PA body lift price

bwenny247 · Post by **bwenny247** » Sat Mar 12, 2005 8:06 pm

Hey i was cruising around looking for various prices on the PA192 body lift and i came across these guys, their price was the lowest.

http://www.performancelifts.com/cgi-bin ... ER192.html

$179 for the kit. I can't attest to their reputation but they might be worth looking into.

F9K9 · Post by **F9K9** » Sun Mar 13, 2005 3:39 am

I got my bilstiens and daystars from them. Somehow, my order was doubled (my fault) and they corrected upon receiving the stuff back from me.

Which reminds me, I had the stuff shipped to work under the wife's radar. I work with the marshal service based in a federal courthouse. Before I shipped the second set back, a coworker who knew I was bent over the double order put the second order through the xray machine the following morning just as I pulled in the lot. He knew I'd see the image when I would walk by the machine. Well, I did and I went ballistic thinking it was a third set arriving at work.

Am still planning an appropriate "payback"

F9K9 · Post by **F9K9** » Sun Mar 13, 2005 3:52 am

I just checked the site and they were over $214.

top_sgt · Post by **top_sgt** » Sun Mar 13, 2005 6:02 am

i ordered reeds lift from performance lifts last week......179 plus shipping.......total was 202!! waiting for this package to arrive!!

killian96ss · Post by **killian96ss** » Mon Mar 14, 2005 9:15 am

Summit Racing part # PRA-PA-192 $174.95

Steve

SomeCrew · Post by **SomeCrew** » Mon Mar 14, 2005 9:20 am

Got mine from a local performance shop. Cost was $250 installed.

killian96ss · Post by **killian96ss** » Mon Mar 14, 2005 9:31 am

SomeCrew wrote:Got mine from a local performance shop. Cost was $250 installed.

That's a good price installed since it takes all day to do it by yourself.

I would have paid an extra $70 so I could have the day off.

Steve

SomeCrew · Post by **SomeCrew** » Mon Mar 14, 2005 9:39 am

They did a good install job and all....but somehow my plastic stock skid plate for the front ended up "missing"

camelott112 · Post by **camelott112** » Mon Mar 14, 2005 12:20 pm

did mine alone in just under 9 hours well about 8.5 to be exact but the bed got tricky luckily i already had my 31's on there and i just used 2x6's and stood the bed on the tires

bwenny247 · Post by **bwenny247** » Mon Mar 14, 2005 5:53 pm

cheapest right now is still performance lits at $179

summit's up to $197 now. just like: 4wheelparts, rocky mountain suspensions, suspension connection, and rough country

4wheel supply is $192

ultimate accessories and offroad warehouse are $220

killian96ss · Post by **killian96ss** » Mon Mar 14, 2005 6:17 pm

SomeCrew wrote:They did a good install job and all....but somehow my plastic stock skid plate for the front ended up "missing"

I hope they eventually found it. It's not a very small part, so I doubt it got swept up and thrown away.

Steve

SomeCrew · Post by **SomeCrew** » Mon Mar 14, 2005 6:19 pm

Oh no no no, never found... grew legs.

jeggers · Post by **jeggers** » Mon Mar 14, 2005 7:53 pm

If it can grow legs you dont want it on your truck!!!!!

jeggers · Post by **jeggers** » Mon Mar 14, 2005 7:57 pm

ya i paid 192 in dec. from summit and in 2002 i paid about 130, i think

AZS10Crew · Post by **AZS10Crew** » Mon Mar 14, 2005 8:04 pm

Summit has it for $197+shipping as of 10:30 PM on Monday.

jeggers · Post by **jeggers** » Mon Mar 14, 2005 8:09 pm

AZS10Crew , where at in IN are you.
That kit is getting real popular supply and demand

bwenny247 · Post by **bwenny247** » Tue Mar 15, 2005 12:58 pm

called up 4wheelparts and told them about performance lifts price ($179), they went down to $173, add $17 shipping and i'm at $190 to my doorstep.....they also threw in the 2 year subscription to the Offroad Advantures Magazine.

only downside......had to wait 25 minutes on hold

lol

hopefully I'll have it on by Easter

killian96ss · Post by **killian96ss** » Tue Mar 15, 2005 4:25 pm

bwenny247 wrote:hopefully I'll have it on by Easter

My only complaint about 4 Wheel Parts is that they ship slow. I have ordered from them a few times and it took weeks to get my parts.

Maybe I live far from their main dist. center? Hopefully they will do a better job for you. BTW 4 Wheel Parts guarantees they will beat anyones price on any advertised part.

Steve

AZS10Crew · Post by **AZS10Crew** » Tue Mar 15, 2005 6:40 pm

jeggers wrote: AZS10Crew , where at in IN are you.

Carmel, IN right now...but Plymouth, IN in about a month or so.

F9K9 · Post by **F9K9** » Tue Mar 15, 2005 7:17 pm

AZS10Crew wrote:
jeggers wrote: AZS10Crew , where at in IN are you.
Carmel, IN right now...but Plymouth, IN in about a month or so.

That's a big jump. in state wise! Drove through both many times enroute to Elkhart. Why the move?

jeggers · Post by **jeggers** » Wed Mar 16, 2005 7:44 am

I am from hammond myself

AZS10Crew · Post by **AZS10Crew** » Wed Mar 16, 2005 7:37 pm

f9k9 wrote:
AZS10Crew wrote:
jeggers wrote: AZS10Crew , where at in IN are you.
Carmel, IN right now...but Plymouth, IN in about a month or so.
That's a big jump. in state wise! Drove through both many times enroute to Elkhart. Why the move?

My wife just got a State Farm agency in Plymouth. That's what moved us here from AZ last year...but that was just a trainee position. Now she'll be a full-fleged agent...one of two in the town and the other one will probably be retiring in about 5 years, so it was a gig we just couldn't pass up.

AZS10Crew · Post by **AZS10Crew** » Wed Mar 16, 2005 7:38 pm

jeggers wrote:I am from hammond myself

I've been through there once or twice. I'm from Logansport originally. You're south of Chicago now right? That's not too far away...we'll have to meet up sometime.

jeggers · Post by **jeggers** » Thu Mar 17, 2005 9:08 am

After i get some work done on the cc i would like to take it and some more cerws to the badlands and do some mild weeling(realy dont want to roll my new truck only 7000k)

AZS10Crew · Post by **AZS10Crew** » Sat Mar 19, 2005 5:01 am

jeggers wrote:After i get some work done on the cc i would like to take it and some more cerws to the badlands and do some mild weeling(realy dont want to roll my new truck only 7000k)

Once the warm weather comes back, we'll see what we can do.

D68enny · Post by **D68enny** » Tue Mar 22, 2005 11:30 am

Does everybody with the body lift use the gap guards? Does it look ok without them?

killian96ss · Post by **killian96ss** » Tue Mar 22, 2005 11:42 am

D68enny wrote:Does everybody with the body lift use the gap guards? Does it look ok without them?

I have the Gap Guards, but after installing them I realized that I could have made them cheaper myself.

It doesn't look all that bad without them, but you can see straight through the bed and the engine compartment is more exposed to water and dirt.

Steve

D68enny · Post by **D68enny** » Tue Mar 22, 2005 11:51 am

Does everybody with the body lift use the gap guards? Does it look ok without them?

jeff024 · Post by **jeff024** » Tue Mar 22, 2005 12:13 pm

I have them if not you can see to the other side of the truck and I didnt like it

top_sgt · Post by **top_sgt** » Tue Mar 22, 2005 12:44 pm

i made some for the rear from rubber i got at homedepot!!!
a lot less than the price of gap guards!