S-10CREWCAB.NET

bubaloo1983

they are not cut outs though

bubaloo1983

ah i still love ya

bubaloo1983

you so funny

bubaloo1983

bubaloo1983

umm 350 isnt bad im doing mine at 375 shipped so its not over by alot, but again its nota cut out

bubaloo1983

i hate news like that thanks for making my day crew

just kidding lol, at least there not cut outs

bubaloo1983

im at the ground clearnce i am because of tires. but my next tire will be a 33 0r maybe even a 32. however my ground clearence at the front and middle are pretty good. 17 inches in the middle is alot and i could have more to i havent used the relocators to there full potential yet. when i go wheelin...

bubaloo1983

at the rear diff i have 11 inches of clearence. at the front at the lowest point ( my skid plate) i have 15 inches, and for the middle of the truck at the lowest point ( t bar drop bracketry ( with relocators though) i have 17 inches of clearence.

bubaloo1983

steve yours is pretty tall for what you got!

hey jeff any plans to do any more to our truck in terms of lifts?

bubaloo1983

wow i guess tires really do make a difference, and the t bar crank and shackles. im 3 inches taller then you guys muhahahah 8) but your trucks look better :) hey somecrew whats your emasurment to your mirror. i havent measured my bumbers but my back end is wayyyyyyyyyy in the air because of my shack...

bubaloo1983

i think with our ifs with 37s or something they would break off lol. mine are close to it

bubaloo1983

get some t bar crankin and shackles in there

bubaloo1983

you guys kill me, you really freaked him out. i dont think it will be that big of a rub because when i did body lift and t bar crank originally i put 2 inch spacers upfront and didnt even relize it would mess anything up but i never got any rub so maybe he will be ok?

bubaloo1983

hey jeg what was your measurements at the mirror? bottom

bubaloo1983

very cool some crew

tires are pretty meaty

bubaloo1983

dang but you are stronger up front too lol

bubaloo1983

you some crew

i want to see what i am missing out on

mine to my mirror is 56.5 inches with the tm and bod with 35s

bubaloo1983

ya lol whats wierd is my tes stick out in teh back really far and i have never been pulled yet ( knock on worrd) i love the truck man hey ho wtall is it to your side mirror?

bubaloo1983

man im really thinking about it thats for sure. ill atlk to ya soon about and how much i need ect.

bubaloo1983

i knew it was you...all along

hows your truck doing paul? hows the wheeling? i may be going sas pretty soon here. im looking into it, but when i do it im going all out with strongest axle biggest tires ect muhahaha

maybe i can score some info from you soon about it and where you got your axle ect.

bubaloo1983

some crew that thing is sooooooooooooooooooo sweet! i love it looks so badass. nice shackles

bubaloo1983

yah thats why i went with 35s and they are small with the cut fenders

bubaloo1983

get a bod steve is so small of a cost for more lift lol. makes your truck look huge with the superlift thats for sure

thats it sfa and 44s suckers...oh its coming

bubaloo1983

pretty crazy bumber. i mean its for sure stronger then our plastic bumber

bubaloo1983

thats a neat idea

bubaloo1983

thanks for your support lol

bubaloo1983

ok so i stopped the guy by my house today with the 6 inch superlift. and i wish my fricking truck was that tall and i thought mine was tall. this thing is nice! i just thought iw ould let everyone know i wish i waited for that dang superlift :( :cry: im going to go cry now ps kit looks pretty solid ...

bubaloo1983

im going to go out on a limb here and say you will need to trim. the fender is really small stock. even with 8 inches of lift. once you turn your tire you will be like right beside the fender. turn into a drive way or something and i think you will smack it pretty good. especially with the offset in...

bubaloo1983

alright got another for you guys. lately ( past month or so) my trucks been smelling pretty bad. every time i shut it off it smells like tar almost. and i cant even really tell from where. dula exaust causeing the problems maybe? i dunno but if anyone has had osmething like this let me know

bubaloo1983

yeah i mean cheaper in that i could swap out a few parts. mine is mostly street too. maybe i will look into ansas and see what i can come up with it.

bubaloo1983

yah i have thought about the sas. but like rusty says if its cheaper to just beef it up a bit with some other parts i would rather do that. plus in canada to do an sas is like 5000 bucks. i know a few people have who have done and thats what it cost for parts. if theres a cheaper way let me know

bubaloo1983

this may sound stupid but is there any parts that our trucks have upfront that can be swapped with full size ifs parts? like control arms or anything like that? cause if there was a way to do it i would be all over it. anyway dont think im dumb just wondering

bubaloo1983

lol yah if i get frustrated there will be some anger lol ill give it my all.

bubaloo1983

close to our shop my friend owns a automotive place and he has one so i think i will ask him fo rit. other then that thanks and ill be taken a stab at it this weekend

bubaloo1983

i ran stock rims though and i settled for frame rub cause it wasnt that bad. when you offset then it becomes the problem. i had 32s when i first got my lift and thought that hey i have 5 inches of lift its no biggie but because i also offset the rims they rubbed like a mofo. and it was a fricking in...

bubaloo1983

thanks so much henry. i think i am going to take a stab at doing it myself. seems like alot or work...i printed out your post lol

thanks again

bubaloo1983

i ran 31s on a bl shackles and a t bar with very minor trimming so 30 i think would be fine.

bubaloo1983

ok does anyone know how to change ball joints? i love you if you do cause i dont feel like paying another 500 bucks for parts and labour ugh

please explain in dteail

bubaloo1983

sounds good.

