S-10CREWCAB.NET

slammed98gmc

bar still available?

slammed98gmc

I picked one up off of ebay for 500$ shipped and all i did was paint it and swap my disc and calipers over. The rotors on the rear I bought where pretty rough and had been sitting outside for awhile. The guy I got it from picked it up at a local salvage yard and then realized it was way to wide for ...

slammed98gmc

Im looking to buy another engine wiring harness to modify for my engine swap.(attempting to do the swap on my next 3 day weekend) . Im having a hard time finding one for a 2001. Ive got a line on a 2003 zr5 harness and pcm and I was wondering if anyone knows if there is a difference in wiring harnes...

slammed98gmc

I was just wondering...not trying to offend you by anymeans.
This truck has 120+k on it with the original spark plugs and It is still getting around 16mpg with 33s on it.It doesnt do it with great haste,but it does it.

slammed98gmc

how often do you change spark plugs? I can change all the plugs from under the hood anyways.

slammed98gmc

I put another set of shorter bilstein shocks on the front and it rides great now.I drove the truck around in a ditch down the road and flex the suspension as far as it would go and took all my measurements.These shock where just short enough.It may look as though the second shock does not have enoug...

slammed98gmc

rebound control is what I need.

slammed98gmc

im thinking of building my own bracket setup to install another shock.I think i will probalby be mounting it to the upper control arm and build something off of the stock shock tower.

slammed98gmc

im just looking for an alternative to the single bilstien shock that im running.It is not as firm as I would like and im about to add some weight to the front with a v8

slammed98gmc

I found a kit for zr2's,wondering if anyone has tried it on a crew?

link to the superlift kit http://www.rockymountainsusp.com/W_multipleshk_GM.htm

slammed98gmc

ported heads,comp cam,1.6 rockers,long tubes,6 speed trans,4.88 gears and 100 shot of nitrous.

slammed98gmc

Split topic since the Bilstein thread was headed way off topic-HJ

this is my daily driver for the most part,theres not many places to off road in dallas and there definetly are not rocks. 6.6" of side wall is going to be plenty for what i do.

slammed98gmc

i got my bilstiens installed last week and Im still not sure im happy with them.Over all it rides better than the normal superlift shocks,but it still leaves a little to be desired in the front.Kinda have a floating sensation in the front while driving down the highway and bounces alot off road.They...

slammed98gmc

I pulled the front shaft out this morning and found that the cage around the balls was cracked and allowed the balls to fall out.This shaft has no servicable parts from gm.I guess im going to pick one up off of ebay and see what happens.I dont know if it broke due to age and mileage or because it is...

slammed98gmc

has anyone broken a front driveshaft? I was in colorado this weekend and was snowed in.I basically had the only vehicle that could get out of the hotel parking lot so I made quite a few runs to the store.Late in the day i pulled into the store and shut the truck off with everything still in 4lo and ...

slammed98gmc

Steve2003 wrote:Very nice truck! Thanks for the pics.

what size wheels and tires do you have on your truck?

slammed98gmc

i am definately not a black steel wheel guy and do not care for that look at all personally.

slammed98gmc

I dont wheel per say,but it does get used as a truck and it has had its fare share of off road duty in the time Ive owned it.I dont care for the wheels that are on it,but the truck need tires badly when I got it and these came very cheap(free kinda cheap).I do like the look of a larger wheel on it a...

slammed98gmc

specs 2001 sonoma leather seats updated overhead console with trip meter cut out flares 3.73 gears zr2 rear axle...no spacers 265/60/18 long trails with 18x8 wheels with 5.5bs soon to be whereing some 325/60/18 tires( most likely on some black helo maxx 6 wheels) 5.7l l31 swap in the near future( bo...

slammed98gmc

slammed98gmc

slammed98gmc

slammed98gmc

slammed98gmc

slammed98gmc

Well I guess that I am almost there then.It was there and then it dissappeared on me.Thats cool.

slammed98gmc

what happended to my signature?I cant find it in my profile?

slammed98gmc

i will get some pics posted up with some specs soon.It kinda looks funny now with the lift,flares and 30" tall tires.

slammed98gmc

nevermind,i found the shocks by typing in only part of the pn.

slammed98gmc

well first of all welcome to the "crew" 8) don't know about the shock numbers but i sure would like to see some pics! and you're planting a 350 in your crew!?! that thing will run like a scalded cat!!! i'm sure someone on here will fill you in on the vitals. just wanted to say howdy and PLEASE post...

slammed98gmc

I'm not sure what you asking for. If you are asking for the part number for the superlift shocks, I can't help you, but if you want the part number for the bilstien shocks that go with 6" superlift, I can give you the number that's on the shocks. front- F4-BES-6248-H5 rear- F4-BES-6252-H5 Hope that...

slammed98gmc

Does anyone know the pn for the superlift ss shocks.I bought a superlift and installed it with the superlift shocks and they are not balanced very well.Truck rides really stiff in the rear and floats in the front down the highway.I would like to find a better balanced set of shocks and see what that...

S-10CREWCAB.NET

Search found 31 matches

engine wiring harness

few updated pictures

Any ever tried to intall multiple shocks up front?

slammed98gmc.com

broken front driveshaft

Superlift bilstien shocks