S-10CREWCAB.NET

2bunik

:oops: PLEASE MAKE SURE YOU ARE connecting 87 and NOT 87A to your low beams.. 87A will cause your truck to act funny. same as you mentioned above. Also check your fuses. I had to change mine to 15s so it could quit blowing them.. then continue I had alot of trouble too when I instlled mine. .. This ...

2bunik

the LED one I wanted to get was plastic so it could be easier on the teeth. I think I will go on the path less traveld and get the LED one. I know every one has a maglight here .. so If I test the led one..I will at least give some feed back on whether people should upgrade.. I will take it to work ...

2bunik

they are supposed to be interior lights but .. I feel it will be nice and bright in the bed. I plan to mount it on the inside of the bed on the drivers side.. for two reasons. one I wont hit it with anything i slam into the bed.. and two it is kinda protected from the rain... I am gonna drill into t...

2bunik

I know this is a big question in life. what flashlight worxs best. .. This is the deal.. I really like maglights. 1 cause they take a beating 2 cause we use them at work. but I went to buy a flashlight and could see myself buying a 18.00 maglight. Then I saw these LED flashlights. they are smaller a...

2bunik

:) I picked this up last night at the store. http://store4.yimg.com/I/rodi_1766_11595968 ..I was gonna install it today but it rained. I am gonna put it in the bed to help out when unloading at night, it will also help see in the bed when I get my tonnaue cover.. I was thinking about the cheap mods ...

2bunik

I didnt know the plug was there..

I bet dillons on 47th has it huh?

2bunik

I got a question on this.. ok I was thinking if I install one. I was gonna run a bulb with an inline fuse straight to the battery.. then a ground to a push ground switch and bolt it on the fender... =The switch is just a plastic nipple with a ground and a spring.. so when the hood is down the switch...

2bunik

I was upset when I got my crew and poped the hood. to find out there was no light.. a 26000 dollar truck and no light..

2bunik

I can get my clips from work...

2bunik

I would like a two cell mag light just behind the center console/ arm rest thing ... so even if you have two people in the back seat .. it will be right in the middle of them two.. actually I think that is what Im gonna hit up doing this weekend. today is PAY DAY...lol Im also gonna install the bed ...

2bunik

http://smileys.smileycentral.com/cat/15/15_4_101.gif you can cut the grill between the chrome and replace it with streched metal sold at lowes for a buck.....I did it for my 95 mustang but havent tried it on the good ol' truck yet. but it can be done.. http://smileys.smileycentral.com/cat/10/10_1_2...

2bunik

oh and you have to roll the windows. down....J/k it got me too the first day I had it.

2bunik

I must have missed something .. What brand lift kit is that oh and size?

2bunik

http://smileys.smileycentral.com/cat/4/4_1_2.gif http://smileys.smileycentral.com/cat/4/4_1_2.gif http://smileys.smileycentral.com/cat/10/10_1_20.gif http://smileys.smileycentral.com/cat/10/10_1_15.gif oh yeah I got the mod. Im gonna test out how it looks at night .. I cant wait till I go to work.....

2bunik

no I have been so burned out on taking that headlight off and messing with it I havent tried it again . but after i get done reading these new posts I ll get back out there...

2bunik

I see it now ....

....

2bunik

Thats cool.. We really appreciate you taking the time for all of us to have a place to gather .. just a bump in the road for me :wink: ... and the longest relay install I have ever done.. :lol: :lol: but tomorrow is a new day and my fortune cookie said " the light is bright and you will reach it" ma...

2bunik

I tried doing this mod myself but had a little trouble with it on the relay instalation. I spliced into the all the wires like the diagram showed but my drivers side light wouldnt work for some reason.. :? so ill try again tomorrow. I dont understand the whole negative posative thing.. but then agai...

2bunik

sorry thats portaguese for truck ....

I'm bilingual

2bunik

ok I went back out to the ruck and .. you were right..

I get quads with the DRLS.. that suks. ok now im gonna go get a relay.. .. Sorry for the bad info...

