S-10CREWCAB.NET

I have a set of ZR 5 bed rails for sale for $50 plus shipping. If interested send me a pm.

I recently acquired a Raider bed topper from another member and have no use for the rails.

I know this is several years later but I wanted to provide some additional thoughts on the oil line leaks. In the last 5 years I have gone through 3 dorman lines. Yes they have a lifetime warranty and rock auto even helped me get reimbursed for the labor. But the lines leak after 1.5 yrs, like clock...

Thanks Brule, good to know, looking for a little more security...

Also looking for a camper shell for the crew, any others out there for sale?

Your discount code is:

1456841211852030

This discount code expires on June 23, 2013; so don't wait!

Received the 1.25" spacers from rigged.up (ebay vendor) and they are just as described. 6.45" OD, Grade 8 hardware, very good finish and appears to be a quality product. I was able to install them with no problems. The price was $120 but that was for 4. The price for 2 was the same as for 4 so I fig...

ezaccessory (ebay vendor) just confirmed they are using 6" OD Stock and Grade 8 studs. riggedup (ebay vendor) just confirmed 6.45" OD stock with 12 mm x 1.5" grade 8 studs. Sounds like this may be a good possibility in the $120 (per pair) price range. These appear to be the same quality as some of t...

Spacer/adapter vendor update: Completevalue (ebay) confirmed with Dwight that he only has spacers that are 6.125" in diameter. After having test fit a set, I feel they are too small for the stock wheels. Perhaps if you are using aftermarket wheels with a smaller mounting face, they may work. CJBargi...

I just received the 1.25" spacers from completevalue and they are no longeg using 6.5" diameter stock. Mine measured at 6.125" and are definitely smaller than the mounting surface of the wheel. I will be trying to send them back within the next day or so if I can get them to refund my money. I am no...

I have a 7.625 rear end carrier for sale. I replaced it with an Eaton gov-loc and have no use for it. I has 70k miles on it and does NOT include the gears. PM me with an offer if you are interested.

Just a reminder that this is a very important, worthwhile and cheap mod. YellowCrewCabber has found an excellent location to run the vent line. I recently relocated mine on a newly purchased truck and decided to go ahead and change the fluid out just in case. Very glad I did as there was serious wat...

Original SES codes were P0171 anbd P0174 code (Bank 1 and Bank 2 system too lean). Solution was the dealer found a leaking vac line. I guess the vac system is tied to absolutely everything and should always be the first thing to check!

Thanks for all the help.

Very timely discussion. I performed the throttle blade mod 150 miles ago and my 03 CC threw a P0171 anbd P0174 code (Bank 1 and Bank 2 system too lean). Do you think they are the result of the mod?

Do you still have the G80 available?

I am a site newbie and wish I would have found it sooner!
I just sold my 91 s-10 with bushwacker cut outs, 2" BL after 15 yrs and 208k miles and bought a 2003 ZR5. Unfortunately, the truck has 3.42 gears and no G80. Can the G80 be added to the stock 3.42 rear setup without a hitch?