S-10CREWCAB.NET

riceburnr2005

Put the fuel pump in a few weeks ago. Had some problems with the truck stalling for a little bit. Seemed to have worked out the bugs .

riceburnr2005

I always have the same problem when trying to fit new pads in the rear.

riceburnr2005

I have 31x10.5 on 15x7 with 4.5 backspace. when I was running just t-bar crank and shackles I would rub in the front when turning the wheel all the way. now that I have my body lift on everything is good. I don't think you could run 33's without the skidz flairs. Then I again I could be wrong.

riceburnr2005

Now that I got that sorted out. My fuel pump just died on me.

riceburnr2005

Well that wasnt the only problem. the wipers were running slow as well as the turn signals. Figured it out though. turns out I forgot to hook the ground strap back up on the firewall. all is good now!!

riceburnr2005

Took me 9 hours. But now I have a problem. now my drivers side window doesnt work. Wtf?

riceburnr2005

I contacted rough country about this. Their response was that the torsion bar crossmember is different on the crew cab than the others. They didnt design brackets to fit the crew I suppose.

riceburnr2005

Looks great!!

Sent from my iPhone using Tapatalk

riceburnr2005

Haha those are the same tires I should've read above.. I have the Black letters facing out instead of the white ones.. I love these tires

Sent from my iPhone using Tapatalk

riceburnr2005

Not bad I paid about 800 for my 31" Goodyear wrangler authority tires..

Sent from my iPhone using Tapatalk

riceburnr2005

I haven't heard great things about those flex fuel motors w/ cylinder deactivation. Lol I don't remember specifics so I guess I can't really prove myself.

Sent from my iPhone using Tapatalk

riceburnr2005

I would like to get my hands on a crew cab duramax!!

Sent from my iPhone using Tapatalk

riceburnr2005

Thanks guys

Sent from my iPhone using Tapatalk

riceburnr2005

Any experience with "helper" springs or those load leveling kits? I was thinking about turning the rear strut into a coil over or air bag and experiment with that..

Sent from my iPhone using Tapatalk

riceburnr2005

I already have 2" shackles in the back. If I added the bsw kit will it raise me another 2"? I don't need the additional height I just want the back of my truck to not sag so much when I'm pulling my trailer...

Sent from my iPhone using Tapatalk

riceburnr2005

If you don't mind me asking. What do people use those carpet beds for?

Sent from my iPhone using Tapatalk

riceburnr2005

What size bazooka did u get? What kind of amp?

Sent from my iPhone using Tapatalk

riceburnr2005

I also have the 2 door blazer rack. I have picks on here somewhere..

Sent from my iPhone using Tapatalk

riceburnr2005

I routed mine through the passenger fender through a hole that's behind the glove box against the a pillar. Kinda hard to describe lol..

Sent from my iPhone using Tapatalk

riceburnr2005

Doesn't the SE have the stiffer suspension compared to other trims? Im pretty sure it has a sport tuned suspension. Not going to be as smooth as other models. Are there low profile tires? Thin wall tires naturally have a firmer ride, combined with over inflation this could be worse. Either way I thi...

riceburnr2005

Sounds good.. Not a big fan of hard covers myself, but I use the bed frequently for my motorcycle and other things.. Good luck!!

Sent from my iPhone using Tapatalk

riceburnr2005

Got mine a truck cover..

riceburnr2005

Looks good!! What do you have in mind for upgrades??

riceburnr2005

I will!! And no worries, we have a good eye on everything over here...

riceburnr2005

Hey guys I hope everyone gets to spend time with their families during this special time of year, and dont forget to have a happy new year!!

riceburnr2005

Welcome!! Ask away if you have questions!!

Sent from my iPhone using Tapatalk

riceburnr2005

I'm guessing everything on the front suspension...at least that's how mine was..

Sent from my iPhone using Tapatalk

riceburnr2005

theres a guy over on s10 extremist who says he has one installed, he wrote a short description on the kit, sounds like there's still a couple kinks in the kit hopefully rough country will work these out..im considering purchasing one when i get back to the states. http://www.s10extremist.org/forums/...

riceburnr2005

Hey guys I was looking around and noticed that rough country redesigned their lift for the crews. now they include diff drop brackets with the kit to help with the cv angles. perhaps this kit might be looking in to now..what do you think?

riceburnr2005

looks good to me, will it fit?

riceburnr2005

Happy thanksgiving from Japan guys!! I hope everyone back home enjoys time with their families. My wife and I wish you the greatest we miss our families very much...

Sent from my iPhone using Tapatalk

riceburnr2005

Example of the trucks that are driven here. 600cc of pure fury. And it's 4wd!! Of course there are bigger ones but this is the most popular.

riceburnr2005

remember if you're ball joints have never been replaced on your rig, the factory ones are riveted in. so if you do them yourself be ready to drill the old ones out, for some not so painful. But i've seen some of my friends spend hours on this. I didn't do mine personally because i had to be on the r...

riceburnr2005

Ball joints!! Worn ball joints can cause sloppy steering and mess up you're allignment. I know this cuz my truck did the same thing. You have too much positive camber causing wear on the outside of the tire. Get those lower ball joints replaced and when you get new tires you need an allignment ASAP!...

riceburnr2005

I agree water can do some weird things. I had my crew up over the hood in water once, lights started going off on the dash, but after a couple days it was back to normal.

