Installed my Spacers

MikeyZR5 · Post by **MikeyZR5** » Tue Jul 01, 2003 9:15 pm

I finally received my spacersand installed them. They are 1.3", something like that, I will try to get pics up...My brother can tell a difference, but i guess i need to see it in Sunlight

a2b · Post by **a2b** » Tue Jul 01, 2003 9:46 pm

MikeyZR5 wrote:I finally received my spacersand installed them. They are 1.3", something like that, I will try to get pics up...My brother can tell a difference, but i guess i need to see it in Sunlight

i absoultely loved my truck after spacers. it looked so much better

MikeyZR5 · Post by **MikeyZR5** » Tue Jul 01, 2003 9:47 pm

well took the Maglight and checked it out...u can tell a difference...I think I even got a 30HP increase to those wheels...HA HA HA!!!

AZS10Crew · Post by **AZS10Crew** » Tue Jul 01, 2003 10:05 pm

MikeyZR5 wrote:well took the Maglight and checked it out...u can tell a difference...I think I even got a 30HP increase to those wheels...HA HA HA!!!

Now now...don't become a ricer on us. Installing the sticker of the manufacturer does not add HP.

quickbiker · Post by **quickbiker** » Wed Jul 02, 2003 2:16 am

a2b wrote:
MikeyZR5 wrote:I finally received my spacersand installed them. They are 1.3", something like that, I will try to get pics up...My brother can tell a difference, but i guess i need to see it in Sunlight

i absoultely loved my truck after spacers. it looked so much better

And handles way better!

Doc · Post by **Doc** » Sat Jul 05, 2003 3:50 pm

Can someone tell me if these look like a good buy?

http://cgi.ebay.com/ebaymotors/ws/eBayI ... 33749&rd=1

quickbiker · Post by **quickbiker** » Sat Jul 05, 2003 8:47 pm

That looks like a sucky price. Buy new.

melloyellow · Post by **melloyellow** » Wed Oct 22, 2003 2:58 pm

I ordered my spacers from 2 different companies. They are both 1.5 inch spacers. One set is from Performance Wheel and Tire for $145 with shipping. It came with no lug nuts. They are also about .5 inches bigger in diameter. The other set came from AIM Industries for $127 with shipping. They came with the lug nuts.

Both sets look of very good quality. I now need to pick a set and sell a set if any one is interested. I will probably keep the AIM set unless someone has some reasons to pick the other. Then I am going to order a set of 2.5 inch for the back.

quickbiker · Post by **quickbiker** » Wed Oct 22, 2003 5:34 pm

OH man, buy it all from AIM. Good lugs cost allot, AIM is worth it.

melloyellow · Post by **melloyellow** » Wed Oct 22, 2003 5:39 pm

I guess I just need to order my 2.5 inch set for the rear then.

Mike H. · Post by **Mike H.** » Wed Oct 22, 2003 5:56 pm

Mine are PW. I've heard to much bad, and some personal experience, with AIM. PW will include the lugs for $1 each.

quickbiker · Post by **quickbiker** » Wed Oct 22, 2003 6:02 pm

I've never heard anything bad with AIM. ?? I got a locker in the rear and 2.25" spacers in rear and 1.25 in front, no problem.

a2b · Post by **a2b** » Wed Oct 22, 2003 6:32 pm

ya the spacers arent bad quality wise...but AIM is world wide known for terrible service

proroc · Post by **proroc** » Sat Dec 13, 2003 11:28 pm

Hey guys im new here

I own a 1997 S-10 4X4 Ext cab. Non-ZR2. I want to order a set of 1.5" wheel spacers for the front and back of my truck too

Can you tell me where to buy them? Do I need longer studs? If so can you post which ones I need or a link? Thanks!

Post by **HenryJ** » Sun Dec 14, 2003 8:23 am

proroc wrote:Hey guys im new here I own a 1997 S-10 4X4 Ext cab. Non-ZR2. I want to order a set of 1.5" wheel spacers for the front and back of my truck too Can you tell me where to buy them? Do I need longer studs? If so can you post which ones I need or a link? Thanks!

Welcome! You might consider wheels with less offset/rear spacing if you are going to add to front and rear the same amount, the cost may be very close if you sell your current wheels.

You do not need longer studs.

Here are some threads on spacers-
Spacers , GP for spacers , Wheel spacers

Of course check out the Mod info page and its information : Spacers

proroc · Post by **proroc** » Sun Dec 14, 2003 10:49 am

After talking to adrenalnjunky, I decided to only get 1.5" spacers for the rear wheels. I know ZR2's are 3" wider than us front and rear? If I put 1.5" spacers on the front, is there any disavantage or will I run into any problems? If just adding rear spacers makes the rims look even I will stop there. I dont want my front rims sticking out too far. Thanks again. I love this site, you guy post a TON of good info. I just feel bad because I have a Xcab and not a Crewy

a2b · Post by **a2b** » Sun Dec 14, 2003 12:44 pm

there is no disadvantage of being too wide. 1.5" spacers are not that big compared to what others are using...ext cabs are cool too

S-10CREWCAB.NET

Installed my Spacers

Installed my Spacers

Re: Installed my Spacers

Re: Installed my Spacers

How about these?