Search found 80 matches
- Tue Aug 09, 2005 7:37 pm
- Forum: Stock Crew Cab
- Topic: AC Delco Batteries. BAD?
- Replies: 13
- Views: 1269
I think you are 100% right. When i jump start my truck from my other car, the voltage meter in the dash shows the needle near 13 volts, whereas the moment i take off the jumper cables the truck dies there and then. It sounds that the alternator is going bad. Thanks for the feedback and i will keep y...
- Tue Aug 09, 2005 9:54 am
- Forum: Stock Crew Cab
- Topic: AC Delco Batteries. BAD?
- Replies: 13
- Views: 1269
Blazer 1996 model, V-6 vortec engine,Battery?
Hi Guys Today my subject truck battery died. I had replaced a new battery (AC Delco) a month back. So now i have tried to jump start the truck with my another car. Well the truck takes a start, but when i remove the battery cables and put the truck in D Drive, the engine dies again. Well after that ...
- Tue Aug 09, 2005 9:39 am
- Forum: Stock Crew Cab
- Topic: Qamar's glove box
- Replies: 32
- Views: 3174
- Mon Jul 04, 2005 2:50 am
- Forum: Stock Crew Cab
- Topic: Qamar's glove box
- Replies: 32
- Views: 3174
You are right in saying this, The Blazer has the glove box right about where the other models have the airbags.
Well I am trying and will reach at some conclusion. What ever i will get will post the same so that others could also get the benefit.
I really want to thanks all of you for your feedback.
Well I am trying and will reach at some conclusion. What ever i will get will post the same so that others could also get the benefit.
I really want to thanks all of you for your feedback.
- Sun Jul 03, 2005 2:28 pm
- Forum: Stock Crew Cab
- Topic: Qamar's glove box
- Replies: 32
- Views: 3174
I have opened all the screws. There is no connection of glove box interior with that. After removing all the screws, one can feel that the glove box cannot be removed at any cost. I have tried also to have an acess through the relays, as are seen in the pics, but that effort was also fruitless. It a...
- Sun Jul 03, 2005 2:01 pm
- Forum: Stock Crew Cab
- Topic: Qamar's glove box
- Replies: 32
- Views: 3174
- Sun Jul 03, 2005 1:48 pm
- Forum: Stock Crew Cab
- Topic: Qamar's glove box
- Replies: 32
- Views: 3174
- Sun Jul 03, 2005 1:27 pm
- Forum: Stock Crew Cab
- Topic: Qamar's glove box
- Replies: 32
- Views: 3174
- Sun Jul 03, 2005 12:54 pm
- Forum: Stock Crew Cab
- Topic: Qamar's glove box
- Replies: 32
- Views: 3174
- Fri Jul 01, 2005 10:12 am
- Forum: Stock Crew Cab
- Topic: Qamar's glove box
- Replies: 32
- Views: 3174
- Fri Jul 01, 2005 3:06 am
- Forum: Stock Crew Cab
- Topic: Qamar's glove box
- Replies: 32
- Views: 3174
Dear Malkivin You mind in guiding me as how did you opened the glove box of your S-10 1995. I have 1996 model S-10, and can't open the glove box. Have tried twice but could not get to the upper photograph given in this tread. Will be greatful if you could guide me step by step. Thanking you in advance
- Thu Jun 23, 2005 4:22 am
- Forum: Stock Electrical / Audio / Lighting
- Topic: S-10, v-6, vortec engine, alternator, 1996 model
- Replies: 4
- Views: 788
- Thu Jun 23, 2005 4:15 am
- Forum: Stock Crew Cab
- Topic: Blazer 1996 model, V-6 vortec,automatic, Ball under hood
- Replies: 2
- Views: 506
- Wed Jun 22, 2005 1:58 pm
- Forum: Stock Electrical / Audio / Lighting
- Topic: S-10, v-6, vortec engine, alternator, 1996 model
- Replies: 4
- Views: 788
- Wed Jun 22, 2005 1:18 pm
- Forum: Stock Crew Cab
- Topic: Blazer 1996 model, V-6 vortec,automatic, Ball under hood
- Replies: 2
- Views: 506
Blazer 1996 model, V-6 vortec,automatic, Ball under hood
Hi Guys
Under the bonnet on the driver side there is a plastic ball mounted which has a main vacum line. The vacum line appears to be torn away with time. I am going to change it by the new one tomrow. Anyone who could tell me as what is the function this vacum pipe plays on?
