S-10CREWCAB.NET

It was pretty difficult. I started out with the how to from this site. Basically I used the fenders as stencils and cut away any extra metal on the bed, marked and drilled the holes for the screws, and then drilled 1.5" holes in the wheel well of the bed to access where the fender screws would come ...

So I'm panning a big trip on some motorcycles and sadly need to get rid of the beast. I have put almost double into it of what I'm asking. It runs and rides perfectly and handles well compared to what I've heard from other big crew drivers.. It has been so much fun to build and use. It has everythin...

I have a later model plastic tank that has broken at the nozzle. I want to convert to a metal one and have been struggling to find info on the swap. What do I have to switch out to go with the steel or aluminum tanks? (Fuel pump, down spout, straps, sending unit, etc..??) Like this one: http://www.e...

Already traded it out, sorry

Finally got enough time and money together to order them off Sam's Offroad and they no longer have any. Does anyone know where I can get some? Or have an old pair to spare?

i believe the zr2 rear is 3" wider than the front. 1.5" on each side. I have 3" spacers on the front and 1.5" spacers on the zr2 axle and my tread width front and back is right at 77".

So I've been putting this truck together for a bit now, its been good to finally drive it around. I was gone this summer but now I have had time to get it mostly together so I thought I would post some pics. I'm not a great photographer so some of the pics have descriptions to help with what your lo...

Any tips on how to get the rear sway bar back on? Ive got the 8.5 axle, superlift shock brackets taking up space, 2" rear shackles, and the 10 bolt Moser diff cover. I have read how others have done it above or below, but they all were running smaller or no lift. The sway bar bottoms out on the cove...

if you have an old used set for cheaper than Sam's Offroad that would be fine, i live in 78749 Texas, i will pay shipping.

Please put into the main mod page that you have to make sure you have receptors for #6 and #18 fuses in your interior fusebox to complete this mod plug and play. I just did this entire mod, it didnt work, went to the fuses and #6 and #18 were missing, 2 amp fuses so I went and picked some up at the ...

So now I'm about to install the superlift 6", the PA bodylift 2" and a tbar crank (possibly blocks, shackles, or BSW kit on the rear if necessary) to see if its possible to fit 35" or larger tires on a 63" zr2 rear axle and 3" spacers up front.. I'm not afraid to trim the fenders, I'm just wondering...

I used to have a 03 crew zr5 with MML but had to sell it and I just came upon a nice crew for cheap so I'm back in the bunch! This time im going with a used superlift, tbar relocators, 33"s on stock wheels with spacers, and a zr2 rear end with G80 if I can find it.. So I've read different models cam...

So I went back to the local yard to pick up the axle I had careful left only attached by the drive-train, and the yard scrapped the truck! was over their 64 day limit they said.. anyway.. What other models of s10 have the 8.5 axle? are they as wide as the zr2 rear axle? since i'm planning the zr2 ax...

I was able to get a used superlift F.I.T. setup for cheap and I also have a line on a cheap zr2 rear axle. Has anyone combined these mods, or know if they will work together? The zr2 axle is cheaper than two 3" spacers..

I have one including chasis and inside light but the red lens is cracked around one of the exterior screws. The rest is in perfect shape. Except one bulb out of 3 (2 exterior nad 1 interior) is bad I think. PM if you are interested

Yes and they are black. The passenger side is in perfect condition but the driver's side is missing the mounting hardware.

Both seats are sold, I have edited the post to list what i still have

I have 3 plastic covers, but 2 of them are mounted on a brand new nerf bar that I'd like to sell complete. So I have 1 single plastic cover and one complete (drivers side) nerf bar for sale. I will sell these very cheap but you must pay shipping. PM me if you want to make a deal

I have one for sale. PM me

3rd Brake Light housing with seal. Comes with one bad bulb and cracked red lens. 1 bed rail with all mounting hardware. Drivers side step nerf bar with bolts. 4 plastic nerf bar step covers PIE GM12 Aux stereo adapter that only works if you have sirius or a disc changer. All dash vents. Lights switc...