S-10CREWCAB.NET

T-bone02

got mine today, almost tore it up thinking it was another extended warranty policy they were trying to sell me. I'm glad my wife's patient enough to read all that crap!

T-bone02

My first vehicle was an '88 bronco II. It also had the step on the back bumper. My buddy also has an '87 with it also. I'm pretty sure any bronco II 90 or earlier should have the step as long as they had the swing away rear spare tire carrier.

T-bone02

I just wanted to make sure that these were the right spacers for my crew before i order them. These are the ones everybody recommends but just wanted to double-check about the lug pattern and stud size and such!! I don't know if I need hub-centric or not either? I want to order some ASAP so give the...

T-bone02

looks like it might be dexcool? I had I problem with my driver side tank leaking just below the top of the tank. Instead of buying a whole new tank, went ahead and did the radiator upgrade. Best mechanical mod yet i've done:)

T-bone02

I found my skid plates at a local salvage yard. I lucked up on a 99 blazer with the front, diff. and trans. case shield. However after contacting my local dealer they found a whole shield set including hardware and instructions in Cal. The parts manager had it off the dealership property at their st...

T-bone02

ok thanks for all the info, hopefully i'll get a chance sunday to finish this project

T-bone02

thnx, I didn't remove the screw in the armrest, couldn't find one. what about the theftlock feature though? I don't know if my radio has it or not. When I cut my truck off a little red light blinks on the radio. It's an RDS cd/cassette player without the disk changer. I'm afraid to unhook my battery...

T-bone02

Today I was attempting to remove the passenger side rear door panel in an attempt to splice in an audio inverter that would allow me to run rca cables to my amp, which I have placed behind my rear seat. Running the power wire to my amp was no problem, but when faced with the decision of connecting t...

T-bone02

sorry snow, but my camera has been loaned out for months. What I can tell you is that when you hold the hitch up to the frame, slide it all the way back to the rear bumper. Then you can see that on both ends in the rear(bumper end) of the hitch you will run one bolt horizontally through last predril...

T-bone02

Glad you got one ordered. I saw the in stock hitch that was the universal one and it is definately one you DON'T want. It's got three thousand holes in it because it fits probably 20 gm trucks, too much hardware to fool with. The hitch bolts up really easy, just make sure to remove your spare before...

T-bone02

My 98 blazer did the same thing, it would drive me crazy especially when I touched the b-pedal lightly and it sounded like I had a welder in my truck. Crazy enough,one day when I was pulling a trailer something happened and a stream of smoke started coming out of my steering column on top at the haz...

T-bone02

Since your fuel pump is so loud, go ahead and make sure to change your fuel filter regularly!! On my 98 blazer when my fuel pump got louder than normal, I ended up putting in a new one within a few weeks!!!! Bummer :?: Learned a trick from my mechanic though that week that i paid the towing fee to m...

T-bone02

You were right henry, I got underneath this morning after I turned my key to access. and heard a hiss from unerneath. I removed the t=switch and reinstalled. I guess one of the lines wasn't connected completely. Drove it home on the interstate and NO PROBLEMS. I''ll keep my fingers crossed though. T...

T-bone02

replaced old t-case vaccum switch today with new one, also replaced a/c head unit with one off ebay. I figured that if my original unit had fluid damage I could go ahead and replace it all at one time. Well, on my way home from work tonight i'm running 75mph or so down the interstate I hear an all t...

T-bone02

If anyone want a good deal on a class III hitch, head down to your local Advanced Auto Parts. I picked one up yesterday along with a plug and play 4 way flat harness that plugs directly into the factory tailight harness on the driver side all for $140.98 out the door. Pretty reasonable I think consi...

T-bone02

Hey guys, I understand everything except the connection behing the dash. Does the plug connector at the bottom of the pics plug in behind the a-piller, or under the dash at the connector for the hpIII programmers?

T-bone02

Will these fit my crew, you'll said hub-centric provide a better fit and the way to go for a few xtra bucks!!

http://cgi.ebay.com/ebaymotors/ws/eBayI ... AMEWA%3AIT

T-bone02

previously before my crew I had a 98 blazer with the overhead compass. However, since it was an LT model the console not only had the compass display, it also had selections for average mpg, distance till empty, average speed, fuel used, ect. Is I possible to get our overhead consoles to do these ca...