Thanks
Under the bonnet on the driver side there is a plastic ball mounted which has a main vacum line. The vacum line appears to be torn away with time. I am going to change it by the new one tomrow. Anyone who could tell me as what is the function this vacum pipe plays on?
Thanks
- Wed Jun 22, 2005 1:15 pm
- Forum: Stock Electrical / Audio / Lighting
- Topic: S-10, v-6, vortec engine, alternator, 1996 model
- Replies: 4
- Views: 788
S-10, v-6, vortec engine, alternator, 1996 model
The alternator of my subject truck is passing 12.2 Volts with AC/ Head lights on, witout that it goes to 12.3 volts. Anyone who could tell that is it fine or the alternator is dying slowly. My observation is that the dash lights during night time now appear to be little bit low, and the voltage gaug...
- Sat Jun 18, 2005 2:00 pm
- Forum: Stock Crew Cab
- Topic: Blazer 1996 Model, Votec engine, automatic, raditor
- Replies: 6
- Views: 835
- Sat Jun 18, 2005 1:09 pm
- Forum: Stock Crew Cab
- Topic: Blazer 1996 Model, Votec engine, automatic, raditor
- Replies: 6
- Views: 835
I wanted to thank you for the information you have provided. have changed the coolant as per your instructions. The truck is running fine. The only problem which i could feel today that my charging gauge was showing a readining in between its first mark and 14. It always use to be in the range of 13...
- Wed Jun 15, 2005 11:41 am
- Forum: Stock Crew Cab
- Topic: Blazer 1996 Model, Votec engine, automatic, raditor
- Replies: 6
- Views: 835
- Tue Jun 14, 2005 11:37 pm
- Forum: Stock Crew Cab
- Topic: Blazer 1996 Model, Votec engine, automatic, raditor
- Replies: 6
- Views: 835
Blazer 1996 Model, Votec engine, automatic, raditor
Hi Guys I need to flush out the coolant from the system. For that shall be grateful if someone can tell me as how to drain the coolant from the raditor from its plug which is on the bottom passenger side. I am sure that thats the small nob which ought to be opened. I dont want to break it as i have ...
- Fri Jun 10, 2005 9:20 pm
- Forum: Stock Mechanical / Drivetrain
- Topic: Revised transfercase switch *READ THIS THREAD!
- Replies: 110
- Views: 48879
- Thu Jun 02, 2005 2:58 am
- Forum: Stock Crew Cab
- Topic: Blazer 1996 model, Driver side mirror broken
- Replies: 3
- Views: 557
Blazer 1996 model, Driver side mirror broken
Hi Guys
Someone have broken the driver side rear view mirror. To change it i need to open the driver side panel uphostery. can anyone give information with pics as how to open and excess the mirror.
Thanks in advance
Someone have broken the driver side rear view mirror. To change it i need to open the driver side panel uphostery. can anyone give information with pics as how to open and excess the mirror.
Thanks in advance
- Fri May 20, 2005 3:38 am
- Forum: Stock Electrical / Audio / Lighting
- Topic: Blazer 1996 model, V-6 vortec engine, tail light bulb change
- Replies: 3
- Views: 707
- Wed May 18, 2005 2:11 pm
- Forum: Stock Electrical / Audio / Lighting
- Topic: Blazer 1996 model, V-6 vortec engine, tail light bulb change
- Replies: 3
- Views: 707
Blazer 1996 model, V-6 vortec engine, tail light bulb change
I need to change the right side rear brake light bulb. Any idea as how to open up the brake light compartment to change the bulb.
