S-10CREWCAB.NET

Crew02

I have had one for a couple of years, still think it looks good...

Crew02

This is all I can find about the fuel injectors. http://www.jsonline.com/news/metro/jan05/291186.asp Clogged injectors traced to sulfates GM says it has found cause of malfunctions in thousands of area cars By RAQUEL RUTLEDGE rrutledge@journalsentinel.com It doesn't explain the who, when, where or t...

Crew02

I have done a search and can find nothing about Techron and GM other than GM recommends it.

Crew02

Has anyone looked into replacing the stock throttle body with an aftermarket?

Crew02

My gas milage had fallen off a little a couple months ago. I ran the chevron fuel system cleaner through and it picked back up.

Crew02

The funniest thing I found so far is that the alarm only sets if you lock the truck with the key fob while the drivers door is open. If it is closed, the doors lock but the alram is not set,

Crew02

I know the radio opening for 01 is a double din size and a din and 1/2 for 02.

Crew02

Well my truck is a 2002 and I have just turned 90,000 miles. I had the coolant flushed last week. After three years and 90,000 miles it was still clear and not clouded. I actually had to insist to have it flushed because the service guy didn't think it needed it. So I cannot complain about the dex-c...

Crew02

I just won this auction. Do I need to replace the factory coil when I install it ? The MSD coil does not seem to be rated much higher than the factory one. I am going to replace the plug wires, but is there anything else I should replace? http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item...

Crew02

There has been a lot of talk lately about towing with the crew cabs. I tow with mine and do not have any problems. I have added a transmission cooler , temperature gauge , and have the fluid serviced every 50,000 miles. While the Crew Cab is not an ideal tow vehicle, its not that bad either. There a...

Crew02

kf6kmx, The 5200 lbs Tow Rating From GM = The Empty Truck + Driver (No Passengers)...For Every Pound You Put In The Truck You Subtract A Pound From The Trailer Rating. Jeff My owners manual states that the 5200 lbs includes the driver and one passenger. We have a frontier by KZ. It is a 2205QS-F ht...

Crew02

I wonder if you get a set of steak knives with this thing?

http://www.esuperchargers.com/

Crew02

I found this while looking for something else, but remembered several people asking about towing and transmission modifications. Thought this might be if interest.

http://www.keystonekrawlers.com/Mods/GM ... n_mods.htm

Crew02

KC did you ever get anywhere on those flares your were making? I see from the photo you have some on the rear of your truck. Are those ones you made or are they the Bushwackers cut down to fit?

Crew02

Nice looking Truck. Do you have any idea what the kit will retail for?

Crew02

From what I can see, it looks like a very nice product. And from what you have said about the ride quality and handeling, it sounds like thay really did their homework. I would like to see some more photo's of the underneath of the truck. Or have they asked you not to do that until it is released? A...

Crew02

If I remember correctly, when he had it installed didn't he say that the shop that put it on reinforced a lot of the parts and for some of the parts they just made new ones. That would explain why he hasn't had any problems.

Crew02

Yea, I bought the dash piece off of ebay for 14.00. I also got the Pioneer for a $100 because it was an open box. I'm cheap, but I still like things to look good.

Crew02

Mine also has the double din opening. I want to install a 1 1/2 din radio. I have ordered the trim bezel for a 01 so I can install the radio and make it look factory. The radio I am installing is the Pioneer DEH-P77DH. The guys over on S-10 forum had installed it in an 01 with no problems. I have ha...

Crew02

Thanks!

Crew02

Can someone with a 01 CrewCab measure the opening they have for their radio in the trim piece that surrounds it? Thanks!

Crew02

Do we have any pic's of the lift yet?

Crew02

It all depends on what you want to do. Bottom line is that the S-10 is not a good platform to build a rig out of. It is a great truck, and has a lot of good qualitys. However, for serious off roading, there are better choices. There are several choices that in their stock form are very trail worthy....

Crew02

Any more updates?

Crew02

I got a hold of the guy that NTXCrew had said that Superlift had his truck. It is a crew cab too. :thumb: I don't think I could do without my truck that long though. :shock: Re: Superlift quote: Crew02 wrote on 01-03-2004 11:47 PM: Have they givin you a time line as when the lift for the NON ZR2 wil...

Crew02

I contacted two different dealers about the Superlift kit for the NON-ZR2 S-10. Here are the two responses I got. Just a Little FYI From: Kevin Wyas Date: Friday, January 02, 2004 11:14:32 AM To: kttunstill@earthlink.net Subject: Re: Web Comment: 6" Superlift Hi Tim, I talked to my sales rep last we...