T-bone02

I just turned 23000 mi., but when I bought the truck I found that I had a leak and finally figured out where it was coming from.

T-bone02

If I quit running dex like everyone suggests, are there any preps that I need to do to my original radiator besides draining and a good flushing. How can I be sure that I have flushed all of the dex out of my cooling system, heater core, ect.? What brand do you'll suggest? My radiator is leaking on ...

T-bone02

what size b/l do you have and what size spacers do you run in the front and back? Truck looks great by the way!!!!!!!! Are those flares the ones that listed in the mods page? No more questions I promise, lol!

T-bone02

Hey guys, I had my mechanic tighten my tbars the other day while I was having some MORE repairs done to my crew with only 24000 miles. He adjusted them so that I got about three quarters of a lift in the front, but he didn't raise them all the way. He also said that If I go any higher i'll need to g...

T-bone02

I was looking at some pics in the album and saw the pics or Rock's crew!! That truck looks great. Just wondering what size tires he has because it doesn't look like he's got a b/l. Also curious what king of fender flares he has installed and if he's running spacers? The flares look like a very snug ...

T-bone02

I think i've read a discussion on this problem before, but anyway I was running my heater on the way home tonight and when i went to change the air direction from the top to the floor so the hot air wouldn't blow in my face nothing happened.? I could feel a little air from the floor vents, but nothi...

T-bone02

Dang, you guys are quick!!! Thanks for the info.

T-bone02

Just my luck, lost my keys the other day along with my keyless remote to my crew. Only came with one from the dealership cause I bought it used. I have both remotes from my '98 blazer I traded in on it. Was wondering If those remotes will work with my '02 crew, even though the blazer remotes have on...

T-bone02

Man that b/l makes a huge difference, great looking truck Crew. By the way what brand b/l did you buy and how $$ did you spend total on kit and install?

T-bone02

For right now i'm gonna leave my crew on the frame, a body lift maybe next year. Just curious if I can fit 30*9.50*15's under it with out any rubbing or loss of articulation with It sitting stock? I thought about buying a set of cooper disoverer radial st's. Pretty good looking tire I thingk. A litt...

T-bone02

I've had my crew for about 2 months now. During hot days when im in city traffic my crew sometimes runs up above normal, around the 210or220 range. As soon as I hit the open highway it cools down. Anybody else with this problem. I d like to get one of the 180 degree thermostats youll talk about but ...

T-bone02

Does anyone know how dependable and effective the all in one radiator/tranny/oil cooler is? I've got a 16 foot aluminum bass tracker and don't want to over heat anything? Will this factory system be sufficient for short to meduim hauls?

T-bone02

After reading all the popular mods I decided to start tday and went to a local salvage yard. I guess My luck has changed lately and I found a '99 Jimmy with all the aluminum plates. I picked up the fron, engine and trans. case shield today, along with a stock full size spare off an older late 80;s m...

T-bone02

Iwas thinking of getting some regular s-10 length bed cap, chop sawing them and then powdercoating them along with the toobox

T-bone02

Welcome to the site! What kind of gas mileage are you getting right now? My gas mileage has improved alot over stock with the mods I have. I used to get 14/16 city/hwy, and now I get 18/20 city/hwy. ---------------------------------------------------------------------------------- So far the driving...

T-bone02

Hey guys thanks for the info, I figured that the system was whack, just seemed to simple to work correctly. Hopefully I'll have good luck with my crew. The mods you'll show seem great, especially the wheel spacers, A MUST!!!. I'm not a big fan of body lifts but I think that these trucks look great w...

T-bone02

Hey guys, This is my first post because I'm new. I'm looking forward to getting to know everyone and learn all the tricks and cool mods! I just bought my truck in August and so far things are pretty good. It's an '02 one- owner with 19800 miles on it. All stock, no mods, just how I wanted to buy one...

S-10CREWCAB.NET

Search found 35 matches

Are these the right spacers?

rear door panel removal for speaker access

Front axle partially engages solved

TOW HITCH AND HARNESS

overhead console w/ trip computer

re:

new coolant

Adjusted torsion bars?

Rock's '02 ZR5 tires and flares

vent controls

keyless remote

keyless remote?

new tires?

running warm

oil and tranny cooler

Skid Plates

toolbox

Bad gas milage

Posi-lock engagement system