S-10CREWCAB.NET

gocntry

Supercharger - Turbocharger

How About a V8

gocntry

Another thing to consider would be adding two wide "SS" stripes. This could be done in vinyl and added to the tailgate as well. Great Idea :D , I Never Thought Of That, Just Might Be The Idea I Was Looking For. Thanks :thumb: decide to sell your truck Ohhh, You Shouldnt Use Foul Language Like That ...

gocntry

BobbleSmitty wrote: I got the Alpine CDE-9843

Nice Choice, I Just Got The Same One Delivered Today That I Am Putting In My Wife's Ranger.

gocntry

Let us know what kind of shape it arrives in. My box was mutilated, but the hood survived with only a little body work. Got The Hood In Yesterday....Box Was A Little Banged But No Damage To The Hood. I Have To Wait Until Next Wednesday To Get To The Body Shop To Get An Estimate For Paint & Install....

gocntry

HenryJ wrote:Don't you worry about what I am up to , just save your funds and get finances in order so that you are ready when I am

Funds Are Saved......Finances Are In Order......I'm Ready!!....Let Me Know When Your Ready....

gocntry

Got The Diff / Oil Pan Skid.....

Your Right Rusty....The Passenger Side Bolt Was A Pain....

gocntry

I think I still have the three bolts you are looking for. If you and your truck are movable, feel free to stop by and I'll give you a hand. That one bolt can be a real bear if I remember right. PM me if you want and I'll give you directions and/or cell phone number. Hey Rusty, Thanks For The Offer ...

gocntry

Quick Question I Hope One Of You Can Answer For Me... I Am In Process Of Installing The Aluminum Engine Skid Plate, The 2 Brackets That Have To Be Installed It Looks Like 1 Goes Thru The Front Diff Mount (drivers side) And The Other Goes To The Bracket That Goes To The Front Axle (Pass Side), Also T...

gocntry

Forget The Throttlebody Spacers... Here Is A 1" Manifold Spacer...31% More Air...21 More Horsepower...21 More Ft/Lbs Torque....Hmm Who Wants To Be First With This Mod

Wynjammer Manifold Spacer

gocntry

I Talked With Them In Mid January......

Boise Springs Works Thread

gocntry

Here Ya Go

Tom Woods

gocntry

Hey Bubaloo1983... Have You Ever Thought About Making Some Nice Sliders For Our Crewcabs?? Being You Have A Zr-5 You Could Make Some That Bolt On To The Factory Step Bar Mounts Or Weld On's For The Non Zr5 Crews. A Nice Set Like Is On The Mod Page Would Be Cool W/ The Outrigger Steps. Don't Know If ...

gocntry

I tried to tell my wife, "Honey! All the other crew cab owners are doing it!!!!" But for some reason that line didn't work! :lol: She said, "If all the other crew cab owners told you to jump off a bridge, would you do that too?" To which I promptly responded, "NOT AGAIN!" :shock: :lol: Yeah, that o...

gocntry

HenryJ wrote:I won't string you along. If things don't look good in the next 30 days I'll let you know.

gocntry

If you are in a hurry, and want the lift soon Yep I Wanted To Do The Truck This Summer just hope I don't have to wait too long. Sharon might change her mind! Every husband here KNOWS how women can be! Yep Wife Is Talking Hot Tub Not Truck Lift..... :lol: I Think I Am Going To Town And Find The Lady...

gocntry

Rusty wrote:I figure my speed limiter kicks in about 95mph but it's pretty much out of steam by then anyhow.

Does It Help At All If You Hit The "4 HI" Button At 95 MPH??

gocntry

Get your finances in order and save up some money, but I may be pushing for you to go a slightly different direction. This may take a little while before I have the solution all put together, but if it works out there may be a cost effective alternative offering some benefits that SL, TM and BDS ca...

gocntry

just a reminder... Something I forgot when ordering my wheels. They're not neccessarily "as pictured". The center caps and lug nuts DO NOT come with the wheels unless they specifically list them as included. (and stock lug nuts look pretty awful on shiny new black rims) I Found That Out Reading The...

gocntry

I Have The Rockcrawler Series 97 On Order, I Got The 3.75" Backspacing, As Soon As I Get Them I'll Go To Costco & Order The 31 x 10.50 BFG Mud Terrains

4WheelParts Was Doing A July 4 Special 10% Off And Free Shipping.

gocntry

That looks great :thumb: I've been wanting to do mine for a while but have been afraid of getting a weak bind between the paint and already painted on "chrome". Any kind of special surface prep? sanding? Barch, I Used The Exact Krylon Paint You Posted A Picture Of, I Also Sanded The Chrome Pretty G...

