1995 - 2003 CHEVROLET S10,S15,BLAZER,JIMMY LIFTKIT 6.5" BL9503 S10 FRONT/REAR
Body Type: SUV Wheel Drive: 4WD .... Would this kit work on our Crews? And does anyone know if someone has had one of their lifts their truck (i heard that they are not the best lifts). And info would be great.. thanks,
~Coda
[size=75]02 ZR5 CC, SFA D44 front, D60 rear, 40" IROKs, np200 2nd t-case. SOLD
05 F-350 CC FX4 Diesel, 7" lift 37" toyos, 14.18 1/4 mile ET[/size]
05 F-350 CC FX4 Diesel, 7" lift 37" toyos, 14.18 1/4 mile ET[/size]
- Warnoffroad
- Crew Elite
- Posts: 477
- Joined: Sun Jan 19, 2003 6:04 pm
- Location: Winter Springs Florida
- Contact:
- Warnoffroad
- Crew Elite
- Posts: 477
- Joined: Sun Jan 19, 2003 6:04 pm
- Location: Winter Springs Florida
- Contact:
hell ya, but again that was with a set of brand new TSLs and a heavy foot on the rocks. It was great for street, drove like stock.malkavian wrote:holy cow Well That ought to be enough to keep people away from that. You tore the front diff out of the mounts?
[size=75]02 ZR5 CC, SFA D44 front, D60 rear, 40" IROKs, np200 2nd t-case. SOLD
05 F-350 CC FX4 Diesel, 7" lift 37" toyos, 14.18 1/4 mile ET[/size]
05 F-350 CC FX4 Diesel, 7" lift 37" toyos, 14.18 1/4 mile ET[/size]