S-10CREWCAB.NET

mfulaytar

Anyone know where i could get a bumper like this made? or if anyone is capable of making such a thing i would be willing to pay.

mfulaytar

sorry for the late reply, i used some silicone caulk around everything. No leaks yet! btw, i had to go buy some longer bolts from advanced auto parts as the ones the sent were not long enough. while youre at it, buy some nylon lock nuts. its very hard to maneuver in there and i ended up dropping a f...

mfulaytar

yes that is correct. luckily for you the price dropped about $60...

mfulaytar

Yes the brackets came with it!

mfulaytar

well i finally got the chance to put the light bar up and im pretty pleased with the results. it wasnt terribly hard, the hardest part was taking the headliner down. let me know if you have questions.

mfulaytar

ive heard great things about the 6" superlift and its probably the lift i will go with. you could fit 33s comfortably but with cutting of fenders i think you could fit a bigger tire but its not a good idea with IFS. if you want to go bigger than 33s look at a solid axle swap. there is loads of infor...

mfulaytar

found this in the rear basically at the bumper. looks like its connected to taillights? is this the wiring i need?

mfulaytar

could be the cv... my cv boot split open once and after everything inside of it was destroyed when i had to go through some mud, it made a horrible noise.

mfulaytar

UPDATE: i had that switch installed and at first my 4wd still did not work so the mechanic "adjusted" the actuator cable and everything worked great. went in and out of both 4hi an 4low perfectly. Later that night, on my 7 hour drive to north Tennessee, i hear a weird whining noise. i pressed the 4 ...

mfulaytar

Do I use the wiring from my existing 4 flat??

mfulaytar

wow that looks great. did you use a dremel?

mfulaytar

Well I pulled my actuator and the cable and I'm pretty sure both are just fine. Seems like the actuator is holdi vacuum and the cable slides pretty easily. Is it worth replacing them anyway? Tomorrow Im going to have my vac lines replaced, well the ones I paid for but they didn't do. Also I'm gonna ...

mfulaytar

I will be renting a camper trailer to haul from warner robins, georgia to panama city beach in florida for spring break. according to google maps its a 5:30 ride and about 275 miles. Ive pulled my 3,500 lb ski boat about the same distance with no problems except for horrible fuel economy. the traile...

mfulaytar

Thanks a lot guys. I really appreciate the help.

mfulaytar

looking great. makes me wish i had the knowledge, resources, and mechanical ability to do this.

mfulaytar

well i reattached the vac line. it fits pretty loose so i guess ill need to replace that. 4wd still doesnt work. i suppose that ill have to find the t case switch and replace that. i still hear a hissing noise when i put the ac selector on just the foot setting. i saw on the s10 forum that people we...

mfulaytar

I found a vac hose that wasn't commected to anything. I'm not sure where it's supposed to go, I can't find anything. I've searched high and low for the transfer case switch and I cant find it. Also, I pressed the 4low button and put it I'm drive and stepped out while it rolled. When I looked under, ...

mfulaytar

well i bought the new transfer case switch and what i pulled off my truck doesnt look like what ive seen on here.

mfulaytar

read that that sticky and now im scared to death. i do have that hissing sound sometimes, but when i switch to just floor heat, some air still comes out of the vents for a little while and then it stops, and the hissing noise is constant. im going to get get a new transfer case switch and throw that...

mfulaytar

I recently had my transmission rebuilt and since i got it back my 4wd has ceased to work. and i know this because when my buddy called to me to come pull him out i also got stuck. so i take it back to the shop and they tell me that my vac lines and actuator are all full of mud and that they would bl...

mfulaytar

buit2bend, that sounds like it would be awesome. just gotta do it right so it wont look like crap. if you're referring to the rough country mounts, be careful when you go to weld them because they are expensive (like $70 a set)

mfulaytar

If I'm not mistaken there's a thread on here where someone took a rack off a 98 blazer and said it went right on without modification. Can't remember who it was....

mfulaytar

Screenshot (57).png im not sure how this guy did it but i dont really like it Screenshot (55).png this guy secured to a crossmember on his roof rack. im not sure how. Screenshot (56).png this guy used the rough country light bar mount for an 07 silverado. i think he said he had to bend the brackets...

mfulaytar

@Built2Bend ive seen led bars secure to roof racks on blazers and it looked okay. ill try to find a picture. this is exactly what i was thinking of doing.

