S-10CREWCAB.NET

I got the cheap ones from the dealer too, and im pretty happy with them so far...

i got a maap grill guard that attached to the frame. it is on tight, in fact you can jump on it and it moves the whole truck, no play whatsoever...

I had the same problem on my 99 S10. The bottom trim snaps into place and after rolling the window up and down so many times, the snaps, snap. Anyway the dealer will replace them as long as you are still under warranty.

i was at the home depot last week and a guy in a green dodge ram backed into the front of my truck. luckily i added the push bar or he would have put his hitch right through my front bumper cover. i have pics of everything if anyone is interested. btw - he left the seen and is now wanted for leaving...

while on the subject...



my 99 s10 ext. cab 4x4 had the 180hp engine, but it was also a manual. from what i understand, 4x4 automatics get 190, 4x4 manuals get 180, but thats been 4 years ago, so maybe they did change it

Ok this is what I finally settled on... Picture http://us.f1.yahoofs.com/users/50643017/bc/Yahoo!+Photo+Album/P1010016.jpg?bcyw1Y.AYrSTXn57 Made the long addy a link-HJ Also the bracket has two sets of holes, so if I get the 2 inch lift I can raise it also. Its made by MAAP and cost about $350. Ther...

I looked into it already. The front ZR2 flares will fit and align up with the holes you have now. The front consists of 4 pieces, 2 on each side. There is the flare itself and a smaller piece for the lower facia. The rears im not sure of. Anyways it was way to expensive, $300 for each flare plus $60...

well I think the question that everyone wants answered is:



Did it come with the orange cone in the bed or was that extra?



-Slick

good luck getting your hands on one of those babies. i got 2 neighbors that have them if anyone wants to help me out one night. I just buckled and bought a push bar from maap for $350 and put some lights on it the other day. ill post some shots when i get my camera back from my dad. he stole it to g...

well so far, as with many, i had the rear pass. weatherstripping replaced. also the 4x4 module went bad and it wounldnt shift into 4 hi or 4 lo and my third brake light went out.



other than that everything is cherry.

GM uses the last 5 digits of the vin to sequentially number their cars and trucks every year.

I order the molded flaps all around from GM and they told me they wouldnt fit, so I ended up the the other ones they sell instead. I think it cost me about $30 installed at the dealer. Ill get some pics out to you guys.

Thats why you should have gotten a GMC cause we only got 1 light housing per side.



Dont forget to put the 55 watt foglight bulbs up front while you have it all ripped apart.

If you are really that worried about pulling your boat out of the water, why dont you just drop it in 4LO. As long as you go slow and dont turn too much you should be fine, and I really doubt youll get any wheel spin in 4LO just keep it slow and straight.

Ive been looking for a punch too, and I havent found one to fit the GMCs yet. I want it to look like the Envoys or Denalis since they come with them, but I cant find one either.

GM also showed the Chevy Colorado and the GMC Canyon. They have pictures at www.GM.com on both and a 16 liter, 1000 hp Cadillac.

Here is the general idea of the one Im getting. The differences are the ones for our trucks are a bit smaller, it doesnt have the brushguards, and the crossbars are stainless steel instead of black. Hopefully it matches up with all the ZR5 stuff already on my truck. http://www.maapautomotive.com/200...

I have a dei viper that i ripped out of my 99 s10 before turning it back in. i think it has the remote start option with it, but my 99 was a manual so they didnt hook it up last time. anyway whats the going rate if i drove up to you?

Well I finally found one that matches the brushed aluminum sidesteps and bedrails. I ordered it from MAAP and it will take about 3 weeks. I get some pics once its installed.

Well I dont have the luxury of putting in a clear corner on a sonoma, but while you guys are down there ripping stuff apart, I thought Id share something... The stock fog light is an 881, 27 watt bulb. I replaced it with the 885, 55 watt bulb. It makes a big difference, people keep flashing their hi...

More than likely youll have to replace it. I never had a problem in my 99 S10 and I dogged on it bad, really bad, but I got rid of it for my crew cab. I had some clutch problems in the past though. I had an old Ranger with a snow plow on the front and my brother was plowing in 4HI and smoked it. The...

I have the ZR5 and I dont know that you would even call it a bumper. I had an extended cab s10 4x4 before this one, and it had the painted front bumper and it was actually a bumper (I know cause I dented it). I took the bumper off my ZR5 a week ago, and its just a piece of plastic. I was pretty disa...

Ive given up on trying to get the Diamond Edition grill guard. I think I found one I like. Go Rhino makes it, but everyone seems to sell it with the brush guards and I just want the grill guard. For anyone who is interested... www.gorhino.com its the 3000 series, model number 3145B I believe.

There are several around here. The other day some woman was driving a green S10 with a hood protector, vent visors, flaps and a topper. Anyway I saw a blue S10 without leather and the ZR5 on a Ford dealers lot selling for $23,000. Good news for me because I wrote the check for $22,000 and thats afte...

Well the good ol boys at GMC told me that I needed a few things to get a Diamond Edition Grill Guard. First I needed the VIN off of one cause GM wont ship them without knowing its actually going on a Diamond Edition Second the guard itself will set you back $800! By the time you get the bracket and ...

I just put them on the other day, and they look pretty good. I got the set from AutoZone for $45 for all four windows. They had to order them, and it takes about a week but Im happy with them so far...