S-10CREWCAB.NET

jeggers

its not a truck!

jeggers

pics we need pics

jeggers

http://www.s-10crewcab.com/coppermine/albums/userpics/10039/thumb_sitenew3.jpg http://www.s-10crewcab.com/coppermine/albums/userpics/10033/thumb_lift12.jpg http://www.s-10crewcab.com/coppermine/albums/userpics/10058/thumb_wheelin9.gif http://www.s-10crewcab.com/coppermine/albums/userpics/10071/thum...

jeggers

Welcome, there is allot of good people here and allot of info.

Take your time with the BL and read all steps and don't skip around. Do that and you will really be happy with the results.

I always say GO BIG!

jeggers

c schoelen,

What back spaceing, and how wide are the rims.

jeggers

Welome all newbees

jeggers

I just turned over 15k looks like i will be here for a long while. Well good luck with the full size and remember to drop in and say hi.

Steve, man I cant read your mods in the blue . How am i gunna keep up now

jeggers

i would buy it, but then i have had 4 second gen s-10 s and one blazer.

wonder if we can buy the sheet metal here in the us.

jeggers

jeggers

GO BIG!!!!!!!!!! I not 100% sure but the only sl lifts to go to sfa have been the tm lift. I am running a superlift and love it compared to a sfa rig. Besides is you have a more capable rig wont you just wheel it harder and end up breaking it to . Just speaking in general this is not directed toward...

jeggers

sweet

jeggers

Steve, thanks for the info . I was worried about the hpp3 because it has only been installed in the truck for 600 miles.

I cleaned the MAS, and cleared the DTC. I drove it for about 60 miles today and so far so good

If it comes back I will look into it a little more .

thanks again

jeggers

Basically this means that an oxygen sensor in bank 1 detected a lean condition (too much oxygen in the exhaust). On V6/V8/V10 engines, Bank 1 is the side of the engine that has cylinder #1.

could the hpp3 cause this?

jeggers

spend the extra $30, safety first man.

jeggers

second that wtf

jeggers

A good working daily drive sfa with a dana30 and all parts done by a shop would run you about 5000

I only spent half that on wheels tires ,body lift and 6" sl . Installed myself. and my truck see's paved road more than not.

jeggers

I wouldn't put those on a ford

jeggers

everything i use is dewalt exept for my Milwaukee sawzall

jeggers

GO BIG MAN!!!!! but keep the tires 33" and under

jeggers

i have the tire size set to 32" i will lower the shiftpoints this weekend and we will see how it goes

thanks

jeggers

2-3 is about 5500 rpm and the shift point is set at -1 my rev limiter is at 5600 rpm only so that i could make the 2-3 shift . power from the 4.3 drops after 5000 rpms. so i would like to shift sooner.

jeggers

ok i ment under full throttle

jeggers

I am running 32" tires and 373 gears where should i set my shift points to shift around 5000 rpm?

jeggers

thanks guys

jeggers

any one know what this is.

jeggers

Just want some opinions on what brand, size ect.......

jeggers

sweeeeeeeeeeeeeeeeeeet

jeggers

barch97 wrote:jeggers wrote:
i have about 8000k on my truck
You've got EIGHT MILLION MILES on your truck?

Thats not the fist time that i have done that

jeggers

i have about 8000k on my truck with the superlift 6" and no real problems from the kit ,just the installer (me). body lift is farely simple if you have some basic tools and mechanical skills. a mild tb crank wont kill these trucks, and some cut out flares and stock wheels and 31" tire you will have ...

jeggers

thanks guys

jeggers

called my dealer today and asked them about this and the told me to get a hpp3. help

i am trying to avoid the 400 dollor prise of the hpp3.

jeggers

hmmm superlift made one for there kit, bds???????? no skid. but i still have to take the d@m thind off to change the oil.

jeggers

I'd like to get the flares but my 32"s look small now, i would need 35"s to fill the wheel whells.

jeggers

if this is the look you want get the spacers

jeggers

35" tires

jeggers

steve u r mod crazy man

r u going with bigger tires

jeggers

lol lol go big 31" and cut out fares

jeggers

smaller is better.

jeggers

First how much back spaceing and what size tire is on there now??????

jeggers

I have notice on both my crews that after the bl it was impossible to get the bed perfect so that may be a crew cab flaw.

