S-10CREWCAB.NET

thanks Hartlybl ! I was beginning to wonder if anyone had the answer, btw, im just down the road from ya, Jackson co. Fl. thanks again , Keith.

How do you remove the entire high mount brake light assembly, not just the lens but the base as well? 2002 CC thanks , keith

hey yall , how do you remove the chmsl assembly (entire fixture/base) not just the lens, I know how to do that(screws).gonna modify it to include turn signals, thanks. Keith 2002 cc

welcome to the forum dchs51, I'm just down the road from ya a little piece, in Marianna Florida. good luck on your search

10-4, I appreciate the help. I was thinking of doing exactly what you suggested, great minds think alike!!!!

ok, I understand what your saying but if I have the harness/plug for the rear wiper/wash/hatch behind my blank dash filler then where would I find the other end of the wires in that plug? would it be just an unused connector under the dash/ carpet/or headliner,? can you maybe give me a location to l...

As I've read that our trucks received the suv wiring harness,(re: blazer rear wiper switch and harness) where in the back of the cab would I find the other end? thanks, Keith

the last paragraph is mine,i meant to put the first in quotes Keith

Tach's cab quadbeam mod page wrote: Image Splice tap the green w/white wire (high beam +) attach to relay "activate +"(#85) , Splice tap the yellow wire attach to relay feed (Normally Open #30) , attach a wire ,or wires, to a good ground and connect it to the relay supply (#87) and to relay "activat...

DRL's are disabled so they are a non issue,your idea of taping from the highbeam lamp sounds feasible ,but if the BCM drops ground to the fog relay on highbeam then that signal wire will need to be cut to keep the fogs on. ill study on this over the weekend!

you may be correct, however remember our (my) trucks under hood fuse center doesn't have separate relays for low and high beam but instead has one relay for "HDLP PWR" and then two fuses "LT HDLP" & "RTHDLP". determining where to come from with the diode to the fog relay is in question.

Problem solved,DRL's are now disabled. removed relay and put a jumper wire between sockets for terminals 87a & 30 to maintain the closed contact of the relay, now I understand when it was said to bend over a relay terminal but the thread I read some where didn't say which, it must be either terminal...

this as is will not work for the S10, different set up in the fuse center, but a very interesting way to achieve my goal. I will study it further ,perhaps it can be adapted to the s 10's.

have relay in hand, it is indeed a five terminal with a 87a to 30 n.c. circuit which must be maintained at dark during normal high beam function for both highneam's to light . during daytime and DRL function, this circuit is broken, effectively turning on the DRL's. if my thinking is correct,which i...

Has anyone made any progress on this? I sure hope so as I would like mine to stay on with the high beams.

thanks Rob ,ill give that a try, I also just posted again to "DRL,AHL, Quads all working together " thread . Keith

ok last night after work,I looked for a DRL fuse both in the interior and under hood fuse centers. there is no fuse labeled specifically for the DRL's just the DRL relay in the under hood center. removeing it gives only one high beam at night. I have read a post somewhere about bending over a termin...

No , I didn't try pulling the fuse because I followed the instructions at the beginning of the post" 2000 and newer trucks" however I didn't realize that it was meant only for the ZR2 trucks until today. :oops: I did pull the relay but that only gave me one high beam at night :roll: now ill try the ...

Re: DRL, AHL, and quadbeams all working together!!! Postby rockinjranch » Wed Dec 10, 2014 9:18 am In regards to the DRL disable,I have looked on my "02" for the relay under the brake pedal, under the carpet,etc etc. I have found no such relay anywhere in the general location . I did find a plug dee...

In regards to the DRL disable,I have looked on my "02" for the relay under the brake pedal, under the carpet,etc etc. I have found no such relay anywhere in the general location . I did find a plug deep under the carpet taped to the main harness against the floorpan but it was only a 12 wire ground ...

Thanks _STUCKY

what is the part number for the daystar shackles?

new member here, been lurking around in the background.Bought my o1 cc back in june this year,luvin it! Been reading and reading but haven't been able to find the part number for the Daystar lift shackles that ive read in posts that have been used and Daystar website doesn't even list apps for S-10'...