S-10CREWCAB.NET

Nothings worked checked everything all the wires are good just can't seam to get solved the problem also having a hard time finding a wiring diagram online does anyone know a good site to find one

I had the door off the other day doing some rust repair they work for a day or two after that and then stopped

Hey everyone here's the problem none of my Windows work I hit the switches and nothing happens on any of the doors not just the drivers. The power mirrors also don't work when I hit the switch to move then the mirror just twitch a little. The power locks work though. I've checked every fuse there is...

when looking up SFA kits do i look for ones for a blazer or s10 im never sure about that when looking up parts

And I'm looking to raise it not lower it

Hey I was woundering if any one has done a torsion bar to coil over conversion on there cc and if so how and or what did they use to do it

never mind actually read the post how much for the mirror

ill pass on the door then and are they the heated mirrors i couldnt tell

is the driver door and passenger mirror still on it

Hey guys i need a drivers side door and if possible a passenger side mirror with heat and power option

Hey guys so i cracked my bumper the other day and i wanna replace it and instead of getting a regular one i wanna fabricate a steel winch bumper. the problem is im not sure hoe to start and was just seeing if anyone had any plans out there they are willing to share.

http://www.4wheelparts.com/Side-Steps-R ... &t_pt=3485

are these what your talking about?

squeeze the slides tighter

here's a picture of the accident

Hey guys didnt have a good start to my weekend i rolled on my side in a ditch luckily i was uninjured and the damage is 99% cosmetic. So the question i have is can i take parts of a 97 donor blazer and put them on my 02 crew cab specifically the driver door and front bumper, and the donor car comes ...

Open your glove box and look for the rpo codes G80= posi Gu4= 3.08 Gu5= 3.23 Gu6= 3.42 Gt4= 3.73 Gt5= 4.10 My bet is you have 3.73 and g80 , 2nd would be 3.42 open And what's you reason for wanting to add a posi ? If it were me I would consider a lunch box locker if you are open rear , but Iam a of...

Good luck finding a zr2 rear, like hens teeth anymore. The ZR-2 rear was 3.72 gears so your front must match the same. I got lucky my truck had a G80 in it with that gear ratio so the swap was straight forward. I gave the old axle away as trying to sell an axle with 270k on it would be a hard sell....

The abs system activating would be a buzzing feel in the pedal when applied. You say you hear a "mooing". Could it be a vacuum booster sound? Is your vacuum system OK? No fluid in the system? Vacuum reservoir attached? It's the buzzing noise and push back you get when the abs activates mooing was p...

hey guys i just replaced lots of parts on my 02 crew cab ls and one of those parts was the wheel hub with the abs sensor. the reason i replaced it was when i would step on the brake it would make a mooing noise at me i was told it was the abs unit. so i replaced the whole hub and unit assembly but i...

thanks for the info ill gust swap the rear end

Hey first post to the forum and I'm thinking about putting an lad in my 02 s10 crew can I know I can grab one out of a g80 code car but my question is when pulling one out of a g80 do I just need the diff or do I also have to pull the pinion shaft? Or if some ones done the same thing and can tell me...