bubaloo1983

yah maybe check it out for me. cause i always thought it just ment standard 4x4 sus

bubaloo1983

if its cheap to get done like most powders i would get it steve. just because it will be hard to get it done any cheaper. pls i want to se ewhat it look slike

bubaloo1983

alrighty, i always thought z85 ment the 4x4 though? cause theywont fit the 2 wheel right? but if it means the same thing i will change it.

i do have a few bugs i guess it what yuou get when you dont make it yourself. i do metal not computers lol

bubaloo1983

powder coat chrome? umm sounds pretty cool. but powder coating doesnt stick very well to stainless steel ( if this is really a powder coat thats just shiny) so if you chipped it, it would come off pretty quik. stainless is a tough one for finishing. powder coating doesnt work the best, electropololi...

bubaloo1983

yah i am with jeff on this polshed sucks the big but. but they are cheap rims

bubaloo1983

i got my rims they are am atlas polished aluminum for only 120 bucks each canadian. i can imagine what they would be in the US maybe like 90 bucks or something? they look pretty good but will stick out a bit on your truck though. http://www.americanracing.com/dealerline/blackimages/blackbig/b660.jpg

bubaloo1983

im not sure if i will do insert or not. im whuipping up the drawing this weekend. it will probably take me awhile to do it though with all this stuff on the go! lol but when its done i will let ya know and of course there will be pics

bubaloo1983

sorry didnt read the other thread...my bad

bubaloo1983

thats pretty cool...i was thinking of wipping up the honey comb style grill and chrome plating it and then throwing some older envoy lights on my truck for now. 10 grand seems like alot fpr a front end swap

bubaloo1983

thanks man

bubaloo1983

glad you like your lift...

do you have some sorta fender flare on there?

bubaloo1983

hey steve no worries man when you get em you get em....have you looked into electropolishing? itw ill make your skid look pretty cool

bubaloo1983

only thing you can do to stainless steel is electropolish it and if there was someone around there that could do it they would charge you about 200 bucks

it would be shiny though

bubaloo1983

hey guys check out my new site

www.customskidplates.com

it looks way better. dont mind some of the mistakes on it i dont make the site so its kinda a war telling my web designer what is what ect. im working out the bugs

anyways

laterZ

Edited title-HJ

bubaloo1983

i was thinking the same thing and was thinking about making one at the shop.

if i do i will get some pics for ya

bubaloo1983

thanks guys

bubaloo1983

lol ya thats true. ive looke dinto it to too and i cant get it for what i have so i think the charger is out. all the availabity is in the US so when i have 2500 canadian to get something from teh us it doesnt work to well lol

i want be selling the truck till its at least paid off

bubaloo1983

hey guys just wondering what is the steering stabilizer and would it work witha tm lift?

i can use all the help i can get in this department

bubaloo1983

just kidding

when you can dude

bubaloo1983

oh and i wasnt givin ya shat i was just wondering what too so long to nstall a skid plate

which no one has posted pics of how it is installed so i have no way of seeing... hint hint

bubaloo1983

ah no worries steve. i have just had alot of problems thats all so it sucks. not blaming anyone probably alot of thinsg that added to the problems.

bubaloo1983

hey steve i had to wrestle the wife to keep me on this site. she says im on it to much to..its addicating. muhahaha

gotta love moddin the crew

bubaloo1983

when i first got the first alignemt ever after the lift i dont even remember where i got it? but from day one it drove funny but i was very low on info about this stuff back then. and just assumed its lifted and everythings changed maybe its supposed to drive like this. i origianly had 32s on my tru...

bubaloo1983

i have wheeled it but the alignemt shop even said something isnt right in the front end on how it was installed, which is frustrating because when i pay 5000 bucks for something ( this is canada lol) i would like it to be done well. so im taking it back next week and see what they can find. they thi...

bubaloo1983

oh yeah its been fun ugh. im seriously thnking of doing something drastic but im not 100 perecnt yet. but yeah the amount of crap these lifts put you through is unbelievable. if i had known i would have probably stuck witha bod lift t bar crank shackles and 31s or something. ah well you live and lea...

bubaloo1983

so i took it to my friends alignment shop today as im sick of all the goofs looking at my truck and not being able to fix it. and the diagnosis is...my pssanger side tire and suspension is totally screwed. he said it was off by a mile. and it cant be fixed basically. so im guess ing the guys who ins...

bubaloo1983

im going to compare it tomine tommorw

yah if you got a body lift that thing would be huge. it already looks as tall as mine with jus tthe SL kit hehe

bubaloo1983

how tall are your guys trucks? i would be curious to see what the difference is from mine to yours

bubaloo1983

nice looking truck to jeg

bubaloo1983

yeah only thing i just relized its american bucks darnit :S

bubaloo1983

i walked into the dealership and then walked out with the keys....

i dont know how it happened. lol

bubaloo1983

thanks for your help guys im looking into it and i will see what i can find

bubaloo1983

hehe my tires are 35s

yeah im a canuck

ill grab you some pics when it stops pouring rain over here. its just coming down and i aint going out there

bubaloo1983

hey no worries. yeah i do custom work at request i just dont see the "need" for an actual design yet for the superlift as it comes with one if you want it. yeah if you could take some pics that would be sweet i would lik eto see the design compared to mine. and see if it is improvable for oil access...

bubaloo1983

i like it

bubaloo1983

yes because you dont have to all the lift mods to the crossmemeber you just have to horten it for the reallift

S-10CREWCAB.NET

Search found 564 matches

i want a superlift

tar smell

IFS ?

ball joint replacement

my new site customskidplates.com

steering stabailizer?

front end