S-10CREWCAB.NET

Jongo88

I have 2.5 inch spacers on the back.. I bet that will give them a work out...

Jongo88

Oh man... You have me scared now.. Both my axle shafts are from Napa....

Jongo88

I just replace my front end parts one time... I stay away from the cheep store bought stuff. Just get the stuff that will be free from defects in materials and workmanship for a period of 1,000,000 (one million) miles. My old Blazer has 200,000 on the ball joints and are still like new. My Crew has ...

Jongo88

Well after going back five times for balancing I made them give money back... I don't care how you try to balance a tire you can't balance an egg shaped tire. I now have Nitto tires. They are round and have little weights on them. They ride sooo good. I went with 265 70 16's. I put on the Trans Am r...

Jongo88

Nice looking truck... Welcome to the site...

Jongo88

That sounds good... So you won't have to lock it up or down??

Jongo88

What??? No ZR5 wheels???

Jongo88

Now that looks good!!!!!

Jongo88

You will like this site. There is a ton of info here and everyone is willing to help you in a nice grown up way...

Jongo88

Welcome to the site... And that is a very clean truck!!! I seen it on the other site too..lol

Jongo88

I just looked to see how old mine are... There 12, 8 and 7 years old. The two yellow tops in my boat are 6 years old..
I guess I found the only good ones they had...

Jongo88

I'm sorry to hear about your problems with the red top..
I have three of them in my s10's. One is 9 years old and the other two are at least 6 years old... I never had any go bad ( yet...).... lol

Jongo88

X2.. I looked and looked...

Jongo88

_STUCKY wrote:That's what I figured. Just wanted to check before I cut up a good mat. Thanks.

Oh and thanks for the pictures in the MML thread. Much appreciated. I'm a visual learner.

I'm that way too... See a mud hole drive into mud hole. Get stuck and swim out and look to see that I'm stuck.
lol But true...

Jongo88

Sven wrote:Awesome. I would like to get a ZR2.

I found one:
2000 s10 zr2 8.6" 10 bolt 3.73s and posi with discs

So this will be a bolt in replacement for my 2003 s10 zr5 4x4 with a 7.625 rear with discs? If so I am very excited!

It looks to be a 2000....

Jongo88

The big thing with me is there is no way a full size truck can go where my little crew can go. Most of the trees are to low and all the trails are to thin. My truck it the perfect size. The best thing would be a Jeep. But my crew does just fine.

Jongo88

Jongo88

That is sooo true but no payments sound good too...

Jongo88

I'm a diehard too. I'm keeping mine until it's dead...

Jongo88

I just have a milk crate bungeed in a corner. It has a small floor jack some tools a 4 way and a snatch strap in it.
I need all the other room to haul gas cans to my boat. Just took 60 gallons up there last week...

Jongo88

They are a Walmart exclusive tire... I had no problem getting them to install them. I get a discount at Walmart so it's hard to beet there price.
I got them with lifetime balance rotating and road hazard new valve stems out the door for just under 600.

Jongo88

They are Wrangler Authority's... 31/10.50/15's. I'm not happy yet. I have one that is out of round and one that wobbles side to side... I know it's not my rims as my old tires rode smooth. I will take it back next week to see what they are going to do...

Jongo88

Thanks mike.. And the best part is it rides better with the spacers... Who would of thought...

Jongo88

Just about everything done is in my sig...

Jongo88

My first pictures on this site...lol

Jongo88

Jongo88

I seen that all the way from Florida... lol

Jongo88

I have a very nice box.. But shipping would be killer....

Jongo88

I would drive 200 miles to get them...

Jongo88

Lol... I have a black GMC and I replaced my grill with a black one.. I like it all blacked out...
One of these days I will learn how to post pictures on this site....

Jongo88

It looks good though. I like it black!!!!

Jongo88

Your headlights have a gap at the bottom and stick up higher than the grill...

Jongo88

Your grille looks sooo much better.. But is your head lights in right??? They look like the bottom is not in the holes...

Jongo88

That is a good deal...

Jongo88

I like them...

Jongo88

What light are you using for that??? Will that fit in an s10???

Jongo88

Hows the thumb??? That hurts just looking at it...

Jongo88

Well don't that bite the big one...

Jongo88

I wonder when the time comes that my over size radiator tanks crack if I could just get the tanks replaced???

Jongo88

Did you just look on his site?? I had to call him when I bought mine...
You don't want the Vette radiator as it has the wrong size hoses...

