S-10CREWCAB.NET

I do think it was the ground all along. Why do I say that well as I posted before when the truck would not start the driver side window would not roll down just the driver side window all the others were fine.and it only happened when the pump would not work and the truck would not start. I don't kn...

It was the ground wire i ran a brand new power wire with no luck then today
I ran a new ground wire and BAM!!! it worked thanks for all the help.

I after checking for power to the pump with a test light I got nothing so today I ran a new wire from the fuse box to the pump checked for power and nothing I spliced into the old gray wire right before the pin so i took out the wire and placed it on the ecm2 fuse and i had power at the pump but sti...

is there more than one fuse? if so would they be in the main box under the hood or next to the driver side door? I pull the big relay out there are four or five of the same ones in the box under the hood that are used for different things I swapped out two of them the horn and the pump relay as it s...

well went to car quest today and bought a new delphi pump connected it with the right wires this time came with way better directions but still not firing Im going to check the connections with a test light and im going to check fuel pressure. I checked for fire at the coil and it was good I then ch...

I did not buy my pump from auto zone I went to see if they had a digram of the wiring for the new connections on the pump that came up empty they pulled out one of there pumps and it had the same directions as the one I have. I bought mine from ebay it said it was a delfi but i could not find any ma...

What was your color wires maybe i can figure out why its not working.

The truck ran perfect until i took out the old pump and place the new pump in. it runs like its trying to set it self its running real lean or rich it has never smoked before and now its smoking real bad and running rough when it will stay running at all. the wires on the truck are purple, black,bla...

I tried all the combos and nothing still running rough and smoking so back to the old one.

Well if there was anyone on here that was going to know what it was that would have been the Jedi s-10 Master. Thanks HJ you are the master.

put in the new fuel pump today and with the crappy directions it came with a new connector does any one have a diagram of the color code. I hook mine up and its barley running now.!!! there is a gray wire,two black wires, one white wire. the connector that was on the truck had a purple wire,black wi...

The mileage is around 110,000 its a daily driver to and from work round trip is 20 miles. Although I have been to Baghdad twice I don't live there I live in south east Texas 90 mile from Houston. Really only sits when I'm at work or at home work could range from 8 hours to 16 hours, home could be tw...

It was last summer I installed a new fuel filter on it and bought the little tool that doesn't work to take the plastic off. I did that along with the whole tune up project. fuel filter, plugs, wires, rotor, and a cap. This past summer I put in a new water pump and radiator the radiator had gotten a...

The driver side window works all the time unless the truck doesn't want to start.. That's why I was wondering if they might be connected some how. and I have read pretty much everything there is about the fuel pumps not working and getting the high dollar one....The reason for my first post was to s...

my crew cab has personal issue's this is what I have figured out so far and its kinds weird when I try and start it and it doesn't start the driver side window will not roll down all of the others will. Of course I do not here the loud as hell fuel pump when I leave the key on. The whole approximate...

years 94 to 04 that should help in finding some seats...sweet thanks

Does any one know where to find a 60-40 bench seat that will fit our crew cabs?. I have looked with no results.

Henryj for the socket info I couldn't find a deep socket in 1 7/16 so i got a 36mm $16.99 and thanks 04 crew for the breaker bar suggestion it really came in handy the nut was a beast to get off..well took it for a little drive and no more grinding and wheel wobble :D ....while i was there I went ah...

ok my front driver side bearings are now shot any one know what size the retaining nut is I know its bigger than 1 7/8 and its gonna be metric.I plan on changing it out in the morning but will have to go to auto zone to get the right size socket. and yes i did use the search button first....

I have had that problem for a little while now but you can hear my fuel pump in the driver seat its pretty loud..buzz that is.... I can tell when im getting low on fuel because its gets really loud...the other day I took off the air intake off the carb and it started right up...does it seem that it ...