S-10CREWCAB.NET

Blaze One

it probably should not look like this inside the intake ... looks like my problem is a leaky injector https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash3/577240_3115906379080_1307078335_32215495_587917822_n.jpg https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/578257_3115904979045_1307078335_322...

Blaze One

ok thanks .

I am going to wait until it is dark out , then see what I can find in terms of a arc or sparking .

Blaze One

well ... no good news . i replaced the cap and rotor - they were in rough shape https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/389316_3094110714202_1307078335_32207991_952502640_n.jpg https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-prn1/560772_3094114314292_1307078335_32207994_1630964749_n.jpg...

Blaze One

i took it to the mechanics and had it scanned ... there is a misfire on the #1 cylinder . mechanic said my plugs are all in good codition , but the wire to #1 is fried . So . I relpaced the ignition wires , and the misfire is still there . who knows if the mechanic was B.Sing me or not . secondly , ...

Blaze One

well this morning the truck was running great . no rough idle etc .. drove for about 10 mins and then it ran rough again . i have not had time to look at the plug/rotor/cap etc . but will tomorrow . here is a short clip of what my idle is like at the tail pipe . http://www.youtube.com/watch?v=dJpsCQ...

Blaze One

1995 CPI 4.3 A few days ago : rpm was erractic and jumpy , about 500 rpm when accelerating/driving . Idled fine , but not perfect ( a little rough but drivable ) Today : went to start it and there is now a really rough rythmic idle , and this con't upon acceleration . I would like to do a tune up an...

Blaze One

This is my 3rd s-series truck ...
1995
4.3 CPI
Z85 package

Blaze One

well it has been a few days and the new tstat is working great and my temps are normal . no coolant loss to be seen .

i guess it is on to the next issue . thanks !

Blaze One

I am changing the tstat tomorrow .

I have been driving for about 100miles and so far no coolant has disappeared .

Blaze One

Update: I topped up the coolant in the tank and double check the rad to make sure it was full . squeezed the upper rad hose and burped out some air . started the engine and ran it untill it was warm , burped it gain and added some more coolant to rad and tank . I then drove it for about 60 miles and...

Blaze One

I have noticed the odd bubble the overflow tank when the engine is running . maybe 1or2 small bubbles every 20seconds .

i will get the system checked out .

The upper rad hose is firm , but i am still able to squeez it a bit . Before i changed the tstat , it was really soft .

Blaze One

considering i just changed the stat , I hope it is not faulty already .

The first day I installed the new tstat , i let it idle for 20mins and it reached 180 . today , it would not reach past the 1/4 mark on the gauge .

im baffled .

Blaze One

today the truck was running with the temp gauge around the 1/4 mark or slightly below when on the highway . The outside air temp was 60 degree f . I don't think getting the 180 tstat was a good idea , because i am running so cool now . I have not had any CEL , but running that cool can't be good ......

Blaze One

hmmm.... maybe i should consider relocating the iat thingy ...

thanks for the advice .

I assume there must be many diy on the topic .

Blaze One

Figured out how to reattach the brace bar . Truck is running good with the new failsafe 180 degree tstat . Runs around 160 when driving around town , tstat opens when it should when idleing in heat .

Blaze One

I spent about 5 hours today trying to replace my tstat .... there is a support bar/brace that goes from the belt tensioner to the waterpump . I could not get the the nut off the tensioner side of the brace , so i ended up taking the other end of the bar off the waterpump. I had to bend it out in ord...

Blaze One

I replaced the hoses . It seems i didn't have dexcool in the system , that must have been a old leak that caused the brownish/orange build up you see in the pics . However ... my temp gauge is still reading very hot , almost to the red line . The upper rad hose is COLD . even when the temp gauge rea...

Blaze One

Crap !

I was hoping that was not dexcrud .

The radiatior was replace 2 yrs ago , so atleast it is not old dexcool .

I will change it out for sure .

Blaze One

so this is the mid section of the heater hose . the metal pipe connects two hoses , one attached to the firewall , the other to the engine . But what is this orange/brownish stuff I found leaking out of the hose ??? ( this substance was present before the hose failure ) see pic . https://fbcdn-sphot...

Blaze One

the leak in the hose was so small I could not see it at first . then today , it finally popped and the hole was large enough to let more coolant out and it didn't evaporate before it hit the drive way .

I let ya know how it works out.

Blaze One

well today on my way home , the check engine light came on . the temp gauge was doing the same thing : cool upon acceleration , hot at a stop : Pulled into my drive way , only to see a puddle of coolant under my truck . Turns out that one of the hoses to to heater box on the firewall has a small hol...

