torsion bar delete

britishninja · Post by **britishninja** » Sun Mar 29, 2015 10:18 pm

Hey I was woundering if any one has done a torsion bar to coil over conversion on there cc and if so how and or what did they use to do it

britishninja · Post by **britishninja** » Sun Mar 29, 2015 10:24 pm

And I'm looking to raise it not lower it

Horsehammerr · Post by **Horsehammerr** » Mon Mar 30, 2015 2:48 am

I think if you search SFA , you will find a ton of info. But thats the only way besides lowering .

Built2Bend · Post by **Built2Bend** » Mon Mar 30, 2015 3:31 pm

I've seen 1 coil over ifs lifted truck. It was a build thread I. S10 forum I believe. He used after market upper and lower control arms. With custom coil over mounts. And I believe he even had the coil overs custom made. I'll see if I can find it Agean.

And I believe a couple people have made heavy duty ifs trucks with 9in independint center sections and custom shafts. But I don't remember actually reading those builds just herd about them. I'm more interested in sfa so I never research ifs.
Also you may want to consider sfa it easier (you can nearly buy everything for it bolt on). And depending on how you do your ifs. It's stronger.

Built2Bend · Post by **Built2Bend** » Mon Mar 30, 2015 3:45 pm

This thread says 2 company made kits for it and has a couple pictures. But no one sure what the company's name is.
http://www.s10forum.com/forum/f220/can- ... ics/458612

Here's some good info
http://www.race-dezert.com/forum/thread ... vel.54537/

this guy built a 2wd one In the last couple pages of his build thread
And he built a sfa crew also so you can read about both if you want
http://www.s10forum.com/forum/f221/my-c ... ics/467832

britishninja · Post by **britishninja** » Mon Mar 30, 2015 6:19 pm

when looking up SFA kits do i look for ones for a blazer or s10 im never sure about that when looking up parts

Built2Bend · Post by **Built2Bend** » Fri Apr 10, 2015 9:26 pm

We'll only a couple places sell s10 sas kits that I know of.

https://www.4wdfactory.com/store/produc ... r-Kit.html
There's sky's kit

https://www.4wdfactory.com/store/produc ... wd%29.html
Ord kit.

http://www.s10forum.com/forum/f221/anyo ... ics/433015
I couldent find diversified creations but here's a link to where they're talking about it.
But the point to realize about this kit is it's only a jeep xj lift kit bolted to an s10 frame with jeep axle so even if they don't make it all you have to do buy the xj kit

And of course you can custom build it all.

S-10CREWCAB.NET

torsion bar delete

torsion bar delete

Re: torsion bar delete

Re: torsion bar delete

Re: torsion bar delete

Re: torsion bar delete

Re: torsion bar delete

Re: torsion bar delete