gocntry

jeff024 wrote: black the hood /roof and tailgate

I Was Thinking About Making The Cowl On The Hood Black..... I Guess If I Keep Going I'll Look Like A Backwards Skunk.....

gocntry

Sorry Adrenalnjunky........ But I Used Barch's Idea...The Krylon Rattle Can Only In A "Semi-Flat" Black. I Also Blacked Out The Chrome Rings Around The Headlights Too. I Had To Go The Cheap Route Since I'm Gonna Do The Cowl Induction Hood. The After Shot: http://home.comcast.net/~gocntry/CrewCab_Pic...

gocntry

I Am Now HPP3 Programmed...87 Octane Version For Now...That Ebay Delivered Quick.......

gocntry

Hey HenryJ....

Thanks For The Link....

I Got Older Yesterday And My B-Day Funds=Goodmark Hood Purchase

gocntry

Tzdevill wrote:also where is the best place to buy them

I Have The Rancho RS 5000's, They Are Ok But I Wished I Had Done The Bilsteins.

Go To Truckperformance.com Bilsteins Are 60.00 Each W/ Free Shipping right Now.

Bilsteins W/ Free Shipping

gocntry

Rusty wrote:I swear at them, I went on a trail ride last March along with some others from this board. Gocntry still had the stock Goodyear R/T's on his and he had better traction in the snow and mud than I did!

I Remember...You Were Pretty Upset At Your Tires That Day

gocntry

f9k9 wrote:I've got 15x7" wheels, 2" BL, TB crank, daystar shackles, 4.5" BS, 1.25" spacers and 30x9.50" tires. I have trimmed and still have issues.

So I Take It Your Vote Is For The 3.75" Also??

gocntry

Barch97 wrote:You've got a 2" body lift, right?

Nope, No Body Lift. I Am Going To Run These With The 6" SL. Just Starting To Get My Parts Together And Don't Want To Make An Expensive Error.

gocntry

Getting Ready To Order Some Wheels, They Are Gonna Be 15x8" With A 31x10.50 Tire, I Have A Choice Of Backspacing Either 3 3/4" Or 4 1/2" Will One Work Better Than The Other??

gocntry

jeff024 wrote:I see you bought the HPP

Just Waiting For It To Arrive,

Can You Give Me Some Basic Settings For The Shift Points??

gocntry

Man...I Still Feel Small

Here Is A Picture Of My Buddies New Tacoma Next To The Crew, And This Is A 2 Wheel Drive Prerunner Crewcab. Man I Need To "Go Big"

gocntry

jeff024 wrote:heres 1 for the 2003 buy it now is 225 HPPIII BUY IT NOW
and FREE shipping

Cool.....Just E-mailed The Guy To Make Sure It Has Been Reset Then I'll Pick It Up If Nobody Beats Me Too It.

gocntry

HenryJ wrote: think it is kind of neat. If you're no longer interested , I might give it a shot.

Hey HenryJ If Your Interested Go For It....I Think It's Cool I Would Just Like To Have The Non Metric Version (If That Exists). Here's The Samuri Version But It's Expensive

Samauri Version

gocntry

I Took A Better Look At This And Realized That Being It's From Japan The Altimeter Is In Meters Not Feet....So I'm Still Looking For The American Version

Kf6kmx wrote:The Samauri has a very similar unit in it..

There Should Be A US Version From One Of These.

gocntry

I'm On The Lookout For An HPP3 Now...Anybody Got Any Leads On A Great Deal??.
I Found A New One For $315.00 Shipped So Far....But I Know There's A Better Deal Somewhere

gocntry

What Do You Guys Think??

Looks Like A Mechanical Unit, Think This Will Work In The Crew, Or Am I Wasting My time??

Look Here

gocntry

Split topic from the classifieds to save the information-HJ

HJ,

Isn't That What You Have On Your Truck?? The Design 1. If So How Is The Quality & Fit??

gocntry

Here Ya Go.....