mfulaytar

I'll get back to you guys with pictures. Outa town right now and left it at home. The light bar does come with mounts but the problem is that the roof is curved on the edges so the mounts won't sit flush. I was thinking about Putin a blazer roof rack on their and securing it to one of the crossmembe...

mfulaytar

In s10 forum I believe. (I'll find it in a minute and link) it has a thread if people showing where and how they installed them. Also I'm curious what brand of led bar did you get and if you don't mind how much did it cost thanks. got it off amazon! here's the link. http://www.amazon.com/gp/product...

mfulaytar

Thanks for the insight. I hadn't thought about glare on the. Guess I'll just have to hook it up and mess around with it!

mfulaytar

Just bought a 42" led light bar and I haven't been able to find anything on installing one on an s10 or anything other than a jeep for that matter. Just wondering if anyone has done this?
Thanks

mfulaytar

The second instruction pdf took me to a bds suspension lift and it didn't adress either of my problems...

mfulaytar

so this weekend i went ahead and tried to install the pa 2" bl. biggest pain in the ass. took me all day Saturday and Sunday. It still not finished right however and thats in the back of my mind bothering me. i couldn't figure out the oil filter drop brackets to save my life.the two bolts that you a...

mfulaytar

are these still availabe lol.....

mfulaytar

looks sweet man... really want to do the superlift on mine

mfulaytar

If you turn the key to run, without starting, and it works then maybe the fuse for the RAP is blown? I think theres a fuse for that i forget. Does anything work in the accessory position? The wipers and windows should work. thanks for the insight, im not sure I haven't noticed. next timei go out to...

mfulaytar

well I went and played in the mud a little today, but little did I know that my cv boot was busted open. so now my driver side cv is making an awful racket. I assume that means I need to replace the cv axle. what do you guys think? I am somewhat mechanically inclined, do you think I can do this myse...

mfulaytar

thanks for the quick reply!

mfulaytar

I found a super good deal on a set of 4 z28 wheels. I just got new tires and cant afford to buy a new set however. are the stock s10 rims and z28 wheels 100% interchangeable and I can just have my new tires put right on these?

mfulaytar

seriously? no one?

mfulaytar

Hello all I just installed an aftermarket radio and now it only turns on wen the ignition is in the on position and not when you turn the key back for accessory power. The radio was $50 so could it be that it's just a cheap radio?

mfulaytar

Hey everyone I just thought I would take a moment to introduce myself and my truck. I just bought this 2003 s10 cc with around 160k miles on it. the older gentleman who owned it took very good care of it, it just needs a little maintenance. I've already put a set of cooper adventurer ATs on it and l...

mfulaytar

Thanks guys

mfulaytar

sorry cant get them to show as pics but heres links https://www.facebook.com/#!/photo.php?fbid=637233996332530&set=pcb.655140194522489&type=1&theater https://www.facebook.com/#!/photo.php?fbid=637233726332557&set=pcb.655140194522489&type=1&theater this looks really good.... so you made the correct ...

mfulaytar

HenryJ wrote:Keys may be a fail. Stock keys can already go beyond what balljoints and cv can handle. Cancel or return those if you can.

How much should I crank the stock keys on it? Is enough to gain two inches safe?

mfulaytar

How long do you plan to keep the truck? Bilstien is a lifetime shock. Not just the warranty, they really do last that long. It is in the patented design. Ride like a Cadillac and perform like a trophy truck. Tons of threads include the part numbers. I don't know them off the top of my head. They ar...

mfulaytar

impressive..... I myself prefer a lifted truck. but I like what you've got going. keep us updated.

mfulaytar

... I'm still unclear on what the marvelous mystery lift is, and yes I've seen the thread. I've gathered that it isn't a kit, it's a bunch of crap you have to get separately. I just don't know what to do.... Body lift, shocks, bigger tires t-bar adjust, springs or shackles and fender cuts. Maximum ...

mfulaytar

Thankyou guys for your responses!

mfulaytar

I have some mechanical ability but not enough to do a sfa. Don't think any mechanics around me would know how. Can't find a detailed write up on it. I'm still unclear on what the marvelous mystery lift is, and yes I've seen the thread. I've gathered that it isn't a kit, it's a bunch of crap you have...

mfulaytar

what do you think about going straight for the RC 6" lift?

mfulaytar

Hey guys I'm new here and I will be getting a 03 s10 crew cab 4x4 this Thursday to replace my car that some idiot totaled. Some of the CCs that I have seen look pretty BA but the one that I'm getting was owned by an older fellow who took really good care of it, but it is completely stock. My problem...

Search found 49 matches