S-10CREWCAB.NET

GeorgesBlazah

Ok will do. I just replaced them anyway since I did my oil cooler lines.

GeorgesBlazah

Ok great, ill probably order mine today then. Ill keep you guys posted. Thanks!

GeorgesBlazah

Finally had a chance to get this KKS radiator in. I must say I really like the fit in the truck, no modifications were needed. The only thing I would suggest is use the factory cooler quick connects. I didn't have a problem with the engine oil cooler ones but the trans ones both leaked badly. I'll ...

GeorgesBlazah

That stinks...the job is a lil big, but not that bad entirely. Let me know if ya decide to do it yourself, I could maybe swing by and lend a hand.

GeorgesBlazah

Martin! You made it over here!

The truck in person is sweet. Its pretty friggin long lol

GeorgesBlazah

Yeah its a 2.2 5spd I get ~24 in town with it, hwy ~30 depending on how fast im going. It handles great, its got the ZQ8 suspension and I lowered it more with spindles and blocks. Id like to autocross it one of these days, but im gonna need some better brakes because of the bigger wheels.

GeorgesBlazah

I am sorry for your loss.

GeorgesBlazah

Daily Driver

The gas miser. Id like to get a bike one of these days.

GeorgesBlazah

Voltage was always normal on the gauge. I did have a high output alt, but that died a few months ago.

GeorgesBlazah

Yeah I was planning on a ZQ8 box. My s10 has one and I like it. Dont know how it will feel in Blazer, but I like the way it drives in the s10.

GeorgesBlazah

Right now I have an Optima, however the issue was there before I put this battery in there. Thats werid that is happend twice, but it make sense because im pretty sure I had the same batt in there both times.

GeorgesBlazah

Worm style? I need to do some maintience to Blazer...shes been neglected. Need new rear pads, new steering box, wheel bearings and probably an idler arm lol. I also need to change the other fluids, axles, tranny etc.

GeorgesBlazah

http://i6.photobucket.com/albums/y208/GeorgesBlazah/edfcd29f.jpg http://i6.photobucket.com/albums/y208/GeorgesBlazah/4d34f01c.jpg OK those pics are about 2 years old...not as old as they are dated. It has only gotten worse...no leaks yet. I already had the tanks replaced once when i first got it. I ...

GeorgesBlazah

I had to replace my blend door motor, but I would replace the controls before I did that. It was a pita to do it.

GeorgesBlazah

Welcome!

GeorgesBlazah

That Brazilian S10CC is badass.

GeorgesBlazah

Sweet!

GeorgesBlazah

Welcome! I feel your pain with sinkin your truck in water....Ive been known to do that haha. Id love a desiel in the Blazer.

GeorgesBlazah

Ive got the smoked brazillian tails on my s10!

GeorgesBlazah

Nice! I am still tryin to find some for my DD, but Ive had no luck yet.

GeorgesBlazah

Yeah I ended up buying a cover with a drain plug and bearing support studs on it. Was kinda exspensive, but I like it.

http://i6.photobucket.com/albums/y208/G ... G_0664.jpg

GeorgesBlazah

No dice....I just called

GeorgesBlazah

If they are in stock I am buying them.

GeorgesBlazah

We used to have a cat just like that!

GeorgesBlazah

I wish they had soem big flares for 4 doors

GeorgesBlazah

129k here! Havent had any major probs. The starter did die about a month ago though...thats about it.

GeorgesBlazah

I would have so much fun in tha thing. You think I can pass inspection with them? lol

GeorgesBlazah

Nice pictures, but when I click on one to make it bigger its not working

GeorgesBlazah

Wow thats a heck of a crappy job done by the dealer. Have you taekn it back yet?

GeorgesBlazah

What kinda performance are you going for? Offroad or HPwise

GeorgesBlazah

Or locally too. I jsut recently rebuilt my wrecked daily and I got a bed, hood, fender and inner fender for 250! Craigslist works wonders too!