jeggers

like a zr5

jeggers

I don't think that I would recommend it. IMO, 33's are pushing it for the stock IFS. I probably would have not gone there if not for the lightweight narrow 33 that I am running. The next reason is clearance. When stuffed the 33's clear nicely, but a 35 would be too close for my comfort. They would ...

jeggers

Looks good Hj

, don't take any crap from any one that is the easyest and most economical way to go. good job!!!!!

so if i add those flares i could run 35"s with ease

jeggers

jeggers

jeff wrote:get the Deuler if you like a truck tire that looks like a car tire

lol

jeggers

good luck

jeggers

I am running geo at's to and they are great on paved and un paved roads. I only have 6k on them and so far so good. I have yet to take this truck in the mud with the new sl kit I want to put some miles on it befor I realy work it.

jeggers

ya i never meen anything by it i just cant sit here and take it it's just not me.

jeggers

just trying to help a fello crew owner out and all you guys can do is bust my #%$@!&% $@!!$

. i think i took those with my camera phone

so what do you plan running 35"s

jeggers

link't Link't the long url-HJ check this out summit sells the super lift with the ss skid plate http://www.s-10crewcab.com/coppermine/albums/userpics/10092/thumb_100_1943%20%282%29.JPG http://www.s-10crewcab.com/coppermine/albums/userpics/10092/thumb_100_1941%20%282%29.JPG http://www.s-10crewcab.co...

jeggers

are you a mechanic??

jeggers

I thought Jeff24 would jump in on this. ( I think he knows wheels) Jeff he is putting 4x4 wheels on a 2x2. I think that works but you just cant put 2x2 wheels on a 4x4 because of clearance. Correct? What???? 4x4 wheels on a 2x2 What is a 2x2??? :P those are pretty big for a small pice of lumber. ah...

jeggers

yes there is welding (the rear spring perches)

jeggers

with a tb crank and bl (before the sl) i test fited my 32s and with some trimming they would of fit.

400 for cut outs or 1600 for sl ouch.

jeggers

Those are going to rub. you may need to look into some cut outs.

jeggers

i seen one of those on a s10 cc looks ok

jeggers

???????

jeggers

Ok i bought a travle trailer last week and loaded its about 4500 to 5000 lbs. took it to wisconsin on friday and got about 7mpg. would a blower help much. the truck could realy use some more power. oh, and a silerado is not in the budget. gears gears and more gears Supercharger = $4400. Turbo = $60...

jeggers

6" sl front 6" rear 5"(i have a 1" lift shackle) front diff skid 12.5" clearance t- bar drop brackets 12.5" clearance reae diff 9.5 " clearence Now i have ajusted my tb a little , at first the were low and i was bottoming out, so they may be little over stock like .25 at the most. now total lift is ...

jeggers

been there done that

jeggers

jeggers

f9k9 wrote:losing a filling or two.

jeggers

as much lift as posible???? custome 3" bl, 6" superlift, 2" rear shakles , indexing keys for another 2" in the front. some cute out flares and 37" tire= 15" total lift. lol just was expecting more than the norm here.

jeggers

go big!!!!!

jeggers

jeggers

tease

jeggers

welcome

jeggers

I was thinking of getting a super duty................................................
..........................................................................

then i sobered up.

jeggers

jeggers

1/4 rocket?????

jeggers

Steve i dont have a muffler may be i need some more back pressure.

jeggers

Glad to see i aint da only one.

jeggers

I've been to Lexington. I lived in Louisville for a year. My girlfriend when I lived there lived in Jeffersonville Ind. The first time I went to her house there was a big block rail siting in her driveway. She got in my car and I asked her if it was her dads and she said no its my MOMS !! everyone ...

jeggers

michael_4x4 wrote:i want these rims really bad but i dont want them to rust after snow and the salt gets on them...does anyone think that if i take care of them it could work..and if so can i put a 10.5 inch wide tire on a 7 inch wide rim...

back to the subject here, what about the lift or no lift?

jeggers

I never even saw the SUD insted of sub, i suck man.

S-10CREWCAB.NET

Search found 458 matches

ses/ p0171

hpp3 again

B1025 - Driver Deployment Loop Short to Voltage

winches

setting pcm for new tires