Thanking in advance
Thanking in advance
- Fri May 13, 2005 7:40 pm
- Forum: Stock Electrical / Audio / Lighting
- Topic: Blazer 1996 model, V-6 vortec engine, Dying Battery
- Replies: 4
- Views: 719
- Fri May 13, 2005 4:40 am
- Forum: Stock Electrical / Audio / Lighting
- Topic: Blazer 1996 model, V-6 vortec engine, Dying Battery
- Replies: 4
- Views: 719
Blazer 1996 model, V-6 vortec engine, Dying Battery
My subject truck for the last two days is not starting up. Meaning when i crank the engine, it appears the battery is almost dead. The question is that the colour shown in the AC Delco battery is Green. It is an indicator that the battery is fully charged. I had also cleaned and tightened up both th...
- Sun May 01, 2005 7:52 pm
- Forum: Stock Crew Cab
- Topic: Blazer 1996 model, v-6 vortec engine, EGR valve location
- Replies: 2
- Views: 476
- Sat Apr 30, 2005 10:44 pm
- Forum: Stock Crew Cab
- Topic: Blazer 1996 model, v-6 vortec engine, EGR valve location
- Replies: 2
- Views: 476
Blazer 1996 model, v-6 vortec engine, EGR valve location
Hi
Can anyone help me with pics and location of the EGR valve in my subject truck.
Thanking in advance
Can anyone help me with pics and location of the EGR valve in my subject truck.
Thanking in advance
- Fri Apr 22, 2005 6:34 am
- Forum: Stock Crew Cab
- Topic: Qamar's glove box
- Replies: 32
- Views: 3174
- Fri Apr 22, 2005 5:54 am
- Forum: Stock Crew Cab
- Topic: Qamar's glove box
- Replies: 32
- Views: 3174
Likewise we were guessing that 1996 Blazer might be different then the 2001 and 2002 models. So your pic clearly tells me that in my 1996 Blazer there is no spring or wire sort of thing through which we could open the glove box. I am trying to get the information, even if i had to go to GM center i ...
- Fri Apr 22, 2005 3:05 am
- Forum: Stock Crew Cab
- Topic: Qamar's glove box
- Replies: 32
- Views: 3174
No problem. Likewise i told you earlier that you gave your best shot. Thanking you once again for your help. I am trying to search around through some good search engines. Maybe i get some information. If yes will post the same so that others can also get the benefit as and when they need it.
Regards
Regards
- Fri Apr 22, 2005 2:55 am
- Forum: Stock Crew Cab
- Topic: Qamar's glove box
- Replies: 32
- Views: 3174
- Fri Apr 22, 2005 2:01 am
- Forum: Stock Crew Cab
- Topic: Qamar's glove box
- Replies: 32
- Views: 3174
- Thu Apr 21, 2005 1:14 pm
- Forum: Stock Crew Cab
- Topic: Hot Feet Fix
- Replies: 112
- Views: 86474
- Thu Apr 21, 2005 1:00 pm
- Forum: Stock Crew Cab
- Topic: Hot Feet Fix
- Replies: 112
- Views: 86474
- Thu Apr 21, 2005 12:24 pm
- Forum: Stock Crew Cab
- Topic: Hot Feet Fix
- Replies: 112
- Views: 86474
- Thu Apr 21, 2005 6:57 am
- Forum: Stock Crew Cab
- Topic: Hot Feet Fix
- Replies: 112
- Views: 86474
Blazer 1996 model, V-6 vortec engine, Hot feet issue
Today i had tried to remove the glove box for fixing the issue of hot feet in my truck. Had removed all the front screws of the cofront door of the glove box. Even then the inside plastic cover of the glove box never came out . So fixing the nut or plastic cap in the concerened vacum pipe is still a...
- Thu Apr 21, 2005 5:02 am
- Forum: Stock Crew Cab
- Topic: Blazer 1996 model, V-6 vortec, automatic, AC problem
- Replies: 1
- Views: 364
Well i wanted to inform you that i had opened up the engine compartment and had pressed a switch on the top of the AC compressor. It clicked and settled properly on its place. After that there is no defect. Now whenever i switch on the compressor it gets engaged. Maybe during service that switch got...
