S-10CREWCAB.NET

rlrnr53

I would like to wish everyone Merry Christmas, and here's hoping that you all have a great New Year!!!!

rlrnr53

Have you checked the timing chain? it could be stretched

rlrnr53

Center High Mounted Stop Light

rlrnr53

Merry Christmas to all, please don't forget the reason for the season.

rlrnr53

Update on the Colorado, highway mileage about 23 mpg, around town, around 17-17.5. Better power, and a much better ride. The only thing I don't care for is the after market radio. I'll try to find an OE radio which would suit me better.

rlrnr53

Can't help you Roadrunner, as I traded my Sonoma for a 2012 Colorado about 3 weeks ago.

rlrnr53

I'll still be checking in about once a week, been here too long to quit cold turkey.

rlrnr53

It's with great sadness that I said goodbye to my crew yesterday. Too many things needing attention that I couldn't see spending any more money on it. It needed a complete exhaust, rear calipers were starting to stick, started to leak gas at the filler neck when filling up, and it developed a drive ...

rlrnr53

I have the same problem, but nothing to mount the clips to. I got a fiberglass repair kit and used the fiberglass mat to reattach the flares to the bed. My body work isn't the greatest, but at least the flares don't wave at you going down the road.

rlrnr53

I've run into the P0300 a couple of times in the last couple of months. It only pops up when I'm on a pull above about 3400 rpm. Can't really feel a miss, but it has been sluggish at times. I replaced the cap, rotor, wires, distributor, and spider when I replaced the intake gaskets. Fuel pressure wa...

rlrnr53

I've never seen a copper line with a steel liner in it, the only other thing I've seen has been a double strength copper, but it too fatigues fairly quickly.

rlrnr53

Copper doesn't have the strength of steel, plus it is subject to fatigue failures. It is not allowed in W Va. for brake lines at state inspection. I have seen many failures of copper when used as brake lines, as the practice was common here because copper is easier to bend and flare.

rlrnr53

Check with NAPA if there's one near you, a few years ago my local store could mix paint and put it in a spray can.

rlrnr53

While trying to get a state inspection this morning, found out that the spring shackle on the left side had rusted almost entirely away. $48.00 and three and a half hours later problem solved. It also got rid of the popping noise that had developed after I spent three days in May replacing a few thi...

rlrnr53

Thank you for being a RockAuto customer! To show our appreciation, we have a special discount for you. Your discount code is: 320163302877073 How to Use Your Discount Code Enter the code above in the "How Did You Hear About Us?" space on the checkout page (above your payment information). Do not ent...

rlrnr53

Until a couple of years ago, I was getting 15-16 round town, best mileage on the road has been almost 21, best I've been able to get in the last year or two has been about 18.

rlrnr53

Finally got time to slow down and work on the truck. Intake gaskets, water pump, radiator, aluminum distributor, spark plugs and wires, valve cover gaskets, and spider. Hadn't planned on replacing the spider, but had a P0300 and it was the only thing left after diagnosis. The radiator was giving me ...

rlrnr53

My ongoing project for now is fiberglassing the rear fender flares. I figure that a few dollars for fiberglass mat and resin is a lot cheaper than 500.00 ea. for new flares. Besides, there's not enough of the bed left to attach new flares to.

rlrnr53

Thank you for being a RockAuto customer! To show our appreciation, we have a special discount for you. Your discount code is: 303258172877073 How to Use Your Discount Code Enter the code above in the "How Did You Hear About Us?" space on the checkout page (above your payment information). Do not ent...

rlrnr53

Probably a Canyon or Colorado, my wife and sister have trouble getting in anything that's high.

rlrnr53

Finally finished bearings, seals, new park brake shoes, and rear rotors. Took a couple of days because had to do it in the driveway. Park brake shoes were down to metal on driver's side, and oil soaked on passenger side. Glad to get finished. Just have to replace intake gaskets, distributor, all new...