Jongo88

You mite want to check out JTR... I don't know if he still has them but thats where I got mine... It mite be worth a check.

Jongo88

Thank you Brule for the seat covers... I gots them today and they are 100% better than what I have now....

Jongo88

Me too!!! Once I remembered my user name I had no problem... Then I remembered I had you change it to what it is now so it's the same as my other site... lol. I guess thats the first thing to go.... I'm knocking on 50's door...

Jongo88

Well??? do you have the BL on yet????

Jongo88

Jongo88

I wish you the best of luck but I had to replace all the vaccume pods. Once they see trans fulid it's just a mater of time...

Jongo88

I seen two of them in the junk yard today...

Jongo88

Vista and mcAfee security..

Jongo88

I can't get that to work eather...

Jongo88

Thanks... Let me try it..

Jongo88

I can not get a piture small enough for an avatar. I use my avatar on another forum without any problems but it won't work here.

Jongo88

Good luck.. I gave up..

Jongo88

To bad you are to far away and they have tires....
Welcome to the site...

Jongo88

Mine is right behind the pass side taillight... That is from this site.

Jongo88

Do a 1.5 inch T-bar tweek then get a front end alinement.

Jongo88

PPM is all I run. I had my first set in my old Blazer and they are still good after 200,000 miles. It now has 280,000 on the clock. I have them in my crew now and have about 40,000 on them and still going.

Jongo88

MML FTW!!!!!

Jongo88

The ZR5 package will carry an MSRP of $1,500 and includes a roof rack, wheel flares, black anodized bed rails and side steps, 15" X 7" cast aluminum, five-spoke wheels with spectra gray accents, 235/75R-15 ???
I thought the zr5 wheels were 16 inch?
Did I think wrong??

Jongo88

I think it helped mine. It is not working as hard as the stock one. I could hear and feel the stock one when the e fans kicked on. I don't have the problem any more...

Jongo88

Thanks guys. I found this too. http://i165.photobucket.com/albums/u70/ ... ck4327.jpg
What do you think about this??

Jongo88

I have been looking and looking and just can't find the anwser..
I have a K&N cold are intake that I picked up. It says it will not work with a body lift.
Is anyone running the K&N with a bodylift?
If you are what did you have to do to make it work?
Thanks

Jongo88

Here is what it looks like. http://www.google.com/imgres?imgurl=http://images.wrenchead.com/smartpages/partinfo_resize/DUS/15-5643.jpg&imgrefurl=http://www.bestvalueautoparts.com/Replacement_Parts/CHEVROLET/BLAZER_S10_T10/A_C_Compressor.html&usg=__EN7TkxDhttAWsG0IQnG4b93msDE=&h=225&w=274&sz=17&hl=en...

Jongo88

It is most likely the low pressure switch. Some call it a cycle switch. It is on your accumulator tank. There is a shrader valve under the switch so when you change it you won't loose your freon.

This is a very common problem and a very easy fix.

Jongo88

Any time bud. I'm just glad I can help. If you where close to me I could realy help. Now that I have done it, it would not be to bad. The hard part is getting the bolt started with the wire harness in the way. Just make sure you torque it to specks. I don't remember what the torque is. It mite be 20...

Jongo88

It is directly under the fuel lines. Once you pull the distributer you will see it. I could not see it myself untill I pulled it. I looked and looked and was stumped too.

Jongo88

They are easy. You have one bolt in the back and one nut in the front on the injector. They have rubber hoses in the back so you can move them to the side to get to the sensor...

Jongo88

That would be very hard to get as you can't even see it..

Jongo88

I hope you have small hands unlike me....

Jongo88

It's in the back of the block behind the intake under the distributor. You have to pull the distributor and the fuel lines to get to it. Even then it is a BIG PITA to get to. The main thing is to make sure you torque it to speck This is what it looks like. http://www.google.com/imgres?imgurl=http://...

Jongo88

That is soooo cute... I have never seen one that small. Not makin fun but he is cool.

Jongo88

I went through the knock sensor thing. I just took a chance and changed it. PITA by the way.... That code never came back.

Jongo88

I am so glad it worked out for you. Just think??? You got up to 207? That is way better than stock. On a good day at 70 mph stock wouild be at 210. You were sitting for an hour. Dam that's good!!!!

Jongo88

I made mine. They are very easy to make. And the best part is the price. FREE...

Jongo88

X2... It works for me....

Jongo88

I just got one today...

Search found 374 matches