2bunik

yeah my lights turn on on there own so i must have AHL but everything works fine on my truck .. just lows on DRL then the AHL kicks in low beams too .. as soon as i hit the highs I get quads. :? Ill check it again. since last night I was tricking the sensor with a lamp. But I dont think I need this ...

2bunik

i can see the pic?

2bunik

:o no relay I just ground the yellow wire out and boy did them lights shine. I also did the air box mod while I was at it. I am very satisfied with both .. 8) On the head light mod I still dont understand what the whole relay thing is about .. some one please reply on what the whole relay purpose is...

2bunik

:( mine is an 03 gmc I have a plug in the ashtray and an accesory one underneth. total of two. unless you guys know of another. my radar detector works good and so does my cell phone charger on both of them but as soon as the lighter goes in the fuse goes. :twisted: I think im gonna look for a wreck...

2bunik

I bought a cigarette light for my truck and i stuck it in what i though was the ciarette lighter hole :lol: but it blew my fuse. so i bought a differant one and that did the same. I even borrowed my buddies and same thing.. does any one have a darn cigarette lighter in there trucks. if so where did ...

2bunik

I just found the quad beam mod and even after all the explaining I still had about two questions left. do daytime running lights still run normally? all that changes is when i hit the high beams I get all four as oposed to two right? :oops: How is everyone truck who has done this mod?any problems ? ...

2bunik

:roll: I know we have a fuel filter cause all cars do. also your air filter of course. oil filter. and a transmission filter usaully. this is just based on my knowledge of cars. however i dont know on a crew where there are. oh and dont forget the blinker fluid filter. :lol: j/k sorry I could be muc...

2bunik

I am planning on doing 5% on the rear and rear doors. and just keeping the front two 25% :lol: . I know it might be illegal but we dont have cops here anyways. I have been here three years and I could count how many cops ive seen drivng around. (unless there was an accident or what not.) so I really...

2bunik

:o I know some of you out there are looking for tint to match the rear windows stock stuf. I searched and couldnt find anything so here I go. I went to wallymart or better known as walmart and found some stuff that matches to the tee. Let me tell you I am SAT IS FIED. i SPENT 20 BUCKS for two rolls ...

2bunik

:cry: ALRIGHT I know everyone one has there own way to modify a truck.So first I decided to spark up the interior with this wonderful gague bezel. http://images.channeladvisor.com/Sell/SSProfiles/30055854/Images/075-CHR-1.jpg sounds simple enough. that is till i was sitting on the floor next to my e...

2bunik

Is it possible to lift the crew some inches with a set of bigger springs and shocks in the front and leafs and shackles in the rear. just a question..... if not .. please explain why not. I know when u lower a car you get smaller springs and new shocks. and was just wondering if it was backwards on ...

2bunik

I have a gmc crew and the foglight switch is just under the headlight switch. when I drive at night and turn my fog lamps on . within five to ten minutes the switch gets very hot. almost to hot to touch.

anyones elses crew do this or is it just mine that is trying to flame me..

2bunik

:x I cant come up with any specs for the size of a box that fits so it dont hit the rear seat/ i am trying to install two 10s .. if any one has dimensions for one ten inch sub box .. please fork them up.. ive searched and have come up empty handed..... I will use these dimensions and make it longer ...

2bunik

thanx for the info Ill install the converter friday and post some pics on the whole system setup . thanks for that piece of info .. now i dont have to pull my deck out... ha ha

2bunik

:? I never have seen one that does . but do our stereos come with RCA outputs for a amp or does a line converter have to be installed. I want to install a 12 with a 500 watt amp . I want to keep the stock head unit cause i really cant afford a head unit . I am saving for a sus. lift kit... thanx for...

S-10CREWCAB.NET

Search found 410 matches

I got a question on flashlights

bed light Idea/install

I did the quad headlight mod on my 03

cigarette lighter keeps blowin fuses what gives

how is the quad beam mod doing? UPDATES please

WINDOW TINT TO MATCH THE STOCK STUFF INFO

Gauge bezel install gone bad!!!!!!!!!!!!!

lift question from a newbe..

fog light switch getting really hot..any have the same

ok here is a new one on subs!! I need help with 2 10"

amplifier install with stock deck? i needed info