Stock Rim tire height

Tribecrist · Post by **Tribecrist** » Sun Jul 17, 2005 9:15 am

I was planning on 30 x9.5 x15 on my stock rims .total diameter of 29.4 can i get to 30.5 total dia??? some tires are slightly larder...My mod will be boise springs with a tb crank..

I found the stock tire dia to be 28.7

Mark

F9K9 · Post by **F9K9** » Sun Jul 17, 2005 10:06 am

Don't know exactly what you are asking here but, many have been successful with the stock rim and 30.5X9.5s on the street. I was running that size before my BL "on the street" with aftermarket wheels with less than 6" BL. Top_Sgt is running those now after BL on the street.

Tribecrist · Post by **Tribecrist** » Mon Jul 18, 2005 8:39 am

I am asking whats the max overall tire diameter and tire tread width that I can place on the S-10 stock wheels and without any rubbing issues.

Modification - Boise AAL and 1 1/2" TB crank

Mark

barch97 · Post by **barch97** » Mon Jul 18, 2005 9:08 am

I believe some here have had rubbing with stock tires on stock rims.

barch97 · Post by **barch97** » Mon Jul 18, 2005 9:10 am

T-bar crank will get you more clearence at rest but a little bump and you're right back at stock height. Also, 1-1/2" of T-bar crank is A LOT of T-bar crank. You may want to save some of that tire money for new cv joints every few months.

jeff024 · Post by **jeff024** » Mon Jul 18, 2005 11:03 am

without atleast a BL I wouldnt go any bigger then a 30x9.5 overall height of 29.5

Tribecrist · Post by **Tribecrist** » Mon Jul 18, 2005 11:29 am

Thanks jeff024 ...

Mark

jeff024 · Post by **jeff024** » Mon Jul 18, 2005 12:32 pm

this is my old wheel tire combo with 30s

not to much room left and this is with a TB crank and a BL

Blaze One · Post by **Blaze One** » Mon Jul 18, 2005 1:45 pm

jeff.. is that with a stock offset rim ? you could probably get a 31" in there .

jeff024 · Post by **jeff024** » Mon Jul 18, 2005 2:24 pm

the wheel above is 15x7s with 5.5" BS I might have been able to but I dont wanna cut on my truck and would be really pi$$ed if I bought tires that rubbed so I stuck with 30s . I put the same overall height on my new wheels but when the times comes I think I will go to a tire thats overall 30" - 30.2"

Blaze One · Post by **Blaze One** » Mon Jul 18, 2005 2:36 pm

Better to be safe then sorry I guess . Nice truck . Thanks .

jeff024 · Post by **jeff024** » Mon Jul 18, 2005 2:39 pm

thanks I try