GeorgesBlazah

barch97 wrote:
GeorgesBlazah wrote:Someone guess mine!!
bought your truck with your Bush tax refund?

bwhahaha

GeorgesBlazah

oh oh oh!

*sends HJ a friend request*

GeorgesBlazah

That deosnt sound bad at all. The bumper is held on with about 4 bolts in the center and another two behind it in each wheel well. Sounds like a couple hours worth of work...shouldnt be too bad.

GeorgesBlazah

Someone guess mine!!

GeorgesBlazah

Ive been tossin around the idea of gettin some custom plates for the Blazer...I know what I want, just dont feel liek going to the DMV and getting the plates. I am going to get NOTSAFE on mine.

GeorgesBlazah

Very Nice.

GeorgesBlazah

My fans are still going strong! I did have the same issue that Reed did with the connector melting. Mine melted together to the connector next to it. Good thing I caught it befor the Rausch Creek Trip I was going on. Not sure of the gauge wire I used, I woud need to double check that again.

GeorgesBlazah

I know Im late, But they use factory control arms. They are pretty close to the shock too...Id like to get a set of the BDS arms and put them on.

GeorgesBlazah

I contemplated a 5 or 6 speed in my Blazer for a while. just dont know if I would like it offroad being that Ive never driven a stick offroad.

GeorgesBlazah

heh...never heard o the pad being cyroed

GeorgesBlazah

Youll love those pads. I have the same ones. I am lookin to get some rotors next.

GeorgesBlazah

Nice! I think those would be alot more fun with a big spring on the bottom of them. lol

GeorgesBlazah

link't image over 100k forum limit

link't image over 100k forum limit

Ive got the 6in SL. Its been used and abused with no failures to date. I have the Bilsten shocks and it rides great! Wheels have 4.25in BS.

GeorgesBlazah

The Blazer is due for some new plugs/wires/cap/rotor...the whole shabangabang. I had the Bocsh plat 4 and then I switched em out cause I didnt like them. I ahve AC delco Plats in tehre now...no probs. WOuld you guys rate the Delcos higher or lower than the AUtolite XPs? Any reccomendations for wires...

GeorgesBlazah

I would like to see a beefed up version of our front end using fullsize parts. Balljoints, cv shafts, wheelbearings and the front dif......Hell even pitman.idler arms. If there was something like that, that I could use with my SL6 I would be all over it.

GeorgesBlazah

Stock is 7. I am running an 8in wide wheel. Any bigger and youll have more rubbing issues.

GeorgesBlazah

Im not gonna look because I will cry. We didnt get any snow...just a mix of BS.

GeorgesBlazah

Isnt there the needle under the hood that if you press it in gas will come out? Looks like a bike tire vavle stem? I wanna say schreader valve, but im not sure? maybe someone else can chime in. Do you hear the fuel pump buzz when it deos the no start?

GeorgesBlazah

psssst

http://www.s-10crewcab.com/phpBB2/viewtopic.php?t=5225

GeorgesBlazah

purduecrew wrote:Every move you make,
Every breath you take,
Every single day,
Every step you take,
Ill be watching you.

-Facebook

gotta have it to get the joke

Soooo true lol

www.myspace.com/greekashell

GeorgesBlazah

Pic 1

Pic 2

Pic 3

Pic 4

Pic 5

A nice one we got of my friends 'Stang.

Mustang

Sorry Mods, I cant figure out the code to shorten down the links. Someone PM it to me please.

Shortened links. -W

GeorgesBlazah

Buy my Blazer!

That damage stinks but Im glad your ok. Hey at least you dont hafto get new tags!

GeorgesBlazah

.........Still a nice truck :thumb: A true understatement. As much as I despise "bling" I have always liked Steve's CC :wink: Thank's Hj and f9k9, I have been accused of being a picture post whore so I am kinda careful about posting to many pics of my ride. I wasn't going to post in the reader ride...

