S-10CREWCAB.NET

Built2Bend

I’m still working on tearing down all my front axles to put one back together. And get the left over parts ready to sell

Still can’t figure pictures out some times they wo to some times they don’t idk?

Built2Bend

Picked up a full flat 14bolt finally cost more than I wanted to spend but $100 ain’t to bad.
[url=https://ibb.co/2YYhZVf]

[/url

Built2Bend

Awesome thanks for the info I’ve been trying to find gears for the 44 I’ll check that out and I’ve already pulled the brake lines off and scraped them I’m thinking with how much I plan to modify this truck I’m gonna have to custom make all my brake and fuel lines. I dident mention but I plan to run ...

Built2Bend

Sorry I’m computer illiterate I still can’t figure it out I have picture on my iPhone and created that ibb account and still can’t seam to figure it out. Now my plans the truck is pretty mush just a bare frame and bare cab. A long time ago I picked up a 78 f250 Dana 44 I plan to use but I’m gonna sw...

Built2Bend

Sorry I’m trying to learn how to upload photos again Dose photo bucket work?

Built2Bend

https://ibb.co/pwDmNtQ
https://ibb.co/TwQNjkG
https://ibb.co/k9Q2mC5
https://ibb.co/jWM5qtH
https://ibb.co/dbSH9Wb
https://ibb.co/3NzLxV3
https://ibb.co/cbBS9pQ
https://ibb.co/55bvhC8

Built2Bend

Hello everyone damn it’s been years since I’ve stopped in here. Sorry about that much has changed this black crew cab is my daily driver and is not in the best shape. I’ve bought another crew cab frame and bare cab that I’m going to build I have the front axles, sas brackets. I’m cutting the ifs bra...

Built2Bend

I would not add the 2.5in lift and crank them more than rough country says there lift already cranks the torsion bars to the max I wouldent go any further. If your dead set on 5in about your only option is a 6in lift kit. Sas Or go with your idea but don't try to crank the torsion bars beyond rough ...

Built2Bend

So your just running stick shocks with the rc2.5in lift?

Built2Bend

Ya idk where your located but I'm scrapping an s10 now I'd trade you my spare for your donut.

I have bilstein shocks up front in my truck. And Monroe coil overs in the rear both seam good haven't had problems yet.

Built2Bend

Lol. I haven't done anything to my truck for a while. I've been building a zombie s10
http://i.picresize.com/UJZH

Next I'm Gonna mount the machine gun

Built2Bend

Lmao when I got my crew I Dident get any floor mats. Ok back to stukys projects. Sorry for the floormat hijack

Built2Bend

What's your location? Depending on shipping I may be able to find ya an axle for a decent price. There all over my local junk yards.

Built2Bend

I got ahold of diversified creations and they still have s10 cut out flairs they're selling off they said they have some scratches from being moved around so they'll need painted or bed lined. They're $500 a set I believe but that's an option. You'd still have to do some work to make them Fit on the...

Built2Bend

Have you seen the 4wd factory hidden winch mount? It's half the price of the synergy and has shackle mounts also.

Built2Bend

Have you seen the 4wd factory winch mount? It's half the price of the synergy and also have shackle mounts on it.

Built2Bend

Maybe I'm missing it how are these different from zr2 flairs? They seam crazy expensive?

Built2Bend

I haul a few thousand worth of tools in my truck on a daily basis. I do a lot of farm work which ranges from carpentry to mechanical work to machining and so on. I also build derby cars so I carry a s### load of tools and spare parts for that to. I use a diamond plate tool box in the bed to hold all...

Built2Bend

Ok sorry i just found this I'll look back after I post this and double check My info so that I'm not giving false information. It's been a while since I did mine. Now the bravada shaft is about 1/8inch longer than your 2 piece combo. If you remove your 2 piece shaft you'll notice the inner shaft has...

Built2Bend

No because the blazer ones are made to go under the rear seat slightly. there is no where for them to fit under are rear seats. I've seen people make them work but they have to pretty much cut the hole back off the floor liner, and by the time you do that what's the point of even having it.

Built2Bend

Ya I know weather tech makes Fronts. But I want a rear I was hoping maybe some other company made them

Built2Bend

If you don't mind Let me know who makes that floor mat when you get it I Dident
Know a company made one for a crew.

Built2Bend

What's going on with this?

Built2Bend

We need some pictures of these. I'm actually looking for led to do my interior lights now.