Crew02

Same bar that I have. I really like it...

Crew02

This is a question for Henry. After looking around and listening to comments about our truck beds, it is pretty well known that our bed is from the Isuzu pickup. I found where they offer Extend A Fender flares for the isuzu but only in a complete set. The part # is 91902-01. That would mean that you...

Crew02

I think I am going to order this unit next week for my truck. I don't think it will help with what you are wanting to do tho...

Product detail

Crew02

I spent the other night drug out to a few clubs by my wife-to-be, and she was meeting a few of the "girls from the office". I was like "uggggggghhhh" I quit clubbin years ago, but decided to give in this once. I get there and one of the "Girls from the office" has drug her significant other out wit...

Crew02

Summit Lists PN# PRF-30822 for 2003 models. However, it is cheaper for some reason. $36.95

Crew02

For those of you having a problem with this, you can buy a kit to do it from Summit. It includes the relay, and all of the wiring. Oh, and instructions. It is a lot more expensive ($37.95), however it is painless.

Summit PN# PRF-30821

Crew02

Ok, after looking around a bit, it appears that the last 3 in the 233 means that it has electric shift. On the Dakota CC site, there is a guy who says that the 231 and the 233 are the same internally. I don't believe it. If you look New Venture's web site the torque values and the Max GVW are lower ...

Crew02

Wonder if that'll work with our 233's. And if it does, it may hit the rear tbar hanger. At least it might with mine with the rearward relocation with my tbar relocators. :roll: I dont know, I thought we had 231's like in the earlier S-10's. I can go to bed having learned something tonight. :D I don...

Crew02

The 231 transfer case is not junk, On the contrary once a slip yoke eliminator is installed it's a pretty tough case. I have had very few problems with mine. Check out this article from Novak Conversions.

http://www.novak-adapt.com/knowledge/np231.htm

Crew02

Now that they have dropped the Morse Code test for the Tech license, it is easier than ever to get your license. They have computer software with the test pool of questions on it that you can take. When you get the wrong answer, it will show you the correct answer. You can learn the material in just...

Crew02

I think it was HenryJ that said he had put 55 Watt bulbs in his driving lights. Is there a different # for that bulb? Or is it the same # and you just have to find the higher wattage?

Crew02

I must admit I am a fan of the Mag light too. The only difference is that I like the C-Cell version. The narrow body is alot easier to keep a hold of. I keep 2, 3-Cell lights in my truck. I have been debating on getting the Mag charger. Does anyone have one that can tell me what they think about it?

Crew02

HenryJ wrote:
Bad_Ass_S10 wrote: i am not after size i just want a clean/ good looking trk.
I think you got your wish, the truck DOES look good
Don't take anything here personally, were all just here to offer different points of view, debate them and share information.

I second that. Good looking truck.

Crew02

I've had my Ham licence for almost 15 years now. It is really a must if you too far off the beaten path. If you need help cell phones are ok, but their not that reliable once you get off in to no mans land. And when your in the mountains a CB drops back to line of sight. Having the 50 watts of a Ham...

Crew02

Yes, 31's rub. But, is it because of the height or the width? The width is 10.5" on a 31" tire, and this is the major factor concerning the tire commng into contact with the frame. The tire I was talking about is only 9.3 inches wide which is narrower than a 30" tire. Which means you will have less ...

Crew02

Crew02

The patch should work fine. Goto a local shop and let them do it. Those guys are #### over safety. If there is a problem they will let you know. But they will do a good job. It is acutally illegal to use a plug over there. It wont pass their inspection. I guess that you are military so you don't hav...

Crew02

I would have thought you have gotten better than 18 mpg with that lid. Have you checked it since it was installed? Also, I run 93 all of the time. I'm on a car allowance from work and they pay for all of my gas. :D Just wondering? , what altitude do you run at? I was just wondering because I have a ...

Crew02

Yes, if one is off, they both are off.

Crew02

Nope, odometer is correct. Reset with the Hypertec Programer.

Crew02

Ok, I filled up this morning, and it took 15.4 gal. At that point milage was 310, so 310 / 15.4 = 20.12. But most of that was at 75- 80 miles an hour.

Crew02

I drove home from Richmond VA this afternoon. I filled up in Richmond, and 305 miles later rolled into my driveway flat on "E" with the low fuel light stareing at me. Too tired to stop.

It was interstate all the way tho, not a good benchmark.

Crew02

I have thought about this myself in the past. Someone told me one time that our front fenders had a simular opening as the early 70's model chevy trucks. And that the Cut outs from Bushwacker might fit. I don't know if this is true, someone will have to goto the mall with a tape measure.