- Sun Apr 17, 2005 9:35 pm
- Forum: Stock Electrical / Audio / Lighting
- Topic: power window
- Replies: 13
- Views: 1906
Hi This happened with my truck also. I have recently purchased 1996 model, v-6 vortec, automatic. I one my first day had put down the D/S window glass, but it never went back. All i had done was that I had sprayed W-D 40 around the concerened switch on the driver side which keeps the window rolling ...
- Sun Apr 17, 2005 9:19 pm
- Forum: Stock Crew Cab
- Topic: Blazer 1996 model, V-6 vortec, automatic, AC problem
- Replies: 1
- Views: 364
Blazer 1996 model, V-6 vortec, automatic, AC problem
Hi Guys For the last two or three days when ever i switch on my subject truck Aircondationer (MAX AC or AC) the compressor is not engaged there and then. Yes when i run the truck for 4 or 5 minutes with the AC switch on, the compressor gets engaged after that and then later on there is no problem du...
- Tue Apr 12, 2005 9:24 pm
- Forum: Stock Crew Cab
- Topic: Blazer 1996 model, V-6 vortec engine, spark plugs
- Replies: 2
- Views: 428
- Tue Apr 12, 2005 8:15 pm
- Forum: Stock Crew Cab
- Topic: Blazer 1996 model, V-6 vortec engine, spark plugs
- Replies: 2
- Views: 428
Blazer 1996 model, V-6 vortec engine, spark plugs
My subject truck has done 86000 Km. Todate i have not changed the spark plugs. I am the second owner, and i am sure that the previous owner have not changed them. There is no missing/stalling/late starting etc. The fuel average is very good. If i have crossed the recommended period than what kind of...
- Fri Apr 08, 2005 8:12 pm
- Forum: Stock Crew Cab
- Topic: Dex-cool recall?
- Replies: 10
- Views: 1427
- Tue Apr 05, 2005 8:00 pm
- Forum: Stock Crew Cab
- Topic: Blazer 1996 model, Passenger side rear last glass broken
- Replies: 3
- Views: 498
- Tue Apr 05, 2005 2:02 am
- Forum: Stock Crew Cab
- Topic: Blazer 1996 model, Passenger side rear last glass broken
- Replies: 3
- Views: 498
Well the new glass is very expensive. I have gone to the scab market. Have found the same glass in a good condation. Have seen that it will be attached with the silicon. Question is that the old glass is still with the old silcon on till. Will it stick down with the surface of the truck or we have t...
- Mon Apr 04, 2005 9:53 pm
- Forum: Stock Crew Cab
- Topic: Blazer 1996 model, Passenger side rear last glass broken
- Replies: 3
- Views: 498
Blazer 1996 model, Passenger side rear last glass broken
Hi Guys Well its a bad news. Someone broke my subject truck passenger side glass. One which is on the extreme right hand side glass at the back side. I know the agency will fix it right. Wanted to get some information. Is it really difficult to get it back on its place. Some glues are involved in it...
- Sat Apr 02, 2005 9:04 pm
- Forum: Stock Electrical / Audio / Lighting
- Topic: Sunshade lights not working *solved*
- Replies: 4
- Views: 886
Excellent feedback. that really worked out. I had just removed the driver side bulbs and had used them on the passenger side. They are working fine. You were right in saying that Ladies do have the tendency of make ups and other things to do while they are on the passenger side. I hardly remember th...
- Fri Apr 01, 2005 8:11 pm
- Forum: Stock Crew Cab
- Topic: Blazer 1996 model, V-6 vortec engine, coolant smell
- Replies: 7
- Views: 780
- Thu Mar 31, 2005 1:31 am
- Forum: Stock Electrical / Audio / Lighting
- Topic: Sunshade lights not working *solved*
- Replies: 4
- Views: 886
- Thu Mar 31, 2005 1:29 am
- Forum: Stock Crew Cab
- Topic: Blazer 1996 model, V-6 vortec engine, coolant smell
- Replies: 7
- Views: 780
I appreciate the tip given by you that if the heater pipes are disconnected for good then there is no chance to cool down the engine if it gets hot due to any reason. So now i am going to leave the system as it is, but will keep a close look at the drop of coolant or any smell coming out in the cabi...