riceburnr2005

haha nice name...

riceburnr2005

I had to leave my GSXR back home, can't wait to ride it again...

riceburnr2005

Hey guys!! Just moved to Japan a couple months ago, you should see some of the trucks out here they're Different to say the least. I miss my cc it's stored at my parents hous it will be there for the next three years.. So sad... I'm still hanging around the forums though I'm gonna spend the next thr...

riceburnr2005

that's what we're here for!!

riceburnr2005

maybe whatever was in you're precat fell back into the main??

riceburnr2005

congrats on the install, ive had my BL sitting in the box on the garage floor for months now..maybe one day i will put it on...

riceburnr2005

could be any number of things, my creaky noise turned out to be my passenger side lower ball joint

riceburnr2005

riceburnr2005

Had that problem with my last car, i went with the wet sanding way. First time i had ever did it, but turned out great!! plenty of videos on youtube to show you how to do it. paint looked like glass afterwards..

riceburnr2005

+ 1 I've always gone with a nice A/T with decent siping in the tread. Never had any problems, even driving on solid ice. Adjusting tire pressure accordingly has been helpful to me as well...

riceburnr2005 · Re: 31/10.50/15's, spacers and body lift help! +1

riceburnr2005

I got the PA 2" BL. i got it for 260 but seems to be the kit that most of us run on our crew cabs. keep in mind that you're prolly wanna get gap guards as well for the fenderwells. Performance accessories also sells these. Look around on these forums you'll find what you need.

riceburnr2005

I did all of those steering felt great afterwards

riceburnr2005

riceburnr2005

I will look for this

riceburnr2005

Nevermind about the rattling noise found that one of the welds on one of the cats had cracked so the heat shield was loose...

riceburnr2005

Abs light came on the other day and then it turned off and then back on for a while and then back off. Seems to be random and sometimes will flicker when I hit a big bump. Could this be a loose connection or sensor somewhere? Also noticing a leak that looks like brake fluid but my fluid level is not...

riceburnr2005

Thanks alot I appreciate it and your welcome...

riceburnr2005

Most defenitaly

riceburnr2005

Oh yea i forgot all about the bsw kit. I agree that would do u good

riceburnr2005

Oh and i dont have a sway bar in the rear.

riceburnr2005

All depends on what your gonna be towing. I have 2" shackles and i can put my motorcycle in the bed and pull a trailer with 2 atv's at the same time and have no problems.

riceburnr2005

Ls1 swap!!!

riceburnr2005

Update on lower ball joints... greasing seems to be just a bandiad to keep quiet . Real fix may need to be replacing them. feeling loose front end and clunk here and there when turning. Thanks for that info f9k9 Yea i had to replace mine when the alignment shop said the lower ball joints were the c...

riceburnr2005

lower ball joints were the culprit on my truck too.. after i had already dumped money into replacing everything else..oh well at least my suspension is almost all brand new.

riceburnr2005

well this was the last time i hit up 77 for the next three years. Im jumping on a plane to be stationed in japan on the 24th. Im putting the crew cab and my other toys in storage sad to say...

riceburnr2005

Guess i will have to look into that. Update on the tires i recently drove from north carolina up to cleveland ohio and the tires were nice. Just a little road noise not too much handle nicely in the wet going up the 77 turnpike. Have about 5000 miles on em so far still look new. Now if i could find ...

riceburnr2005

My front tires actually rub towards the rear of the fender closer to the front doors. i never have a problem with the tires contacting top center. All the tires stick out from the fenders about an inch or two. the two inch spacers i put in the rear made them even with the front. Hopefully the BL wil...

riceburnr2005

if i put the body lift on then i souldnt have to beat the front fenders then? yea look up the marvelous mystery lift on here. with his combination 31 will be as big as you can go although there are some that manage 33's with fender cuts. I have a body lift ive just been too lazy to put it on, thats...

riceburnr2005

The tires and wheels look good. I was wondering what the offset and backspacing on the wheels are. I am thinking about getting a set for my CC, because my ZR5 wheels are starting to peel. sorry took me so long to answer, these wheels have a 4in backspace and 0 offset on them. at least that's what t...

riceburnr2005

i clear 31's with cranked tb's and 2" shackles. Of course i had to massage the front fender a little bit.

riceburnr2005

so since i bought my truck ive been trying to figure out the squeaking coming from the front passenger side. I came on here and read up on it and started lubing everything. Torsion bar sockets, grease points...no fix then i replaced all the shocks since the front ones were leaking all kinds of oil. ...

riceburnr2005

guess i got luck with mine they just fell out...

riceburnr2005

lol i wouldve been interested back in Oct. I got new wheels and tires now haha.

riceburnr2005

Thanks for the advice i will be sure to check the local laws. they are the common N90 wheels.

riceburnr2005

They are just tge factory rims with goodyear wranlers

riceburnr2005

Anyone have any ideas what i should do with my old wheels and tires? I really dont have any room for them. I maybe i should sell them?

riceburnr2005

Noticed some rubbing today guess ill have to do some more trimming...

riceburnr2005

Here's my little review on the tires. they have a nice little roar going down the road. Not enough to be annoying but noticeable. Ran em through sum mud after the rain we had a couple days ago and i have no complaints. They look pretty bad ass, ive gotten tons of compliments already. So far i'd reco...

riceburnr2005

Got everything put on except the body lift will post pics soon...

Search found 179 matches