Built2Bend

I hate to drag this back up guys but I'm looking at buying a set of these any one know where I can find some good install instructions? I can't seam to find any?

Any other info or advice about them?

Built2Bend

We have got to see pictures of this truck!!! Welcome

Built2Bend

Wish I had the money for it.
But I hope you don't mind a quick question. How did you get the zr2 rear flairs to fit?

Built2Bend

Welcome to the forum. Nice truck.

Built2Bend

As Henryj said frames are pretty different. But you don't have to have a zr5 frame. The zr5 are only an appearance package. So any crew frame should work. There's actually a crew in my local pick n pull if your close by you could try and pull the frame from it. Or find a crew at one of your local ju...

Built2Bend

Been a while. Got a lot done to my truck today. I changed both from axles and front hubs. I also installed a bravada shaft. I need to delete the actuator still and I'm not exactly sher how to do it. So any help with that would be great. I can't post any pictures because photobucket won't work on my ...

Built2Bend

Welcome to the board. You can buy a locker for your front axle but for cost and labor to install I don't think it would be worth it. plus all the stress on your aluminum diff your just asking to destroy your diff plus all the extra traction would put more strain on are already weak steering set up. ...

Built2Bend

What are your plans? A crew cab and bed on zr2 frame? Or do you want to keep the 6ft bed.

Built2Bend

Really. Logan's has bad reviews. I was talking to them about building me a bumper seemed like good people. They were even wiling to custom make a grill guard for mine because I don't like theirs. They said I could pay half now and than the other half when I pick it up(located only 3hrs from me). The...

Built2Bend

Ya I just saw that synergy doesn't have boondock bumpers any more. Maybe you can get ahold of boondock. But if I remember right they were way over priced.

Built2Bend

After I add everything I want to the tag bumper (I think they're blue lake off-road now). It's cheaper to get the logans metal bumper and Logan's builds them for body lifted trucks. But I never heard from any one who owns one of they're bumpers.

Built2Bend

Yes kennasaw mountain became alien patrol, and than tactical armour group, and I think blue lake off road now. I'll post a link to the only winch bumper builders for s10s.

Here's a link where they are all listed except for the one above.
viewtopic.php?f=3&t=9142

Built2Bend

I destroyed mine getting it out if I remember correctly it's actually glued in place and I don't think you can get it out with out breaking it

Built2Bend

I own an 04. And I can tell you a steel tank (like that comes in a 01-02) will not work with your factory sending unit. And plastic crew tank should work. I just had to replace my sending unit and learned that steel and plastic sending units are different. If you want an older steel tank there is a ...

Built2Bend

Ya I just happined to see a picture of the truck on a s10 Facebook group and started talking to him about it

Built2Bend

I got an update I just met the guy who bought the original tan v8 long bed sas truck I posted. They wanted $6,000 He picked it up for $4500 said he loves it and not a single thing was rigged of half assed on it.

I really regret not trying to buy it.

Built2Bend

I just received my skid plate in the mail it's in great shape good price and great seller!!

Also my post office complimented your "creative packaging"

Built2Bend

You said you don't like carbs but want it easy maybe you could look into throes electronic carbs? It's a fuel injecting carb that is controlled by a computer but most of them I believe are self leading you install it all and butler start driving and the computer will learn by it's self.

Built2Bend

I've never changed mine. I should really do that. I'm sure no ones done it before me.

There's ready air in my system. I need to fix that still.

Built2Bend

I hit a mile stone the other day

Upside down it's( boobs! )

Built2Bend

Got a discount code

3502781431922330

Expires October 25 2015

Good for 5% off

Built2Bend

Do you have any pics? Idk what the clips look like yet my flares are just starting to come loose every now and then. (So far I just push them back in and they'll stay like that for a couple months then start to separate from the body Agean. I want to try and have stainless steel clips like deere lay...

Built2Bend

Old deer Slayer how did your flares turn out? Can you post some pictures my inner metal clips are rusting off and I'm going to have to fix it soon.

Built2Bend

Thanks for the offer but it looks like I'm going to a demolition derby the 7th. And knowing my dad we'll be geting the car ready Saturday and Sunday to go.
Plus I'm in charge if building and taking my nease and nephews derby power wheels

Built2Bend

Try LMC maybe they're part numbers would work.

https://www.lmctruck.com/icatalog/cst/s ... Terms=Tank

Built2Bend

Found another sas sonoma crew this ones in Georgia.

http://atlanta.craigslist.org/wat/cto/5143967791.html

Built2Bend

I would like to go but I don't think my truck is offroad capable enof. . . Yet

Built2Bend

There's some one on zr2usa that's planning on making these with stainless pins and brass bushings. It's in the unique mods section. But I don't own a zr2 so I can't join to try and buy a couple.