- Wed Mar 30, 2005 12:11 am
- Forum: Stock Crew Cab
- Topic: Blazer 1996 model, V-6 vortec engine, coolant smell
- Replies: 7
- Views: 780
Blazer 1996 model, coolant smell
i dont smell the coolant anymore inside the cabin, every since had washed the engine compartment thoroughly. Maybe it spilled over in the engine compartment during the flushing of the old coolant. Now if i want to disconnect the heater by taking off the two rubber pipes going from the engine compart...
- Tue Mar 29, 2005 11:40 pm
- Forum: Stock Electrical / Audio / Lighting
- Topic: Sunshade lights not working *solved*
- Replies: 4
- Views: 886
Sunshade lights not working *solved*
My subject truck passenger side sunshade mirror light (Bulbs) is not working. Anyone who have an idea as what could be the fault and how to get it fixed.
Thanking in advance
Edited title-HJ
Thanking in advance
Edited title-HJ
- Fri Mar 25, 2005 7:31 pm
- Forum: Stock Crew Cab
- Topic: Blazer 1996 model, V-6 vortec engine, coolant smell
- Replies: 7
- Views: 780
Blazer 1996 Model, V-6 vortec, Coolant smell
I think you are right. I never washed out the engine compartment with fresh water after changing the old coolant.
Secondly will also keep an eye on the passenger side carpet wetness.
Will update accordingly in a week's time.
Secondly will also keep an eye on the passenger side carpet wetness.
Will update accordingly in a week's time.
- Fri Mar 25, 2005 5:37 am
- Forum: Stock Crew Cab
- Topic: Blazer 1996 model, V-6 vortec engine, coolant smell
- Replies: 7
- Views: 780
Blazer 1996 model, V-6 vortec engine, coolant smell
Yesterday while driving on hig speed on the main higway i could feel the coolant smell insude the cabin. Had checked the coolant level in the morning. It had also not decreased. What could be the reson for this smell. It was not constant in the cabin. My observation is that when ever i had excellera...
- Fri Mar 25, 2005 5:31 am
- Forum: Stock Mechanical / Drivetrain
- Topic: Blazer 1996 Model, V-6 vortec engine,TWO D signs in the dash
- Replies: 7
- Views: 681
Blazer 1996 model, V-6 vortec engine, Manual
I want to thanks Henry for the user manual. It was quite informative for a begginer like me.
Regards
Regards
- Wed Mar 23, 2005 12:07 pm
- Forum: Stock Crew Cab
- Topic: Blazer 1996 Model, V-6 vortec , Rotation of tires
- Replies: 2
- Views: 459
Blazer 1996 model, V-6 vortec engine,
Thanks for the information. I have also dowloaded the user manual from your given thread.
Thanking you once again Henry.
Thanking you once again Henry.
- Wed Mar 23, 2005 11:58 am
- Forum: Stock Crew Cab
- Topic: Blazer 1996 Model, V-6 vortec , PCV valve
- Replies: 2
- Views: 473
Blazer 1996 model, V-6 vortec engine, PCV valve
Thanks for the information. Shall be greatful if a pic can be shown on the engine.
Regards
Regards
- Tue Mar 22, 2005 2:29 am
- Forum: Stock Crew Cab
- Topic: Blazer 1996 Model, V-6 vortec , Rotation of tires
- Replies: 2
- Views: 459
Blazer 1996 Model, V-6 vortec , Rotation of tires
Anyone help in telling me as what is the exact way of rotating the tires after 15000 miles. I mean what is the sequence. The front tire should come at the back? or it is in differnt way
Thanks in advance
Thanks in advance
- Tue Mar 22, 2005 2:20 am
- Forum: Stock Crew Cab
- Topic: Blazer 1996 Model, V-6 vortec , PCV valve
- Replies: 2
- Views: 473
Blazer 1996 Model, V-6 vortec , PCV valve
Anyone who could help me in explaining as what is the function of the PSV valve in my truck. Secondly shall be greatful if the exact location could be identified with pics, as i may need it to clean it up.