rlrnr53

Check the lines on the transfer case switch. I have seen them turned and forced on the switch, which can lead to a noise like you have.

rlrnr53

Thank you for being a RockAuto customer! To show our appreciation, we have a special discount for you. Your discount code is: 291944092877073 How to Use Your Discount Code Enter the code above in the "How Did You Hear About Us?" space on the checkout page (above your payment information). Do not ent...

rlrnr53

Nice job!

rlrnr53

Went to pick up my grandson at school today, after sitting and listening to the radio for a while, no start. After getting a jump and getting home, voltage at the battery was anywhere from 13.5 to over 20 volts. At least the alternator was easy to change. 2 bolts, one nut, a wire connector and 10 to...

rlrnr53

Your RockAuto discount code 259827922877073 will expire on December 14, 2014.

rlrnr53

Sounds like the sensor on the dash is bad or something is blocking it. It works on UV light instead of ambient light.

rlrnr53

Thank you for being a RockAuto customer! To show our appreciation, we have a special discount for you. Your discount code is: 259827922877073 How to Use Your Discount Code Enter the code above in the "How Did You Hear About Us?" space on the checkout page (above your payment information). Do not ent...

rlrnr53

Thank you for being a RockAuto customer! To show our appreciation, we have a special discount for you. Your discount code is: 257925652877073 How to Use Your Discount Code Enter the code above in the "How Did You Hear About Us?" space on the checkout page (above your payment information). Do not ent...

rlrnr53

It's not easy to get to, the driveshaft might be the easiest.

rlrnr53

Not a hard job, just a little daunting if you haven't done it before.

rlrnr53

Haven't thought about a holster yet, but those look like a good choice, affordable, and a good warranty,

rlrnr53

Ok guys, I need a little advice. I'm going to get my concealed carry permit, and have tried a few pistols out. So far the one that feels the best to me is a 9mm S & W shield. After checking the shops around here, I've decided to go with a new pistol. All of the used guns cost more than the S & W. An...

rlrnr53

That was my guess. How much snow did you get? We got a total of 18-20 in. here.

rlrnr53

Woke up to a foot of snow Thursday morning, started to take the wife to work and guess what no 4wd. I've known that I needed to change the transfer case shift motor for a few years, but have put it off for one reason or another. Well I finally bit the bullet ant bought a reman shift motor and borrow...

rlrnr53

Working at a dealership many years ago taught me that I had to be self reliant.

rlrnr53

I'm looking to have to do the same this spring after the Subaru head gasket, Equinox shocks and struts, and Focus timing belt and belt adjuster.

rlrnr53

My prayers are with you. I know how trying these times are, because I lost my oldest sister the first part of December. On top of that, one of my girls left for basic training the 30th, and the other one leaves the 6th for her basic.

rlrnr53

Do you remember how it goes back together?

rlrnr53

Your RockAuto discount code 147417592877073 will expire on June 30, 2013.

rlrnr53

Thank you for being a RockAuto customer! To show our appreciation, we have a special discount for you
Your discount code is:
147417592877073

rlrnr53

I would appreciate the help, retirement is nice, but the fixed income sux!

rlrnr53

Started hearing a bearing noise from the front of the truck a while back, so I ordered a couple of bearings. It got progressively louder, so yesterday I replaced them. The left side went well, it was a little tight, so I started on the right side. When I got the right side rotor off, there was greas...

rlrnr53

Congratulations

rlrnr53

Congradulations!!!!!!

rlrnr53

The composite guns are nice, we started using them about 3 years before I retired. At that time, they were still going strong.

rlrnr53

I've been tracking my milage this year as I've been doing some contract work. I usually have to drive at least 40 miles one way any where in elevation from 2400 ft where I live to as high as 3300 ft, and as low as 1100 ft. I've been averaging from 16 to 18 mpg on these runs. If I do much driving loc...

