S-10CREWCAB.NET

gocntry

Every wall or barrier between you and him will degrade the signal. How much degradation depends on the particular application. You could run a coax cable from each router to a point on each house that would allow for line of sight, such as an upstairs window or something. Is that possible at all, o...

gocntry

You'll want the cantennae to have as direct line of sight as possible. Place it someone in front of a window that is facing your cousin's house, and have him do the same. That Won't Be Possible, The One In My House Will Be Aimed At An Exterior Wall, The One In My Cousins House Will Be Go Thru 2 Int...

gocntry

Paid $1.88 Wednesday, Back Up To $1.93 Today

gocntry

I've Got About 95 Invites Too. So If Walt Runs Out I'll Be Happy To Send Anybody An Invite That Wants One

gocntry

Here's The Model I Believe You Need

Pace Edwards Roll Top

Now Just find A local Dealer Pace Edwards Dealers And You Should Be Good.

gocntry

HenryJ wrote:Yes.

Basically you can do the same thing with a 2x4 and a jack. Jack the truck up, wedge the block in there and let the jack down. The truck stays up and the axles angles are increased.

That Sounds Like A Cheap Lift Redneck Style, I Ought Try That.

gocntry

P235/75R15 105 Q Will this tire fit a stock Zr5? Or will I need spacers. What size spacer should I get? Thanks! 235/75R15 Tires Came Stock On My Zr5 & There Is A Sticker Inside THe Driver's Door That Verify's This Is The Factory Tires. I Run 1.25" Spacers On The Rear Just To Make 'Em Line Up With T...

gocntry

can your tail/brake lights still be seen reasonably well through them? Yep They Really Look Good Lit Up (I'll Try To Do A Night Shot). I Think The Only Problem I Should Have Is It Probably Wont Pass Inspection With Painted Taillights. So I'll Keep The Stock Lenses & Just Switch 'Em Once A Year When...

gocntry

The ZR5 package is an appearance package, the suspension and drivetrain are exactly the same as a normal crew cab. The ZR5 package adds different wheels, flares, bed rails, and a roof rack (might be some other stuff, but that's the main thing). Just Add The Step Bars To That. :wave: Welcome To The ...

gocntry

Thanks For All The Positive Comments.

I Just Couldnt Decide If They Looked Too "Ricer" For My Taste.
I Guess I'll See If The Local Police Like Them Or Not, Sometimes They Can Get Kinda Picky Around Here.

gocntry

I Got These TailLights A While Ago From Zr2.com & Forgot All About Them :oops: I Was Cleaning Out The Garage & Found Them After Installing Them Now I Don't Know If I Like Them Or Not So How About Some Other Opinions...... The White Color Is A Little Off, The 3rd Brake Light That Came With It Isn't T...

gocntry

Also, I need more specifics. In the second building, is it a house, large single floor building, multiple floor building, etc..? Gonna Transmit The Signal From My Cousins House To My House. Both Houses Are Single Level Ranch Houses. About 1000 SF (Small) There Is 1 Neighbors House In Between Us. We...

gocntry

I Need To Broadcast A Broadband Signal From One Building To Another Coverage Needs To Be About 3/4 To 1 Acre Radius From The Router. Is There A Router That Will Do This?? Or Will Any Router Do This?? Or am I Just A Dreaming Fool?? Would Like To Keep The Cost Of Equipment To Around The $100.00 Range ...

gocntry

I did It A Couple Months Ago, But I Just Went Back And Did It Again.

gocntry

I Got My Special Policy Letter Tuesday The 10th

gocntry

Yeah That's Scary.... I Was Visiting Relatives In Lancaster Pa. The Other Weekend (In Lititz) And I Took My Daughter To The Strasburg Railroad Station Which Is Pretty Close To Where That Happened. We Took A Train Ride Thru Amish Country (On A Real Thomas The Tank Engine Train :D) So We Could've Been...

gocntry

I will be using a different email address for correspondence dealing with purchases. Yahoo, Gmail , or another expendable account may be a better choice as they are less likely to reject email. I Have 100 Gmail Invites..... If Anybody Here Wants One You Can Post Or PM Me Your E-mail Address And I'l...

gocntry

killian96ss wrote:GM also provided me with an emission label stating that the air system was no longer needed for emission testing. It sure did help clean up the engine compartment not to mention get rid of 18 lbs of uneccesary junk. Steve

Can You Make Us All Copies Of That To Use On Our Crewcabs

gocntry

kwalsh wrote:2003 ~ still no letter.....