Thanks in advance
Thanks in advance
- Mon Mar 21, 2005 1:59 am
- Forum: Stock Mechanical / Drivetrain
- Topic: Blazer 1996 Model, V-6 vortec engine,TWO D signs in the dash
- Replies: 7
- Views: 681
Blazer 1996 Model, V-6 vortec engine,TWO D signs in the dash
Thanks for the information.
Regards
Regards
- Sun Mar 20, 2005 10:25 pm
- Forum: Stock Mechanical / Drivetrain
- Topic: Blazer 1996 Model, V-6 vortec engine,TWO D signs in the dash
- Replies: 7
- Views: 681
Blazer 1996 Model, V-6 vortec engine,TWO D signs in the dash
I hope you want laugh. Its a very simple question which i am going to ask, as i have recently purchased the subject truck with no manual with it. Well i can see two "D" signs in the dash board, while we move the shifter. The question is what are they for? i usuall drive my truck in 2 wheel drive wit...
- Sun Mar 20, 2005 9:59 pm
- Forum: Stock Mechanical / Drivetrain
- Topic: truck won't start, has anyone run into this problem?
- Replies: 18
- Views: 1913
Blazer 1996 Model, V-6 vortec engine,Rotor and cap
Thanks for the prompt and professional reply.
Regards
Qamar
Regards
Qamar
- Sun Mar 20, 2005 8:50 pm
- Forum: Stock Mechanical / Drivetrain
- Topic: truck won't start, has anyone run into this problem?
- Replies: 18
- Views: 1913
Blazer 1996 Model, V-6 vortec engine,Rotor and cap
Anyone who could give information with pics regarding the location of the rotor and cap of my above subject truck. I also need to change the spark plugs after 10000 KM.
Thanks in advance
Thanks in advance
- Thu Mar 17, 2005 2:11 am
- Forum: Stock Crew Cab
- Topic: Blazer 1996 Model, V-6 vortec needs Raditor flush
- Replies: 6
- Views: 742
Blazer 1996 model, V-6 vortec, thermostate location
Thanks Henry. It was a wonderful information. I have followed your instructions and have flushed the raditor coolant. The Dexcool was like a Dead cool. Now i have replaced it with a Green coolant. I have the plan to get it flushed out on a yearly basis. Its so chap and easy way to do it. Thanking yo...
- Wed Mar 16, 2005 7:24 am
- Forum: Stock Crew Cab
- Topic: Blazer 1996 Model, V-6 vortec engine, automatic, done 84000
- Replies: 4
- Views: 566
Blazer 1996 model, V-6 vortec, front greasing points
I want to say thanks to Mr.Henry. With his guidance i have greased all the 11 pionts of my subject truck. It was a good experience. Bit difficult but got through. I am sure things are going to easy for the second time.
Regards
Regards
- Wed Mar 16, 2005 7:20 am
- Forum: Stock Crew Cab
- Topic: Blazer 1996 Model, V-6 vortec needs Raditor flush
- Replies: 6
- Views: 742
Blazer 1996 model, V-6 vortec, Raditor Flush
I need to change my coolant. For that i have removed the front shield. Could not find the raditor drain nut. Can anyone help out where it is located. Any help with the raditor drain nut pics will be highly appreciated.
Regards
Regards
- Tue Mar 15, 2005 7:55 pm
- Forum: Stock Crew Cab
- Topic: Blazer 1996 Model, V-6 vortec ,fuel filter location
- Replies: 9
- Views: 832
Blazer 1996 Model, V-6 vortec
You can well imagine that if Blazer is to me marketed in Japanese market then YOU have to have some solid features in it. I mean to say that it should be better than their vehicles. Everybody knows that TOYOTA and other Japanese cars are one of the hottest selling cars in the world, so to break thei...
