Page 1 of 1

longbed and shortbed diference

Posted: Wed Feb 04, 2004 6:32 pm
by Justin
is there a difference with these two styles? The pictures of the beds on trucks look the same. I am talking about the beds on extended cab and regular cab trucks.

Are the beds for regular cab S-10's the same as the bed's for the extended cab S-10's

thanks

Posted: Wed Feb 04, 2004 7:03 pm
by Dragonmaster
As far as I know there was never a long bed offered with the ext cab. The beds of the ext cab are about 1.5' shorter than the reg cab long beds.

Posted: Wed Feb 04, 2004 7:51 pm
by Justin
does anyone know the dimensional difference between a short bed extended cab and a longbed regular cab?

Posted: Wed Feb 04, 2004 7:51 pm
by Justin
im sorry, you gave the difference..i mean what is the length of your shortbed to a long bed

Posted: Wed Feb 04, 2004 8:45 pm
by Dragonmaster
Long bed is roughly 7.5', short bed is roughly 6.3', crew cab bed is 5.33'

Posted: Thu Feb 05, 2004 1:21 pm
by barch97
Dragonmaster wrote:Long bed is roughly 7.5', short bed is roughly 6.3', crew cab bed is 5.33'
WOW... Did I get screwed here? My bed is only about 4.5'

As a matter of fact the spec sheet at chevy.com lists the "Length at floor (in./mm) 55.2/1402"

Where'd you get a 5.33' / 64" / 5'-4" bed on a crew cab?

Posted: Thu Feb 05, 2004 1:30 pm
by Dragonmaster
barch97 wrote:WOW... Did I get screwed here? My bed is only about 4.5'

As a matter of fact the spec sheet at chevy.com lists the "Length at floor (in./mm) 55.2/1402"

Where'd you get a 5.33' / 64" / 5'-4" bed on a crew cab?
I thought I put that down wrong, but I wasn't sure, so the lengths are 7.5' (long), 6.3'(ext/short cab), and 4.5' (crew bed)

Posted: Thu Feb 05, 2004 6:32 pm
by AZS10Crew
I don't think the regular short bed is that long. The bed on my 92 was only 6'.

Posted: Thu Feb 05, 2004 8:19 pm
by Justin
Well, I've decided to look for a 7'-5" longbed for the conversion. For all practical purposes, If I will stretch the truck, I'd rather go long for more bedspace.. Tomorrow I stop in at my truck shop and ask to see if there are companies around.