Rear sway bar with 5" TM lift?

Fitting oversize tires, raising and lowering, suspension modifications...

Moderator: F9K9

User avatar
quickbiker
Crew K Elite
Crew K Elite
Posts: 1575
Joined: Fri Oct 11, 2002 6:01 pm
Location: VA
Contact:

Rear sway bar with 5" TM lift?

Post by quickbiker »

I'd like to do the rear sway bar with my TM lift like here: http://www.s-10crewcab.com/og1/modinfo/ ... waybar.htm . But I know I will need longer sway bar links. So my question is, does the TM lift for the Blazer's come with Rear link extensions since they come with a rear sway bar stock?
[size=75][url=http://outsideventure.com/s10crew/]01 S10 Crewcab - SAS'd[/url][/size]
User avatar
Brad
Crew Elite
Crew Elite
Posts: 170
Joined: Sun Jan 05, 2003 8:45 pm
Location: Orient OH

Post by Brad »

A blazer zr2 might. Check with superlift. See how they do it.

Brad
Freinds don't let freinds crank torsion bars.
User avatar
quickbiker
Crew K Elite
Crew K Elite
Posts: 1575
Joined: Fri Oct 11, 2002 6:01 pm
Location: VA
Contact:

Post by quickbiker »

Brad wrote:A blazer zr2 might. Check with superlift. See how they do it.

Brad
It would have to be a regular blazer.
[size=75][url=http://outsideventure.com/s10crew/]01 S10 Crewcab - SAS'd[/url][/size]
User avatar
quickbiker
Crew K Elite
Crew K Elite
Posts: 1575
Joined: Fri Oct 11, 2002 6:01 pm
Location: VA
Contact:

Post by quickbiker »

ok, I guess I could just use this and extend the links with a longer bolt if needed, no biggy. I am making it harder than it is. :lol:

http://www.jcwhitney.com/autoparts/Prod ... pId-400308
[size=75][url=http://outsideventure.com/s10crew/]01 S10 Crewcab - SAS'd[/url][/size]
User avatar
AZS10Crew
Crew K Elite
Crew K Elite
Posts: 1288
Joined: Tue Nov 12, 2002 9:38 am
Location: Plymouth, IN
Contact:

Post by AZS10Crew »

quickbiker wrote:ok, I guess I could just use this and extend the links with a longer bolt if needed, no biggy. I am making it harder than it is. :lol:

http://www.jcwhitney.com/autoparts/Prod ... pId-400308
Yeah...duh! :mrgreen:
[size=75]Mark
[b][i][color=red]2004 Dodge Ram 1500 4x4 Quad Cab[/color][/i][/b]
[b][color=blue]"There are no stupid questions, just stupid people."[/color][/b][/size]
User avatar
Brad
Crew Elite
Crew Elite
Posts: 170
Joined: Sun Jan 05, 2003 8:45 pm
Location: Orient OH

Post by Brad »

Find anything?

Brad
Freinds don't let freinds crank torsion bars.
User avatar
coffeedrnkr
Crew Elite
Crew Elite
Posts: 358
Joined: Tue Aug 03, 2004 11:32 pm
Location: kansas
Contact:

Post by coffeedrnkr »

AHHH i have the same question. i am just putting my 5" on and my swaybar didnt even come close to my endlinks so i just took the whole thing off. On the stock ones you cant buy a bigger bolt it is a rod with a hole at each end. Havent rolled it out of the g-rage yet so im hoping i dont have too much body roll

And i was looking at it and the rear sway bar is only half the size of the front one if not smaller. hmmm
[size=75][url=http://s80.photobucket.com/albums/j162/coffeedrnkr15/]The Crazyblaze[/url]
d44/d60 5.13's, atlas 3.8
[/size]