- Tue Mar 15, 2005 2:08 am
- Forum: Stock Crew Cab
- Topic: Blazer 1996 Model, V-6 vortec ,fuel filter location
- Replies: 9
- Views: 832
Blazer 1996 Model, V-6 vortec engine, automatic, done 84000
Well apart from that United Arab Emirates is a place of 4*4. People love to buy them as they take them to sand and have fun over there. Well i am not in favour of that. I drive it like a saloon car. the reason of buying this truck was that my family size was getting bigger. i do have BMW 1995 model,...
- Tue Mar 15, 2005 12:37 am
- Forum: Stock Crew Cab
- Topic: Blazer 1996 Model, V-6 vortec ,fuel filter location
- Replies: 9
- Views: 832
Blazer 1996 Model, V-6 vortec needs Raditor flush
I am from United Arab Emirates. The Truck is from Japan. It has recently been imported from Japan to united Arab Emirates. We have so many of these trucks plying on roads over here, and they are going fine. The Japanese maintained their vechicles like anything. It is always in mint condations. Maybe...
- Mon Mar 14, 2005 9:05 pm
- Forum: Stock Crew Cab
- Topic: Blazer 1996 Model, V-6 vortec ,fuel filter location
- Replies: 9
- Views: 832
Blazer 1996 Model, V-6 vortec ,fuel filter location
Thanks for the information.
Regards
Regards
- Mon Mar 14, 2005 8:04 pm
- Forum: Stock Crew Cab
- Topic: Dex-cool recall?
- Replies: 10
- Views: 1427
Blazer 1996 Model, V-6 vortec needs Raditor flush
I am left with no option then to change from Dexcool to any Green coolant. Lets see and try our luck. Actually the truck have never over heated todate. Maybe everything goes fine after flushing the raditor and having Green product in it.
Regards
Regards
- Sun Mar 13, 2005 11:24 pm
- Forum: Stock Crew Cab
- Topic: Blazer 1996 Model, V-6 vortec ,fuel filter location
- Replies: 9
- Views: 832
Blazer 1996 Model, V-6 vortec ,fuel filter location
Anyone who can help me out in knowing the fuel filter location in my subject truck. I shall be grateful if the information given is supported by the pics as i am relatively new on this make and model.
Thanking in advance
Thanking in advance
- Sun Mar 13, 2005 11:13 pm
- Forum: Stock Crew Cab
- Topic: Blazer 1996 Model, V-6 vortec needs Raditor flush
- Replies: 6
- Views: 742
Blazer 1996 Model, V-6 vortec needs Raditor flush
So i am going to switch over to green tradational coolant. Will keep an eye on it. Hope this works in the long run as it is doing with you.
Thanks for your feedback and valued information.
Regards
Thanks for your feedback and valued information.
Regards
- Sun Mar 13, 2005 10:50 pm
- Forum: Stock Crew Cab
- Topic: Dex-cool recall?
- Replies: 10
- Views: 1427
Blazer 1996 Model, V-6 vortec needs Raditor flush
I have gone through your comments. Thanks for your feedback. Let me tell you that i have recently purchased this truck which have done 84000 KM. The truck is imported from Japan, and is in a very good shape. Well when i had opened the raditor cap, the Dexcool level had gone down, wherein the resiour...
- Sun Mar 13, 2005 8:37 pm
- Forum: Stock Crew Cab
- Topic: Blazer 1996 Model, V-6 vortec needs Raditor flush
- Replies: 6
- Views: 742
Blazer 1996 Model, V-6 vortec needs Raditor flush
Hi Guys I need to flush out my subject truck raditor. How can i have excess to the raditor drain nut. Do i have to open up the bolts of the plastic protecting plate under the oil filter or there is some other way. (Actually time to change the Coolant). Secondly i wanted to ask should i use the Dex c...