Crew02

I have them on my truck too, I did not notice any change as to the relationship between the tire and fender. So if there was, its not much.

Crew02

a2b wrote:with the wheel wells being so small...3 inches will still only get you 31's by itself and thats still with rubbing. s-10's need 7 or so minumum to clear 33's...

I don't need 33's, I just want it to look like a truck!

Crew02

If anyone made a good quality kit in the 3" range, I think most people on this board would have one! I know I would.

Crew02

I would not advise doing that, Unless you want to remount your tires every time you rotate them.

Crew02

I have them in the front and rear of my jeep and I love them. They have been in there for about 8 years and I have not had any problems. Besides, you should not blow bubbles unless its not installed right.

Crew02

Good lookin Wheels!

Crew02

Here it is. http://www.s-10crewcab.com/coppermine/albums/userpics/benniespictures/DSCN0766.jpg A lot of the mods can be seen now. It is as high as a ZR2. Runs great and holds that road. Did 1200 miles in it yesterday. In all kinds of conditions, rain, heat, mountain passes and flatland. Started at ...

Crew02

I learned along time ago that the BFH was the best tool in the box! It is the only tool you will ever own that is fully adjustable and will make just about anything see things your way!

Crew02

Ok, forget the ARB. This is the email I got today from ARB. Forget the nice things I said about those guys, their counter people are stupid too. Oh well. From: Scott Cohen <scohen@arbusa.com> [Add to Address Book] Flag Message | Mark Unread To: 'Tim Tunstill' <t.tunstill@earthlink.net> Subject: RE: ...

Crew02

i feel it's my turn to say.....yep that 16 wheel over your stock will add an inch right there, putting you at a 30"tire. but then im not sure about that 85 wide. The wheel size has nothing to do with the OD of tire. AZS10Crew said that he did not rub with 30" tires on his truck before he lifted it....

Crew02

Ok, If I were to install a 16" wheel with 5.5" of back spacing with a 235x85x16 tire, Do you think it will rub with the 2" BL and TB crank? The 235x85x16 is 31.7" X 9.3". The only reason that I ask is because my tire dealer does not stock this tire and if I order it I'm stuck. The tire is the BFG AT...

Crew02

On the first page of their application guide it states that the list covers most of the applications, but is not a complete list of all possible applications. That’s why I like ARB, not afraid to think outside of the box. Or in this case, outside of an application guide! I wish more manufactures wou...

Crew02

I would check to see that the bulb is inserted correctly into the switch from the back.

Crew02

Nope, You can buy it today if you wanted.

Crew02

Did you get it to try? It is a good looking bumper.

Crew02

I spoke with Jeff at ARB and he said that the RD10 will fit our trucks. He said that there were a few items that had to be swapped out for installation into our trucks (Different set of bearings) but other than that no problem. The ARB carrier is good from 2.73 to 1 and up. If anyone has any questio...

Crew02

Thats looks like the factory Baja bar from the older S-10's. If so, It won't fit.

Crew02

Ok, Trailmaster says that it is not ok for the Ext Cad either... Hum... But the shorter wheel base will create a greater drive line angle which is susposed to be the problem...

Crew02

So if they are both the same wheel base and the kit is ok for the Ext Cab, then what is the problem with the crew?

Crew02

I had a 69 Mustang with Highjackers, Sticker on the window. Also had Big Boss tires on the rear!

Crew02

I think that their comment about the rear drive shaft is pretty week. After installing lifts on Wranglers for years, 5" of lift on a drive shaft that long should not be a problem. The rear drive shaft on a wrangler is a incredible length of around 14". With a 4" lift, trailmaster, rancho, and procom...

Crew02

Yea, Thats the way it used to be here. You would pull your truck into one bay and they would type your Vin # into the machine and then pull another car into the stall beside you and put the probe into it's tail pipe. But with the new system its alittle harder. Its reads the Vin # and the sensor read...

Crew02

Well that is an open ended question. I live in North Carolina were 38 out of 100 counties currently have emissions testing. Last year North Carolina Upgraded their testing equipment. Now the equipment plugs into your data port and reads the Vin# and the data from the sensors on your engine. No more ...

Crew02

Yes, Thats correct. I can also disable my DRL by pushing my dome override switch. I found it out by mistake one day while working on something else.

S-10CREWCAB.NET

Search found 73 matches

Throttle Body

MSD 6A

TOWING

$80.00 Super Charger

Trans Mods

2001 Radio opening

Fender Flares

Factory Driving Light Upgrade

Tire and Wheel Questions

ARB Air Locker