rlrnr53

Discount on RockAuto Parts! Thank you for being a RockAuto customer! To show our appreciation, we have a special discount for you. Your discount code is: RockAuto uses Customer Lobby to measure our performance. Please take a moment to complete a short survey: 133717672877073 Using Your Discount Code...

rlrnr53

I've used these repair lines on DOH trucks and didn't have any problems with them.

rlrnr53

A couple of weeks ago, I was at my winter job of monitoring antifreeze solutions for coal trains. We finished loading the train and I was sitting in my truck finishing my paperwork. After finishing, I took the copy to the mine forman. I come back to the truck and nothing but a click. I got a jump an...

rlrnr53

If I remember right there used to be a thread here somewhere about pulling flash codes by crossing two terminals on the ALDL connector and reading the number of flashes on the switch lights. I can't remember where it is located on the forum. OK, look at the sticky on transfercase codes at the top of...

rlrnr53

They might be world class, but a lot of them lack common sense.

rlrnr53

Went out Saturday morning to get a couple of things for Christmas, and found out that I only had high on my heater. After getting everything done, it was off to Auto Zone to get a new resistor for the blower motor. Ended up changing it out in front of the store withe their tools. I'd like to meet th...

rlrnr53

Here's wishing everyone here a Merry Christmas ! But please don't forget the reason for the season, and Happy New Year too.

rlrnr53

Horsehammer you are so right

rlrnr53

Nice!

rlrnr53

I would like to wish everyone here a Happy Thanksgiving.

rlrnr53

A year later, and another Wally is on it's way to Iowa

rlrnr53

Thank you Reed, you and yor better half are in ours too.

rlrnr53

Thank you Reed, she is doing better, but still not completely healed. As for me, 14 hrs after entering the ER, my stint was in and I was iback in my room, 5 hrs. later they had me out of bed,so I feel blessed.

rlrnr53

Rotors appear to be good, if not, it'll have to wait until the money situation improves. A mild heart attack and some medical problems my wife had in late June have put us way behind.

rlrnr53

Today is brake day. I got out of the truck yesterday and as soon as I opened the door, I knew somwthing was wrong. Went around to rhe right side, and the right front brake was smoking. I'll change both front calipers and new pads, and hopefully that will take care of the problem.

rlrnr53

Halloween in So. W Va. was 18-20" of snow on the ground. Halloween was moved to Saturday evening even though there were many places still without power.

rlrnr53

A local radiator shop reccomends liquid Dawn dishwashind soap. We tried it on a grader that had a ruptured hyd. oil cooler, and it worked wonders removing the oil.

rlrnr53

Here in southern West Virginia, just wind and about 16" of heavy wet snow. So far we haven't lost power here, but there's about 60,000 around the state that have. While I was out this morning, I passed power crews from Texas and Arkansas that were brought in to help restore power.

rlrnr53

Looks like agreat getaway! Would love to see the western part of our great nation.

rlrnr53

Maybe They'll go west instead!

rlrnr53

They should be starting south soon.

rlrnr53

Reed, prayers going out for the both of you. If there's not fluid on the ground, I don't think that it is a problem. I'm in agreement with HJ that it may only be a case of slightly over full in the transmission.

rlrnr53

I left about 6:30 am, got back about 6:30 pm. One of the most organized yards I've been too, too bad it's 225 miles away.

rlrnr53

I got mt road trip today. Beckley, WV to Charlotte NC for a ftont axle for my daughters Grand Cherokee, all 450 miles of it.

rlrnr53

You gus are lucky, my cc gets anywhere from 20 mpg on a trip to about 9 mpg during the winter warming up. Any where from 12 to15 mpg around town.

rlrnr53

Congradulations!!!!!!!!!!!

rlrnr53

The Woodward Dream Cruse is awsome! If you watch long enough, you'll see just about anything on wheels. I'd love to go again, but thats a long shot for the near future.

rlrnr53

Welcome, good to have you aboard!

Search found 524 matches