GeorgesBlazah

How Many Of You Have Changed That? 1 Here Are You Running Spacers? Only on the rear Have You Put Aftermarket Wheels On? Yes, 16x8 ZQ8 wheels If You Have Changed It What Is Your Backspacing Now? 4.25 Are You Running Cutout Flares? No How Big Of A Tire Are You Running Now? 34x12.5 Any Problems With Ba...

GeorgesBlazah

Glad your ok and that no one else was hurt! Tkae it easy fora lil bit until your feeling better.

GeorgesBlazah

I have a pushbuttom 4x4 switch if anyone is looking to replace theirs. It works, jus tthe 4hi, 2hi and 4lo lights dont light up, but the amber indicators work. Sorry to hijack.

I havent had any problems with my 4x4.

*knock on wood*

GeorgesBlazah

Holy old thread Batman!

BTW is he still selling these?

GeorgesBlazah

They look like bushwhackers to me. Im pretty sure they made some big ones a couple years ago.

GeorgesBlazah

http://i6.photobucket.com/albums/y208/GeorgesBlazah/79e0e432.jpg Owner: George Papamihalakis Location: Vineland, NJ Make: Chevrolet Model: S-10 Blazer Year: 1998 Engine: 4.3L Vortec Trans: Auto Tires: 305/70/16 Super Swamper SSR(measure out to a 33.5) Wheels: 16x8 Chevy ZQ8 wheels (4.25bs) Suspensi...

GeorgesBlazah

I concur, I will post up a nice one of my 4 door as long as you crewcabbers dont chase me away for not having a bed

GeorgesBlazah

I dont see why that car is worth so much. If I read it right it was a regular Camaro and the guy had a real ZL-1 Yenko engine put in. Now I know the engines are worth some $$, but would this car just be a replica and not a real Yenko ZL-1 Camaro? Im a n00b to this.

GeorgesBlazah

Pic 1
Pic 2
Pic 3
Pic 4
Pic 5
Pic 6
Pic 7

The quality isnt so good cause its from my camera phone, but you get the idea.

GeorgesBlazah

Hey guys I helped deliver that car that day

I got some aftermath pics if ya wanna see em.

GeorgesBlazah

Im still driving my first car!

GeorgesBlazah

I just found my new cologne.

GeorgesBlazah

There is alot of places to order the 2in BL from. I usaully check www.4wheelcustoms.com I am sure there are other places as well, but I have had good luck with them. A body lift puts blocks between your body and frame which raise it higher to clear bigger tires and leaving your factory ride the same...

GeorgesBlazah

Jigg wrote:Looks sick... what'd you end up working out for the HID's? Is it one of those kits?

Its something that another member put together for me.

Here are some night shots.

Night1

night2

night3

It may not look like it, but with everything on it is very bright.

GeorgesBlazah

The headlights are HIDs and I am using PIAA 520s(bigger ones) and 004XTs(small ones).

GeorgesBlazah

The sway bar gets lowerd with the suspension lift. Thanks Gairbear!

GeorgesBlazah

Lights in

Pic 1
Pic 2
Pic 3
Pic 4

Gonna have some nighttime ones tonight.

GeorgesBlazah

Duplicolor has that wheel paint thats supposed to work pretty good. They have a graphite color, but I dont know how close ti matches the flare color.

GeorgesBlazah

Cool, where abouts in South Jersey?

GeorgesBlazah

bling bling....let the mods begin! I have a bigger airfilter on the way and I am researching pipes. When I get some time, I am going to tear the motor apart and do a port and polish :D . I am also going to make a "ram air" intake for it. I was running it without the body and it seemed to run faster...

GeorgesBlazah

Nothing

S-10CREWCAB.NET

Search found 193 matches

Re: Radiator upgrade

Re: Radiator upgrade

Re: Radiator upgrade

Can someone explain why my rad is doing this?

A couple cool moving pictures

let there be light