S-10CREWCAB.NET

http://www.cjairbrush.com/images/WOLFS10G.jpg http://www.cjairbrush.com/images/WOLFS10H.jpg Owner: Chris Location: FL Make: Chevrolet Model: S-10 Crew Cab ZR5 Year: 2003 Engine: 4.3L V6 Gears: 3.73 G80 MODS > Custom painted body and airbrushed hood (my hobby) > 2" Performance Accessories Body Lift ...

The PA 192 worked great for me, too.

I want to make the cuts, and I am also wondering what to do to finish it off. Has anyone tried one of these wheel well trim products?

http://www.customautotrim.com/products/ ... elwell.htm

I just installed the PA 2 inch body lift. Has anyone tried adding to this kit to make it a 3 inch lift? I would expect to need the following: 1. Longer bolts 2. Either 3 inch blocks (or add something to augment the 2 inch blocks). I've seen the blocks for sale separate from a lift kit. 3. 3 inch sle...

In case it helps anyone else, I picked up a battery cable splice at Autozone to give my battery cable slack. The splice includes the same connector as the stock battery cable, with three cables attached that are ready to splice with the stock cables. I disconnected the battery, cut off the stock cab...

OK. Thanks again.

I took the ground off the filler neck, and left the end that was already attached to the frame alone. If I mount the ground that was on the filler neck onto the frame, I would have a frame to frame ground. I am thinking that a ground from the bed to the frame would be better. Am I thinking straight?...

Thanks guys. I stopped earlier this evening with all the blocks in, but two of the bolts don't want to thread. I'll start back up in the morning. I made the mistake of buying a hydrolic jack that only extends to 13 inches. I had to use multiple 2 x 4's to get the necessary height. I removed the grou...

I figured out my problem. My wood blocks on top of the jack were catching on the step rails. Very stupid of me. The blocks are all in, but not tight yet.

I am putting in the PA192. I am up to the point of jacking up the cab by placing the jack under the rockers. The frame is lifing up along with the cab. I removed the eight body bolts as specified in the instructions. I decided to move on to the bed, and I was able to lift that with no problems. I ha...

OK - I'll start that process tomorrow. That is probably real good advice, especially since I am up North in the rust belt.

Thanks for all of the advice! I appreciate it. I'll share my experience and post pics when I am done.

I am tentatively planning to attempt the PA 192 bodylift myself next weekend. I have a 03 ZR5 crew. I do not have a hitch, and I do not go off-roading. I have read a lot of the posts on this site. Thank you to all that have shared their experiences. This is the first step towards a magical mystery l...

I am a new member, and this is my first post. Just an FYI... There is a 4 page article on Superlift's 6 inch S10 kit on a S10 crew cab in the August issue of Off Road Enthusiast (ORE). I just picked the magazine up tonight at Walmart in Erie, PA. The picture of the finished crew looks great. The fla...