Blaze One

1995 CPI 4.3 engine. I noticed my coolant level in the overflow tank was about 2" below the "full hot" mark . I added some coolant up to the line . Drove 80kms , and not the coolant is back down to where it was before i topped it up . Also , the temp gauge in dash would get close to the red when sto...

Blaze One

thanks , i didn't knpow about them.

Blaze One

thanks , don't know why I didn't think of that .

I grabbed the front driveshaft and i was able to turn it by hand . so the 4x4 was NOT activated . Yeah !

Now on to the next issue ...

Finding a replacement 4x4 button cluster for the dash ( bulbs are out and 4lo button is gone )

Blaze One

I tried check for wheel spin , too difficult to do from inside the truck . I guess I could put a mark with chalk on the transfer case axle and see if it is turning . Or is the axle always turning even when not in 4x4 ? I know it does with a "autotrac" transfer case , but what about with the 3 button...

Blaze One

1995 Chev Blazer 4x4 . 3 button . 2hi , 4hi , 4low . Automatic trans . One of the buttons ( 4lo ) is pushed in and will not return back out of the panel . The 2hi button is illuminated currently . The 4hi button , when pressed there is a noise that sounds like it is a normal noise . But the 4hi butt...

Blaze One

thanks .

Blaze One

ok . so i used to own a 99 4dr Blazer ... it was always letting me down and it need to be sold . So i purchased a 95 K1500 Silverado ext cab . Great truck loved it , then crashed it !!! Then I purchased a 2000 VW jetta , 2.0 automatic guttless and pratical . I am in the middle of a trade ( jetta for...

Blaze One

I know what you mean about the Tahoe's , I am very tempted to buy a 2dr hoe , as they are one of my favorite trucks . But the gas cost issue is keeping me away , although you make a good point that a 4.3 V6 in a zr2/ cc / suv etc . is not going to be much better . Plus , with the "fullsize" suspensi...

Blaze One

I sold my Blazer about 3 months ago , after numors problems it had to go . However , I now drive a beater of a 88' Honda Accord !!! It has to go too , it runs great , but no cargo or functionality at all . But good MPG's . So... would you guys/girls but another S10 Platform based truck/suv again ? I...

Blaze One

Oh yes , it is expensive . For a complete Nitro setup , expect to be close to $1000 once the dust has settled . And $1000 is really easy to spend . some kits for onroad 1/8th go for $1000+ with no engine or tires , radio etc... It is more of an adult hobby . unless you want to pay for your kids gear...

Blaze One

there are dozens and dozens of r/c related sites . Probably hundreds .

No I did not do my own paint , but I have a Brand New Mini Cooper body that I am going to paint to exact scale of a real Mini cooper .

Blaze One

I have been in and out of that hobby a few times . Here is what I have owned in the past . TC3 touring car Mini cooper M03 Kyosho Kanai 2 1/8th scale 4wd Nitro Buggy 1/10 scale 2wd stadium truck 1/18th scale HPI rs4 mini 4wd Currently I just have the Mini Cooper , cause they are a pain to find on th...

Blaze One

well , i finished replaceing my front brake pads , I went with a set of Monroe Premiums Ceramic . Everything was lubed and they work much better than my last set . I didn't have a tourqe wrench , so i just tighten them .

Thanks.

Blaze One

sorry for brining up this old topic , but where are these caliper slide pins you speak of ?

Blaze One

Oh I know I won't get close to that amount for my blazer , mines a 99 with 170,000kms on it LS trim -- Last summer I was offered $8000 from a Chrysler Dealership in Langley , and that was as a trade in on a 98 dodge ram 1500 ( $14000 sticker ) . I was just gonna try my luck at other dealerships , I ...

Blaze One

Do you mind telling me which dealership gave you that good of a price for your crew , you can pm me if ya want . I just wanna see how much they would give me for my blazer .

Blaze One

why would he need tow hook spacers if he in not doing a BL ? or did i miss something ?

Blaze One

I am a little confused as to what were talking about here But it is my understanding that the IFS lift kits out there basically drop the suspension components to a new mounting location , as stated already above. But the idea of a coil spring front IFS 4x4 is a good idea if it creates less weak poin...

Blaze One

well atleast you don't regret the trade , was it a straight -truck for truck- trade , or did you use the crew as a "trade in" . I only ask because i am looking for a trade for my blazer. Or i may lower it 4" or maybe trade it in for a VW TDI ..... Holy am I undecided or what ! . On another note , wh...