Same Here....2003 No Letter Yet

gocntry

f9k9 wrote:I have 'em and think they're worth the extra cost!

Bilsteins Get My Vote Too..........

gocntry

2003 zr-5 is a double DIN opening 4 inches. Reeds 2002 could be either 1.5 or 2 the change occured mid-year if the dash opening is 4 inches it's double DIN if it's less than that it's the 1.5 Din. I beleive one way to tell is if you have the cd/cassette deck in the dash it is a 2 DIN if your casset...

gocntry

Ok... Now I Have Confused My Self......I Thought Our Stereo's Were 1 1/2 Din But According To The Sizing Of The Din Openings I Got Off The Crutchfield Sight 4" Is A Double Din Opening? So Which Do We Have?? Here Is A Link To A 4" Tall Double Din Stereo Double Din 4" Stereo Here Are Pics Of My Instal...

gocntry

04crewvt wrote:If I am correct on the model years, 1.5 din size radios from 2000-2002 in our trucks. 2 din for 2003-04, but know one seems to show an aftermarket double din to fit our trucks.

Mine Is A 2003 And It Is Only A 1.5 Din I THINK.....See Post Below

gocntry

BTW.....can someone explain " DIN " to me? I Don't Know All The Technical Jargon For "DIN". But "DIN" Is The Size Of The Radio Opening. Our Stock Headunits Are Considered 1 1/2 Size Din. The Aftermarket Units Discussed In this Thread Are Considered Single DIN. Some Factory Radio's Are Double DIN (b...

gocntry

:thumb: Nice Choice..... I Just Installed The CDE-9852 In My Truck Saturday.. It's The Same Unit Without The Cd Controller & The XM Controller....I Figured With Being Able To Hook Up An Ipod & Mp3-Wma Compatibility I Don't Need The Changer Controls Or XM. I Ordered It From Crutchfield Months Ago An...

gocntry

I know this just complicates things, but if it were me, I could go with the unit below and add a tuner. Alpine CDA-9856 http://akamaipix.crutchfield.com/products/2005/500/h500cda9856-f_DC.jpeg Then again, I have separate amps and such, and this head unit has a few more features related to that. But...

gocntry

No set in the classifieds. :( I wonder if Paul ever sold the ones he was selling? Yeah Their Sold, Their Sitting In My Garage Right Now 8) Realift Web Site You Can E-mail Jeremy I Think, The Relocators Work On A Blazer But You Have To Modify The Transmission Crossmember. And On The Blazer You Will ...

gocntry

I've Had The Rancho RS5000's On My Truck, They Were Ok But I Seemed To Kill Them Pretty Quick.
I Have The Bilsteins Now, I Like Them A Lot Better.
I Have Never Used The Rancho RSX's So I Can't Comment On Them.

gocntry

HenryJ wrote:Everyone that gets one installed sells the truck, disappears or both. Even some of those who consider one ,sell the truck. So how much you asking for your truck?