Flares For Sale

gocntry

adrenalnjunky wrote:if you replace that grill off your truck - I wanna work something out for your stocker -- mine got damaged and the epoxy isn't holding up

Ok I'll Let Ya Know

gocntry

If you use stock rims (I did), you will need spacers up front and back to avoid frame rub. I used 1.25" in front and 2.25" in rear. Good luck! I Was Gonna Get New Rims That Have A 4.5" BackSpacing And Run My 1.25" Spacers In The Rear So That Should Be About The Same. It'll do great though if you do...

gocntry

My Crew Is All Black & White Except For The Front Grill Center Bar. Can I Buy A Different Piece That Is black? Or Is There A Good Way To Black Out The Chromed Plastic? Any Suggestions......

gocntry

Thanks For All The Opinions.....Looks Like My Best Bet Is The 31x10.50/15's. Goal Is To Be Lifted By The End Of July / Beginning Of August.....As Long As The Game Plan Goes Smoothly...And The Wife Doesn't Get Too

....................

gocntry

It weighs 5800 lbs. I had exactly 2900 lbs on the front axle and 2900 lbs on the rear Ok Sticker On My Truck Says GVWR 5150 W/ Front @ 2800 & Rear @ 2700 So... Does That Make You 650 lbs Over? 5800 - 5150 Or Does That Make You 300 lbs Over? 2900 + 2900=5800 - 2800 + 2700=5500 OR Am I Still Lost And...

gocntry

adrenalnjunky wrote:Higher-res copy of the strip

Thanks

gocntry

This Looks Like A Trip To The Dealer....

Trip To The Dealer

gocntry

My Game Plan For The Crew Is A 6" Superlift Suspension Lift, I Do NOT Want To Do A Body Lift With It. I Am Going To Do The Realift Torsion Bar Relocators With It. As Far As Tire Size Goes I Have The 3.73 Gears And Was Thinking 265/75R16 (32 x 10.50) And Going With The 4.10 Gears BUT Is An Xtra Inch ...

gocntry

Have you tried them? Yep...Been Running That Accel Kit On The 4.3 In My Astro For About 3 Years Now And I Replaced The Factory Coil With The Accel Coil Also. Don't Know If There Was A Big Performance Increase But It Runs Smooth And I Havent Had Any Problems So Far.....And If You Think Changing Plug...

gocntry

Jim wrote:I put the truck up on jack stands

I Was Too Lazy To Do That

I Just Crawled Under Mine

gocntry

HenryJ wrote:Anyone else find any ATF residue in the tubes?

None Here Mines A '03 W/ 20,000 On It

gocntry

Well I Just Did Mine.... Took About 20 Minutes....No Body Lift...Used A o2 Sensor Socket With An 8" Cresent Wrench....No Probs Here....Except For The "Free" O-Ring The Dealer Gave Me Was About 3 Times The Thickness Of The Original One On There So I Just Re-used The Original...... Jim...You Can't See...

gocntry

Ok people, this one is a MUST DO! Hey HenryJ.... Thanks For The Warning & The Write Up / Pictures :thumb: Got Mine At My Local Dealer Today....He's Not As Nice As Your Dealer, Cost Me $35.00 :x But He Gave Me A New O-Ring For Free :lol: . If This Saves An $1800.00 Repair Bill That Was $35.00 Well S...

gocntry

Here's One At Jegs Too It Says 4.3 S10 Chrome Oil Pan By Transdapt

Will This Fit??

gocntry

If The Stock Steel Pan Would Work You Could Always Call Good 'Ol Dudley Martin & Get A Price

& Part Number Then Go To Gmpartsdirect.com & See How Cheap It Would Be

gocntry

I Am Looking At Black Steel Rock Crawler Series 97 Rims...

16x8 Size 5x4.75 Bolt Pattern 4.25" Back Spacing
PCW97-6861

They Have A Lot Of Sizes In The Series 97

Look Here

gocntry

i am running 32" on 8" wheels and 4" bs with the sl 6" and pa 2" and sl 1" shacles the front is realy close. Jeggers Is It The Height Or Width Of The Tire That's Getting Close?? I Was Thinking 6"SL W/ No Bodylift And Was Gonna Run 8" Rims W/ 4.25" BS And Was Gonna Use A 265/75R16 Tire Which Is 31.9...

gocntry

Just Put The Tractor At The Back Of The Trailer....That Should Shift Things Around A Little

gocntry

No Complaints Here Either, Never Had A Problem With Mine (Yet)

gocntry

[quote="Barch97"][/quote]And, by using that pic, potential new members will gain the assurance that we don't criticize each other for poor grammar.

Ok....Now That I Go Back And Look It Should Say "Interested (IN) Performing Maintenance....

Or Am I Missing Something Else ??

gocntry

F9K9,

Thanks For The Pic.....Just Made Up Some Cards And Will Keep Them With Me Now....The Pic Is On Plain Paper But Will Pick Up Some Business Card Stock Tomorrow...

