lean

dettony · Post by **dettony** » Tue Sep 29, 2009 6:37 am

hey guys i got a question again im not sure but it seems like my truck leans to the passenger side more than the driver side and i noticed more ware to the pass side tire could i have a bad ball joint or needing an alinment or somthing i checked the front end while it was jacked up and every thing seemed fine any info would br great thanks

killian96ss · Post by **killian96ss** » Tue Sep 29, 2009 12:25 pm

Trim Height Inspection Procedure

Steve

dettony · Post by **dettony** » Tue Sep 29, 2009 12:57 pm

what???

dettony · Post by **dettony** » Tue Sep 29, 2009 1:04 pm

ok i understand thanks

dettony · Post by **dettony** » Tue Sep 29, 2009 1:15 pm

it leans about a 1/4 inch in the front anda 1/2 in the back can i just crank the torsion bar up a 1/4 and be done or is that a big fat NO!!

Post by **HenryJ** » Tue Sep 29, 2009 3:06 pm

Adjusting the torsion bars can help level the truck side to side. Keep in mind that with a full tank of fuel and a healthy driver in the seat it may actually level out.

killian96ss · Post by **killian96ss** » Tue Sep 29, 2009 4:24 pm

Don't forget if you do decide to level out your truck by adjusting the torsion bars you will need to have an alignment done afterwards because the caster/camber will be off.

Steve