Oh No Say It Aint So Walt Scores A Supercharger

gocntry

My Local Dealer Dudley Martin Chevrolet Has 3 On Their Used Lot Right Now.
A 2004 Chevy Ls 18,995
A 2003 Chevy Ls 17,995
A 2002 GMC Sls 17,995

gocntry

I have replaced the threads related to the flares after proof reading them , fixing some broken links and pictures. The mod page will not be restored until I have time to replace my flares and add some preemptive measures to the install. Anything we can do to help things , needs to be done and I do...

gocntry

Well I've decided I'm not going to wait for the factory warranty to run out before I put a fan on the truck. I'll be heading to the junkyard Sunday to find me a nice Taurus fan, and I've ordered my relays from partsexpress.com. Here's A Write Up On A Taurus Fan Install , This Is Not By Me But Came ...

gocntry

sorry for brining up this old topic , but where are these caliper slide pins you speak of ? Yeah I Would Like To Know Too.... I Have The Rear Wheel Off Right Now And Was Going To Lube The Slide Pins But What Are They? Are You Talking About The Short Bolts That Hold The Caliper On? Sorry For Being A...

gocntry

The Rubber Bushings Stay With The Airbox And Pull Off The Little Plastic Studs That Are In The Center, I Was Worried I'd Break Mine So I Sprayed A Little WD40 In The Center To Make It Slide Off Easier. I Just Wiggled It Back & Forth Until They Slid Off The Posts

gocntry

On Mine Once You Remove The Top & The Filter, There Was A Bolt Over By The Fuse Box I Had To Remove Then There Are 2 Rubber Bushings Up Front I Just Pulled Up On And They Popped Off. I Had To Wiggle It Around The Upper Radiator Hose Too

gocntry

This might help out GoCntry. :idea: His muffler bearing may have wornout causing some misalignment between the pre-cat and cat. He should question the dealership. :lol: :lol: J/K :lol: :lol: .....It Seems A Lot Of S-10's Have The Muffler Bearing Go Bad, Maybe There Should Be A Recall On This :wink:

gocntry

Steve2003 wrote:I had the same problem and the dealer sent it out to the muffler shop to get repaired....They had it done in one day....no charge.

Mine's A 2003 Also It Has Almost 28,000 Miles On It.

Do You Remember What Milage Your died At??

gocntry

Dealer Has Called And It's A Bad Catalytic Converter, They Didn't State If It Was The Precat Or The Main Cat Or Both But They Won't Get The "Special Order Part" Until Probably Thursday.

Good News Is It It Covered Under Warranty So It Is A No Charge Repair

So That's A Relief To Me

gocntry

Looks Like Summit Racing Might Sell What Your Looking For

Summit Racing Link

Don't Know If This Helps But It Might

gocntry

As Of Now: The Transfer Case Fluid Level Check Out Ok. I Did The 24" Extension Stethoscope Trick And It Sure Sounded Like Something Rattling Around In The Precat & MAybe The Cat Too? If It's The Precat / Cat That's The Problem And It's Under Warranty & It Should Be Fixed At No Cost I Didn't Want To ...

gocntry

You could cut it loose, finish breaking out the ball that is bouncing around in there and have the gutted precat welded back in place. That is if the main cat still looks clean. The main cat should do all you need to pass the sniffer, but you may be right about needing the precat "there" to pass a ...

gocntry

Do you have a reciprocal saw? Check the transfercase for fluid first. Now you need a stethoscope. I have a favorite 24" long 3/8" drive extension that I use. I place my thumb on the end and my thumb firmly in my ear. Then place the other end against the suspect source. Be careful to avoid moving pa...

gocntry

Update: I Ran The Scanner I Have No Stored Or Pending Codes. I'm Using An AutoXray 6000 If That Makes Any Difference. I Re-Checked The Skids And checked The Heat Shields And Tapped Anything I Could Reach Under The Truck And Could Find Nothing Loose Or Rattling. I'm Getting Ready To Check / Change Th...

gocntry

gocntry , are there any codes stored? :? Steve I Dont Have The SES Light On. When I Get Home Tonite I'll Run The Scanner On It And See If I Have Any Stored Codes. Driveability Seems To Be The Same No Loss Of Power Or Running Funny. I Checked My Skid Plates And Tapped Around Under There With A Rubbe...

gocntry

Ok, The Truck Is At It Again :x It Started Yesterday And Again Today, When It's Cold And I First Start It It Make A Terrible Sound For Just A Couple Minutes Until It Gets Warmed Up. The Sound Is Kinda Like A Couple Empty Soup Cans Rattling Around Under The Truck. At First I Thought It Was The Chain ...

gocntry

2kwik4u wrote:I think thats the one that goes to the core support. I'm thinking he needs to the one that is under the fuse block.