Blaze One

wow , that surprised me .

I am also a bit more suprised that you stayed with the S10 based platform .
I won't buy another , but that's just me and my bad luck .

Pics ?

Blaze One

good call , I don't want to be stranded in the middle of "nowhere Alberta" 50miles away from the nearest town. I check out costco tomorow . I just keep the mini inverter for ocasional uploading of my pics while on the road . Now I am off to investagate one of those laptop mounts I have seen on the f...

Blaze One

Are you talking about times the truck was not running ? or while driving ?

Blaze One

I plan to use my laptop for a car theater while on vacation next week . I found a 175w inverter in my storage room ( was going to buy a more heavy duty model , but funds are lacking) , and it powers the laptop just fine. But.. Now i need to figure out how long my trucks battery will last before it i...

Blaze One

Alright , I finally have the Air Box Mod DONE ! . whoo hoo , it only took me 1yr after finding out about it to get it done . I used a dremel cut off wheel , worked well . Then I went and smoothed out the edges where i cut with a sanding drum attachment . I have not taken it out for a drive since , b...

Blaze One

thanks , i have found the bolt over by the fuse box , but i cant seem to get those 2 rubber gromet looking things off the front of the box .

Blaze One

I must be an idiot , I am trying to do the stock air box mod before i leave on a 3200km road trip . I need as many fuel saving mods done as possible . But I cant find how the box is mounted , I tried searching ,but didn't find a pic of what I am supposed to do to get the box out , I know what to do ...

Blaze One

I was just going to mention that the lack of insulation may cause paint damage , then read a link from above to find out that it doesn't matter .
So never mind then .

BTW , very clean engine bay you have there F9K9

Blaze One

LOL , I like the last pic .

What paint and process are you guys using to black out the grill on you CC's ?
I would like to Black out the bumper and grill and headlight housing on my blazer .

Blaze One

What kind of ground clearance do you have now that you are running a 33" tire ?
Ie: Fr/Rr Diffs , Lowest frame and skid plates

Blaze One

Moved to NOS since the crew cabs did not have a 8.5" diff-HJ I have notice that a few NON ZR2 S10 based 4x4 AND 2wd trucks/suv's have the 8.5" rear diff. Instead of the "regular" 7.65" diff . Is there anyway to tell which one is there , just by the outside cover ? I guess you could compare it to a ...

Blaze One

crew cab sonoma wrote:sorry to bring this up again, i just read it. but regarding the dome overinde button, but pressing it 3-4 times, (until you hear the chime once)
it is able to turn off both DRL`s AND/OR AHL`s, until the next ignition cycle...

That's interesting

Blaze One

I agree , that for a daily driver , a NON selectable locker is a bad idea . But if you don't have the AutoTRAc 4wd system , than I don't think a locker would cause the 3wd problem . But that is for another thread . I am pretty sure that muslhed is still running the Aluminum diff . I was reading a th...

Blaze One

Ever considered installing a LocRight Locker in the front end . I dunno if it would help you out in that situation . But Muslhed on TXZR2.com has had good results , even with the weak front end

Blaze One

nice car , what kinda of HP/Tq numbers does that put out? FWD or rwD ?

Blaze One

I like to use Meguiars 3 step process , Paint cleaner , polish , then gold class wax . I use a black turtle wax for the hood of my blazer , only becuase there are so many rock chips and scratches , the black color wax fills them in temporaraly . On the tires I use a Simoniz Midnight Tire Gel On the ...

Blaze One

I hope you kept the original equipment ! , and that it can be returned to stock if you want to . Trust me , one day you will want it in its original form .
Nice truck though , were are the burnout pics .?

Blaze One

I was checking my fluids today . I noticed something really scary . in my coolant tank , the color is not the normal green I am used to seeing , it was much darker , with a type of "oil slick" looking substance floating on the top . Not lots , but you could see it reflect in the sun light . I just h...

Blaze One

Alrighty , checked the PCV valve , it rattles and I sprayed it out with some carb cleaner , also double checked the throttle body blades for carbon build up . And there was lots . I sprayed it out as good I could , but some would not come off the walls of the opening. Maybe time to try that Seafoam ...

Blaze One

I try to keep the RPMs below 2000 when acelerating too .
I still seem to only get about 186 miles to a tank , with about 4 gallons left in the tank when I go to refill .
I just had a tune up , but I don' think stuff like the PCV valve has been looked at , where is it ?

