S-10CREWCAB.NET

**Constantly Under Construction As I Read And Learn More**

**Do any of these trucks have "build threads" that I can't find?**

**Please add more pictures**
____________________________________________________________________________________
MML thread: http://forums.s-10crewcab.net/viewtopic.php?f=15&t=3551

HenryJ wrote:

Here is what you need:
Performance Accessories PA192 2" body lift $209 Summit
Bilstein heavy duty shock absorbers $240 ORW
Torsion Bar adjustment and subsequent alignment $50
Boise SpringWorks Kit $190 Boise SpringWorks
Front 1.25" and rear 3" spacers $170 Ebay- Completevalue
Front replacement bump stops - GM PART # 15712438 $23 (new). These are off of the rear of late '90s and early 2000 Chevrolet fullsize pickups and can be purchased used for under $5
Skidz Cut-out Flares $375 (no longer available, however the cuts can still be made and paint or liner applied)
BFGoodrich All Terrain T/A KO 33x9.50-15 tires $560 4Wheelparts or Summit
Mount and balance $50

Grand total = $1697

**prices have gone up on some things**prices good as of 10/5/12**
____________________________________________________________________________________

Parts:

Bilstein shocks
Front part number 24-014106 $66.33
http://www.shockwarehouse.com/site/prod ... ries-Truck
Extended length: ~16 inches
Collapsed length: ~11 inches


Rear part number 24-016810 $66.33
http://www.shockwarehouse.com/site/prod ... ries-Truck
Extended length: ~23.5 inches
Collapsed length: ~16 inches


Boise Springworks S10 kit $230
Phone: 208-377-1157
http://www.boisespringworks.com/
Kit includes 6 springs, 4 u bolts with nuts and washers, and 2 3/8" center bolts with nuts
Long leaf length: 25 inches (13/12 with short side forward)
Middle leaf length: 19 inches (10/9 with short side forward)
Short leaf length: 12 inches (6/6 centered pin)


Energy Suspension Polyurathane Sway Bar Bushings part number 35207G $31.95
http://shop.synergyoffroad.com/Energy-S ... 35207G.htm

Performance Accessories 2 inch Body Lift part number PA-192 $233.95
http://shop.synergyoffroad.com/2-Body-L ... PRF192.htm

____________________________________________________________________________________

Tech:

Torsion bar adjustment: http://www.s-10crewcab.net/og1/modinfo/ ... ionbar.htm

http://www.s10forum.com/forum/f220/how- ... ft-439391/

Boise Springworks Kit: http://www.s-10crewcab.net/HenryJ/spring.html

Body lift: http://www.s-10crewcab.net/og1/modinfo/ ... dyLift.htm

Fender Cuts: http://www.s-10crewcab.net/og1/modinfo/ ... kidz1.html

viewtopic.php?f=3&t=7589

Tires and Wheels: https://www.rsracing.com/tech-wheel.html#backspace

http://forums.s-10crewcab.net/viewtopic.php?f=15&t=4670

Bump stops: http://www.s-10crewcab.net/forums/viewt ... 64&p=76316


Skid plates: viewtopic.php?f=3&t=6547


Polyurethane Sway Bar Bushings: http://www.s-10crewcab.net/forums/viewt ... =15&t=3864


Sway Bar Disconnects: http://www.s-10crewcab.net/forums/viewt ... f=15&t=452

Connected:

Disconnected:


Replacement front end part numbers:

Poly control arm bushings:
Upper: Moog part # K6418
Lower: Energy Suspension part # 3.3167g

Ball joints:
Upper: Moog part # K5320
Lower: Moog part # K5335

Tie rods:
Inner: Moog part # ES3584
Outer: Moog part # ES3462
Tie rod adjusting sleeve: Moog part # ES2004S

Idler arm: Moog part # K6251T
Pitman arm: Moog part # K6255

____________________________________________________________________________________

Stock 04 Crew Cab S10:



____________________________________________________________________________________

HenryJ: http://www.s-10crewcab.net/HenryJ/thunder2.html



____________________________________________________________________________________

F9K9:




____________________________________________________________________________________

Fallvitals: http://forums.s-10crewcab.net/viewtopic.php?f=15&t=7448


____________________________________________________________________________________

Kermit: http://www.gminsidenews.com/forums/f48/ ... 4x4-42763/


____________________________________________________________________________________

Ludwis:


____________________________________________________________________________________

Blaz: http://www.expeditionportal.com/forum/t ... light=blaz


____________________________________________________________________________________

Jedthrocornpone:




____________________________________________________________________________________

Jongo88:


____________________________________________________________________________________

Kpietrowski:


____________________________________________________________________________________

okie s10:


____________________________________________________________________________________

DeiselRed:

To be honest with you, this was my first forum......period. I didn't think of a build thread, until I was finished (actually just paused for now), and began building other rigs. I don't believe that I even have stock photos of my rig. I could probably assemble some pics in various stages if, anyone is interested.

Great start for a thread though. You put some thought and effort into it. Good job!!

here is a link to my build thread. I never put one on here because it is a blazer and not a crew. I do frequent this site though, it is one of the most helpful/friendly in existence.

http://www.expeditionportal.com/forum/t ... light=blaz

blaz wrote:here is a link to my build thread. I never put one on here because it is a blazer and not a crew. ...

While the focus is s-series crew cab, everyone is welcome. Blazers are a very close cousin

I could probably assemble some pics in various stages if, anyone is interested.

This guy is interested!

_STUCKY wrote:......This guy is interested!

I'll see what I can come up with.

Bump for newly added information.

Still Under construction

Bump duly noted.

Bump for more pretty pictures!

Should I include trucks that haven't cut the fenders? There's a couple good looking trucks that I'm not sure if the fenders are trimmed or not, but have pretty much everything else, including meaty rubber.

_STUCKY wrote:Should I include trucks that haven't cut the fenders? There's a couple good looking trucks that I'm not sure if the fenders are trimmed or not, but have pretty much everything else, including meaty rubber.

Sure , but I would rename the thread so that others do not assume all the rigs have the MML.

Bump!

Bump

Bump!



What are we bumping?

Wow! That truck looks great! Please post what all you used since there are a few different ways to go about it (example: springs vs. shackles)

Thanks!
She has seen mud twice, and won't again til the 6" SL and 35's are on.

04 Zr5 Bought stock in June w/68k
2" PA Body Lift (192)
1.5" Crank
1.5" Ebay AAL
Front fender/bumper trimming (Blends almost perfect you'd never know if i didn't tell you)
1.5" Front spacers, 3" Rear
33 12.5 15 BFG A/T's

Is there any way of getting these pics to show?

Photobucket killed all the links. I never started a new account on the other hosting sites. I still have them all on photobucket though.

If any of the MML guys are still lurking around this site, post up new pics!!