[/url]

gocntry

These Guys Make Sliders Too

Demello Offroad

gocntry

Here Is A Pic Of A Jeep That Parked Next To Me Saturday, The License Plate Said "375HPV8", I Think It Had A 9" Ford Rear End In It And It Was Sitting On 37" Tires... My Crew Looks Like A Lowrider Sitting Next To It,

gocntry

I Have A 2003 With No Problems Yet, But Last Month I Had To Replace The Oil Cooler Lines On My 1997 Astro W/ The 4.3 In It, It Has 62,000 Miles On It. So I Assume This Is A 4.3 V6 Prob And Not Just Associated With The CrewCabs??

gocntry

Got mine on today. :mrgreen: Looks great! I guess I'm going to need one too :mrgreen: Here's Mine :D http://home.comcast.net/~gocntry/CrewCab_Pics/ccsticker.JPG AZS10CREW: I Like The Spare Tire HoldDown In Your Bed, But Will It Allow A Fiberglass Lid To Be Installed Or Is It Too Tall? Would You Hav...

gocntry

If you want to read a book, here a link to my sticky thread: Hey Knaffie.... I Read The Book....The Way I Understood It Posi Loc Is Going To Install The New Version On Your Truck??. So After You Have A Chance To Test Out The "NEW" Version Please Post Your Thoughts Back Here & Let Us Know What You T...

gocntry

Here Ya Go....

RELOCATING IAT

gocntry

called the local GMC dealership and ask them if they do waranty work on Chevy's...now this is what the service manager told me....No sir...we can do all your service work, but if its a waranty thing we can't do waranty work on Chevrolet's. Hey Dont Feel Bad Don......When My Local Chevy Dealer Start...

gocntry

Somecrew, That Is Sweeet :thumb: What All Are You Running Now...6" SL - 2" BL - 35" Tires - And You Got Some Shackles & A Tbat Crank Right?? If You Go On The GWNF Run With Rusty You Guys Gotta Get Some Side By Side Shots .... Then We Can Really See The Difference. But The Truck Looks Really NICE I'm...

gocntry

WOW And It's Only $110,000.00......Hmmmm I Could Buy That Or I Can Buy 5 More Crewcabs To Go With The One I Got And It Would Cost Me About The Same Amount....

gocntry

OK,
Now Rough Country Suspensions Is Advertising A 6" Lift Is Coming Soon For 83 - 03 S 10 P/U Blazer & Jimmy.....

Look Here

gocntry

Bwenny247: Got A Couple Questions For You... How Do They Do The Rear End Flip It States On The Web Site "No Welding" And I Know The 6" SL Requires Welding?? Also Do You Still Have To Cut The Frame & Differental Like The Superlift?? Thanks For Any Help PS.....Truck Looks GREAT!!

gocntry

I'm Not An ASE Certified Tech By Any Means.......But Both Me And Mrs Gocntry Have Been Working Around And Repairing Our Own Vehicles For The Last 15-20 Years.........So Minor Welding And Cutting, And Some In Depth Mechanical Work Is Within My Reach, Plus I Have Access To A Buddy That Is A Profession...

gocntry

Just A Question For You Guys That Have Done The Superlift Install.... Can This Be Done In A Garage??....I Have Access To Most All Tools Except A Plasma Cutter, I Have A Small Mig Welder (110 Volt) Cut Off Tools Can Get Access To A Torch & Portable Band Saw And I'm Not Nervous About Taking My Truck A...

gocntry

I Have Been Beating The Bushes For A Killer Deal On The 6" Superlift The Best Price I Have Come Up With So Far Is $1642.50 + $65.00 For Shipping And This Is For The K776B Kit With The Bilstein Shock Upgrade, What Do You Guys Think Good Deal Or Keep Looking??

gocntry

Here's A Company That Does One

CFM TECHNOLOGIES

gocntry

Here Are Your Choices @ Centerline Wheels..

Build Your Own Wheels

Build By Bolt Pattern And You Can Specify From 3" To 5" Backspacing That'll Get You Close To Stock Backspacing

S-10CREWCAB.NET

Search found 574 matches

Skid Plate Help....

How About A Manifold Spacer??

?? For Bubaloo

Opinions On Backspacing 3.75 Or 4.50 ??

Think I Can Make This Work???? ( altimeter / Inclinometer )

Goodmark cowl induction hoods

Black Grill

Trip To The Dealer

31" Or 32" Tires......Can I Get Some Opinions Plea

I Feel Small

Rough Country 6" Lift ??? Coming Soon??

6" Superlift Install Question

6" Superlift Pricing.....