S-10CREWCAB.NET

Snotick

just an update. I changed the flashers a few days after this post. My problem was fixed too.

Sure glad I didnt tear into my steering column and spend a bunch of money that didnt need to be spent.

Thanks rlrnr53.

Snotick

Thanks for the update. I wish mine would just fix itself too. I may replace the flashers before I tear into the multifunction switch.

Snotick

The only suggestion was to check the rear ground connections. Which I did. That has not solved the problem. Jim quoted the original poster, I assumed the instructions to replace the multifunction switch was to correct rlrnr53's problem, and may not solve my problem.

Snotick

rlrnr53's post was 3 years ago, I think he got his problem taken care of.

I revived this thread to try to figure out what is wrong with my turn signals.

Thanks.

Snotick

Starting up this old thread since I searched and could not find a more specific answer to my problem. The right turn signal on my 02 CC flashes faster when the headlights are on. During the day, with the daytime running lights on, the turn signal is fine. Once I park it in the garage, or in the shad...

Snotick

I was just joking about it being the wrong model.

Snotick

Solution: http://0.content.collegehumor.com/d1/ch6/b/b/collegehumor.2726eacb80a972822192b2db2552780e.jpg that would work, but it appears to be lincoln model. I was looking for one for the CC. roadrunner. My wife started at boystown, before the new post office was built, her mom and step dad are rur...

Snotick

roadrunner wrote: I work as a rural carrier and the job opening for full-time was here.

My wife has been a rural mail carrier here in Omaha for 25 years.

Snotick

I see you made an upgrade to a warmer climate (and probably less taxes too) LOL

Snotick

You know we're just a few more nickels away from syphon thieves coming out of the woodwork. I was just thinking of a way to prevent it. I think I will I'll just sell my truck and buy a crappy bicycle. No one would want to steal an old 10 speed.

Snotick

I was talking about locking the fuel door, not just the gas cap. I think there are two types. I am assuming that it simply works via a release cable, the adding of the cable would be simple. My concern is with modding the catch at the fuel door.

Snotick

Has anyone modded their CC to make the fuel door lock. Where you need to push or pull some type of release from inside the cab to open the fuel door. With the rising cost of gas, and the fact that my gas cap was oddly loose on my CC, (caused a SES light) I am thinking about alternatives to just the ...

Snotick

I agree, sorry for hijacking the thread, I got the answer I needed. Thanks HenryJ

Snotick

I have read some of the other posts here. That was the main reason for my concern with the ride. I got the impression that the Bilsteins were geared toward the off road enthusiast. I do plan to keep the truck long term. I was leaning toward the Bilsteins from the beginning. Cost is not a major conce...

Snotick

yeah, my right rear is leaking. Would it have been so hard for GM to put a better shock on their vehicle. I know automakers are trying to keep up by cutting costs. But, the way a cars now a days ride like crap after the first 5-10k You would think it would make a difference in customer loyalty when ...

Snotick

I want it all !! I want my CC to ride like a cadillac . Just kidding. I just dont need a off road shock, as I dont use the truck for off road. Trying to find a good compromise.

Snotick

Sorry to kinda change the topic. I am going to replace my shocks here in a few months. I still have the stock shocks on my 2002 CC with 28,000 miles. I have been reading about how everyone likes the bilstiens or ranchos. My question is this. My truck is used mostly for commuting and city driving. I ...

Snotick

I have a great store about six blocks from my house, they used to be a mom and pop store for 25 years but got bought out by O'reilly's about 2 years ago. There is only 1 original guy still working there, plus a few minimum wage lacky's filling time until their next paycheck. A good auto shop/parts s...

Snotick

thanks for the quick reply, I see by your suggestion that you dont hold much faith in local parts stores for their testing, I will make sure I take it to two places to make sure its bad. I did a preliminary search here looking for suggestions on shorts, but didnt find a whole lot dealing with my pro...

Snotick

My CC wouldnt start this morning. It have had a little cold spell (30 degrees) the battery doesnt seem to show that it takes a charge when I put the charger on it. When its running the Voltage on the dash is reading around 15 volts. I cleaned the battery terminals and checked voltage at the battery ...

Snotick

Thanks for your help Border Man. But with all due respect, my original question was the dimensions of the stock radio, At first I was told that my truck cannot have a double din size opening because it was a 2002. After a few more posts, it was confirmed that I can, and I do, have a double din radio...

Snotick

The problem I am having is that I can find double din head units that are under the 6.5" depth, but if I am going to have to cut the supports. Then It opens up other options that are deaper than 6.5"
Again, my first choice is not to cut, if I dont have to.

Snotick

I went back and looked at that, I see where it shows that it needs to be modified. I was hoping SONOMACREW would be able to shed some more light on the subject.

Snotick

I did look on Crutchfield a few days ago, it lists the same Kenwood that SONOMACREW installed as compatible with the 02 CC. They also listed the depth at less than 5.5 inches. But Kenwoods web site lists the specs for head unit as being 6.5 inches. So, I dont know who to believe Crutchfield or Kenwo...

Snotick

I read a thread that SONAMACREW started, where he installed a Kenwood double din touchscreen, he stated that it took an install kit, but other than that it went right in. I did a little research on the Kenwood unit he installed. I is 165mm deep (6.5 inches) I have found a few other double din touch ...

Snotick

mine is RDS, but I didnt see any markings that say it is a 6 disc cd changer. Does yours say 6 disc on it somewhere??

Snotick

How do you post pics in here

Snotick

I think with a little more research I should be able to narrow down which units will fit. I was just hoping someone had pulled the stock head out and had it sitting on a shelf somewhere that they could get some measurements for me. From what I read in that other thread, I thought GM put the double d...

Snotick

I suppose that anything is possible, but this truck is bone stock, with no other mods. I dont think that the previous owner would have done all those mods just to replace the radio with another factory GM radio. Wouldnt he also have to alter the center console under the dash to remove the cassette p...

Snotick

then I have a double din in my 2002, because I have the one pictured on the right. It has both the cd and cassette in the head unit. Not the cassette mounted below the dash by the console. It still doesnt get me any closer to finding the depth of a stock head unit. I have been trying to find specs o...

Snotick

i looked at that photo before too. Is the stereo on the left a 1.5 din and the one on the right a double din ??

Snotick

I think I have a double din size opening, my CC was built later in 2002. I believe the opening is 4" tall

Snotick

Does anyone know what size the factory stereo is in the CC's. I just purchased a 2002 w/ the CD/Cassette Double Din Unit. I was thinking about swapping it out for a DVD/GPS 7" touch screen unit. When I checked Crutchfields, it shows a limited # of head units that will fit. Crutchfield also listed a ...

S-10CREWCAB.NET

Search found 33 matches

Locking Gas Fill Door.

Bad Battery???/

Stock Radio Size