Synergy Offroad

[Jigg]

I'm sure quite a few of you know about my new business, but I figured i'd make a proper thread for those who don't:

This summer I started a new company, Synergy Offroad. We started off with smaller custom made products, like delete plates and gap guards, and have since began carrying the Chris Knaffle line of products (sliders, shackles, and receiver tubes).

Well, we now carry thousands of new products, from winches, to lifts, to nitrous.

I'm working on a new shopping cart and credit card system, but for now the site is paypal driven. If you guys need anything, feel free to shoot me a PM and i'll give you the best price i can.

For a list of products, click here:

Synergy Offroad Product List


Oh yeah, for those of you who ride quads/dirtbikes/sleds etc... i'm working on a hookup for certain aftermarket accessories (powermadd, acerbis, stud boy, etc)

Moved this to Classifieds to make it easier to find for those shopping. -W

[Jigg]

For anyone that has a snowmobile/dirtbike/atv... I'm getting setup with an accessories dealer, should be ready to order before the new year.

[Jigg]

We now have a forum for people to ask questions and whatnot:

Synergy Offroad Forums

[LonestarZ]

Sweet... didnt realize just exactly how much stuff you offer.

[Jigg]

I think overall I have 40,000+ different products. That's between trucks, atv's, dirtbikes, and snowmobiles. Once I get the shop completely up and running, things will be a lot easier for people to order. (right now most people email me if they're looking to order something.)

[Jigg]

Update to the Synergy Offroad site:

The NEW Synergy Offroad

[gocntry]

Jigg,
Have You Started Carrying The Moog Problem Solver Ball Joints Yet??

[Jigg]

I have the Moog ball joints on the site right now. I can't find any information on what the specific part number is for the problem solvers (are there two different lines of Moog Ball Joints?)

Suspension and Steering

If the page doesn't load, hit refresh... i'm in the middle of working with my hosting company to get this glitch fixed.

[gocntry]

I have the Moog ball joints on the site right now. I can't find any information on what the specific part number is for the problem solvers (are there two different lines of Moog Ball Joints?)

Suspension and Steering

If the page doesn't load, hit refresh... i'm in the middle of working with my hosting company to get this glitch fixed.

The Part Numbers You List Are What I've Been told Are Considered The "Problem Solvers". Here Is The Moog PDF File If You Would Like To Use It Too.

http://www.moogproblemsolver.com/downlo ... SpnFr).pdf
That File Is From http://www.moogproblemsolver.com The Article # Is 27020

[Jigg]

Awesome, thanks for that PDF!


All kinds of new stuff today:

4wd Actuators
Oil cooler lines
Transfer Case Switches
Wiper Motor Circuit Boards
Door hinge pins
Moog chassis parts

Check it out here

[HenryJ]

Hey do you have access to Smittybuilt products?
I know you had a deal on some winches, but was not sure if you could get good pricing on other products?

I am interested in a price on this seat cover organizer: http://www.smittybilt.com/product/index/45.htm

Smittybilt G.E.A.R. Seat Covers

The Ultimate Storage solution for your off road vehicle! The G.E.A.R. seat cover is a completely new way of looking at storage for your off road needs. Each cover is manufactured from 600 Denier Polyester with a PVC liner and is completely adjustable. The Smittybilt G.E.A.R. Seat Cover comes with seven different pouches that securely fasten using a Molle/Pals Restraint System which will not come loose under the harshest off road condition. Its offered in three different colors: Black, Coyote Tan, and Olive Drab Green and its completely UV Stable. Smittybilt provides the best in G.E.A.R. for all your Off Road Needs.

Probably part number 5661001 for black. Or maybe 5661024 for tan.

[knaffie]

That's sweet. It would be nice to have a little bit less junk bouncing around in my back seat. Let me know on the price too Justin.

[Jigg]

Hey Guys,
Sorry for the late reply (i was on my honeymoon).

I can get them, looks like $99.95 ea.

Split seat cover topic to a thread of its own-HJ

[Jigg]

Hey guys... i've been working pretty extensively to get my powersports catalog up and running. Right now, it's all PDF format, as i'm still working on quite a bit of file cleaning to upload the individual products to my site, but... if you're looking for anything snowmobile, ATV, etc... here it is (mostly winter stuff right now, i'm working on the Trailer and Dirtbike/ATV sections):

Accessories
Body and Chassis
Boots and Accessories
Chemicals
Clothing and Accessories
Clutch
Controls
Drive
Electrical and Ignition
Engine
Front Suspension
Fuel and Intake
Gloves and Accessories
Go-Carts
Helmets and Accessories
Luggage
Mini-Sleds
Off-Road
Rear Suspension
Rewind
Snowblower Parts
Tools
Traction Products
Trailer and Towing
Index

[Jigg]

3" Quickfists {$9.95 ea}:



(click for link)

Quickfist XL {$24.95/ 2 pack}:



(click for link)

[Jigg]

HD S10 front suspension kit:

Power Performance Motorsports Suspension Kit

[Jigg]

[_STUCKY]

So how does one go about getting ahold of synergy offroad?

I called and all it does is ring once and then silence. Does jigg still get on here?

[HenryJ]

Haven't seen or heard from him in a long time.

What item are you looking for?

[_STUCKY]

I was wanting to order the winch mount:

http://shop.synergyoffroad.com/Synergy- ... hMount.htm

But I'm wanting to make sure it will work with the offroad direct axle swap:

http://www.offroaddirect.com/94-04-S10- ... _p_87.html

I assume the winch mount would bolt up between the frame and the front spring hanger, but I can't find good pictures of what I'm wanting to see for either one. I was lucky enough to win a smittybilt xrc8 in a raffle the other day. And I'm plotting a Dana 44/ 14 bolt. I've got almost everything but the sfa kit, winch mount, and astro box. But a winch wasn't in my plans until Saturday.

[HenryJ]

I may be wrong, but I think Chris made those mounts. I followed the whole thing when they prototyped them. Chris has moved far away now. The last few mounts sold years ago. He has gone on to a buggy for his offroading. I see him show up on TXZR2.com (Walt hosts this forum too ) once in a while.

If you are going SFA, build your own mount to work with that. That would be a much better idea.

Food for thought...I really like my receiver mount winch. Put your winch in a cradle. Use it on the back, add a front receiver, toss it in any rig and use jumper cables to power it on a buddies rig. Add a receiver to the front of your trailer and use it to drag the broken Jeep up on the trailer.

Ideas

[_STUCKY]

Yessir, he did.

http://www.zr2usa.com/mboard/index.php?showtopic=7502

As for the receiver mounted winch, I don't want to go that route since it would kill approach and departure angles.

Are you saying the winch mount isn't available anymore? If so, they should really take it off the site. However if it is still available, my concern to get the winch mount and the front leaf hangers to work together is that both are supposed to be bolt on. But with the winch mount between the frame and hangers, and the winch mount being 1/4 inch thick, I would guess that the holes for the side of the frame would be off 1/4 inch. Of course it could all just get welded together. I need to find out if the rear hangers from the axle swap kit are available separately, they look like they are well worth the money vs. time, and a front crossmember is easy enough to make.

I feel like I should start a thread but I'm not ready yet...

[HenryJ]

As for the receiver mounted winch, I don't want to go that route since it would kill approach and departure angles.

Not always true. I know of several including my truck where that is not true.

[_STUCKY]

Anyone know a coupon code to use on synergy's site?