Blaze One

I have been looking around trying to find all the little "tricks" , mods and/or adjustments to get the best fuel economy out of the 4.3 V6. There were a few threads scattered through out the web , each with some good and bad ideas . I thought that it may be a good idea ( with rising fuel prices ) th...

Blaze One

that is true , the 4.3 v6 is not a effecient engine at all . It has the displacment close to some V8's and not the power . i don't know much about the nissan/toyota v6's but generally they will be a better engine . Not to say that the GM 4.3V6 is Bad , but it could be better , I agree . But it could...

Blaze One

Oh I agree it could be better too . Would be nice if it was easier to work on , got better mpg . But it is a time tested success . Has been used for many many years with a relatively good reputation . It is basically a Small Block Chevy V8 with 2 less cylinders . The internals are strong too . many ...

Blaze One

Although the diesel would be great , I must say that the 4.3 v6 is a pretty good engine too . A little bit bad on gas , but tough .
Now if only the front end/transfer case was as reliable.

Imagine if there was a SFA S10 in production overseas ! then we would be really pissed off .

Blaze One

Every time someone posts up a thread about the Izuzu/s10 from overseas , I just get really mad a GM for not making that version available to the NA market .
I wonder how much a diesel engine swap would cost ?
Seems it fits nicely in the engine bay .
I like that front end alot too .

Blaze One

I want that

Blaze One

aw man , i just see red x's .

Blaze One

Is it just me or do we all feel nervous and anticipatory for the results of the mounting of these tires ? Even though I think that the 33x9.5 tire has it's advantages over a 10.5 , ( when concerning our front ends) I do have to say the 10.5's do look better . Maybe with the added stress of a wider t...

Blaze One

Oh it was 99 .

I hope that it is up to "par" with Fords interiors , they are very very nice . And that they didn't go on the basis that the Canyon/Colorado interiors are "nice" .

Blaze One

not bad looking , needs larger tires I think though , nothin like huge 35's , but a bigger oem tire to fill the wheel well gaps
And put the HD Duramax hood on it too .
I hope the interior is well updated , they have had the same basic interior since 1995 I think .
Can't wait to see more .

Blaze One

WOW , you blazer just gets better and better .

Jigg: thanks for the info .

Blaze One

well hopefully the person making the bumpers will have a contact number or site OUTSIDE of ZR2USA.com . Sorry But The Person Who Will Be Making These Bumpers Is The Owner/Founder Of zr2USA.com. :( So am I correct to assume that they will not be offered to purchase by anyone other than a ZR2 owner ?...

Blaze One

Thanks , Pictures would be great . I am just guessing , but the Fuel Pump Module is in the tank correct ?

Blaze One

Oh I know , it is a #1 priority to get it replaced before it leaves me stranded .
Just don't have the $$ right now .

Blaze One

Well , I didn't do anything , and the damn truck is running just as good as it ever did .
Still a little rough at idle every so often , and a squeek in the one of the Accessorie drive belt wheels .
But atleast it is running .
I am going to give it a SeaFoam treatment on Monday .

S-10CREWCAB.NET

Search found 405 matches

Re: Rythmic stumble during idle and acceleration,is that a m

Re: Rythmic stumble during idle and acceleration,is that a m

Re: Rythmic stumble during idle and acceleration,is that a m

Re: Rythmic stumble during idle and acceleration,is that a m

Re: Rythmic stumble during idle and acceleration,is that a m

Rythmic stumble during idle and acceleration,is that a miss?

Re: READERS RIDES: Post a picture of your truck

Re: Coolant level always low in overflow tank

Re: Coolant level always low in overflow tank

Re: Coolant level always low in overflow tank

Re: Coolant level always low in overflow tank

Re: Coolant level always low in overflow tank

Re: Coolant level always low in overflow tank

Re: Coolant level always low in overflow tank

Re: Coolant level always low in overflow tank

Re: Coolant level always low in overflow tank

Re: Coolant level always low in overflow tank

Re: Coolant level always low in overflow tank

Re: Coolant level always low in overflow tank

Re: Coolant level always low in overflow tank

Re: Coolant level always low in overflow tank

Coolant level always low in overflow tank

Re: How can I tell if 4x4 is engauged ?

Re: How can I tell if 4x4 is engauged ?

Re: How can I tell if 4x4 is engauged ?

How can I tell if 4x4 is engauged ?

Back Again !!!

Would you you do it again ?Buy a S10 platform based TruckSUV

Battery discharge time ?.... using laptop for video play

I can't figure out how to remove the airbox !

Is there any way to tell if your Rear Diff is the rare 8.5&a

Dark coolant !

Ultimate Fuel Efficiency Thread