Built2Bend

Is it possible you have a couple wires switched? I know it sound stupid but I've seen master techs do it by acident before. Good luck with your truck I hope it all works out. I got a funny story kinda simalar. When I did my head gasket on my 4cyl s10 I bent a pin in the plug for the fuel injectors i...

Built2Bend

I'm also interested in find a larger radiator. Something I was thinking about was find a v8 s10 radiator kit. But I don't have any tools so I'll have to use a full bolt on kit(which I don't think exist) but if people are making them fit with a v8 I assume they'll fit with are v6s. Something to consi...

Built2Bend

What kind of transmission problems, and creaks are you geting some one on the forum may be able to help you. Did you correct the speedometer on your truck. I've herd of transmission problem after lifts becoulse the truck thinks it's going faster than it actually is and as a result the trans trys to ...

Built2Bend

I'll message you once I get payed the 31st

Built2Bend

We'll yesterday I went to walmart. Went to leave and my truck wouldent start. Cranked over just fine but no start I turned my key on went back and couldent here my fuel pump. I want back into Walmart and bought a can of starting fluid. Came back out sprayed a little I. The engine it fired right up f...

Built2Bend

http://prescott.craigslist.org/cto/5113350026.html

Built2Bend

Another sas crew cab
This on in navada

http://flagstaff.craigslist.org/cto/5117241670.html

Built2Bend

Wow good thing it looks like the tree only got the front door.

I wish I could do a solid axle swap. Your truck is my inspiration.
Keep it up

Built2Bend

I am.

Built2Bend

Did the copper line you've seen fail have a steel inner? I would think with the steel inner it would be plenty strong enough.

Built2Bend

If I were you I would also pay the extra $1 or 2 a foot and get copper brake lines so they won't rust from the out side again. also if you replace the hole line you need to cut off and take the fittings on both ends of the line to the part store with you idk about every one ealse but my local part s...

Built2Bend

I've on and off had a similar problem HenryJ pretty much covered every thing that I would suspect. But my question is when my truck dose it it's on start up it will idle low and misfire with no code. But one I give it a some throttle 2,000 rpm or so it goes away and then the truck will run and idle ...

Built2Bend

That switch panel is really cool. Id like to do something similar. That would be great for my roof led bar I have. And am sainting to install Do you plan on building rock sliders for it? And if so would you be interested in building a couple extra sets to sell. I'd be interested(I want sliders but h...

Built2Bend

Here's that link sence that one dident work
viewtopic.php?f=14&t=8980

Built2Bend

I don't believe these are pa3 but they'll give you an idea maybe
http://www.s-10crewcab.net/forums/viewt ... =15&t=3551

Also here info where they talk about this
s-10crewcab.net/forums/viewtopic.php?f=14&t=8980

Built2Bend

If his rims are 5in bs. Than 4.75in bs means you wouldent need spacers becoulse there's .25in more space between the inner rim lip and your chassis so you wouldent need spacers. And I believe any 15x8 rim with 4-5in back spacing would work. Just depends on how far you want them to stick out and what...

Built2Bend

Here is a thread not to old where we covered all the winch bumper options I know of not counting custom ones.

viewtopic.php?f=3&t=9142

Built2Bend

The guy that made those was actually selling them I don't think they were to
Popular. I've seen the thread where he was wanting to sell them but I don't think any one bought them can't quite remember.

Built2Bend

We'll quick up date on some of what I've done. first I installed 1.5in hub centric wheel spacers here's a couple pictures Before http://i1376.photobucket.com/albums/ah5/Austin_Tomecko/Mobile%20Uploads/image_zps8duxu0er.jpg Before http://i1376.photobucket.com/albums/ah5/Austin_Tomecko/Mobile%20Upload...

Built2Bend

I just found some at my junk yard there's 2 bolts that go thru the bumper and 1 plastic river

Built2Bend

Ok we'll I got my bar but now I'm thinking I'd rather have a curved led bar to fit the roof line better. So I'm not 100% on which I'll use.

Built2Bend

If brule buys it and you drive it to him can ya stop by my place so I can check it out to? Haha

Built2Bend

Yup if I had $6,000 I would own it.

Maybe I should go talk to the bank. Lol

Search found 160 matches