You're dayum close though!

Well My Parts Sheets Don't Seem To Include The Fuse Block & Mounting Bracket

But I'll Keep Looking

gocntry

I got my new filter today from K&N. :D I am having a hard time locating the part # for the stock air cleaner mounting stud/bracket though. :( K&N said they will pay for the bracket if I can find the correct GM part # and e-mail it to them. :? Does anyone here have access to a GM parts break down ma...

gocntry

If The Person Who Hit You Let Their Insurance Pay For It Couldn't You Just Have A New Door Skin Put On??

gocntry

OUCH!

Been There Already, Got Mine From A Shopping Cart In Costco Parking Lot,
Not As big As Yours But I Still Was Pretty

gocntry

How About A 1000 Hp In Your Crewcab

Looks Like It Would Be Tough To Stuff It In The Engine Bay Though.

Broadband Only...............Dial Up Will Take Forever But You Can Right Click & Save It.

http://www.nelsonracingengines.com/vide ... V6HIGH.wmv

gocntry

Where in the blazes is a pic of those slider? Well This Only Took 3 Weeks :shock: But Here Are Some Pics :D I Have The Xtra Bolts But Still Need To Drill The Holes. Also Have Some Minor Adjusting To Do Before I'm Totally Happy. http://members.cox.net/gocntry/CrewCab%20Pics/sliderd.JPG http://member...

gocntry

Quick Question About The Spare Tire Carrier In Your Bed. Does It Let You Enough Room At The Back To Have One Of The Bed Extenders Mounted There Too?? You've Done A Great Job To The Crew It Looks Really Good

gocntry

I Took A Short Trip Last Saturday, About 5 hours 1 Way. I-68 West To MorganTown Wv, Stayed Over Night At A Hotel And Started Back About 11Am Sunday Morning, Didn't Have A Problem The Whole Way Until About 20 Minutes Into The Return Trip Started Up A Steep Part Of The Mountains I Dropped The Tranny O...

gocntry

f9k9 wrote:I asked him if he thought he could finish up my sliders by welding them on.

Why The Welding??

Did You Have Thoughts That The Factory Studs Aren't Strong Enough To Handle The Weight?

gocntry

Here's A Pic Of The Grill & Headlight Housings Blacked Out, I Did Everything But The Bowtie.

gocntry

The 4.3's can be built to make some good power. I have seen several 300 hp 4.3 build ups, but I can guarantee they won't pass any sort of emission testing. How About 569 horsepower at 7200 rpm & 451 lbs-ft of torque at 6000 rpm?? This Is From 1995 GM Parts Direct Sells The Heads They Talk About In ...

gocntry

F9K9 Your Truck Looks Great

gocntry

For The Bds Lift Call Them To Get Your Local Distributor & Call Them For A Price, I Was Quoted $1650.00 For The Lift No Install Included (their website price is probably more expensive than their authorized dealer pricing) I Believe The Biggest Difference Is The Superlift Requires Some Minor Welding...

gocntry

Jigg wrote:Rog's email address is:
devriessigns (at) gmail.com

They won't be available until the end of the summer, and i'm 99% sure they're open to everybody to buy. Afterall, they're S-series, not zr2 specific bumpers.

Thanks For The Info Jigg.........

gocntry

well hopefully the person making the bumpers will have a contact number or site OUTSIDE of ZR2USA.com . Sorry But The Person Who Will Be Making These Bumpers Is The Owner/Founder Of zr2USA.com. :( So am I correct to assume that they will not be offered to purchase by anyone other than a ZR2 owner ?...

gocntry

Blaze One wrote:well hopefully the person making the bumpers will have a contact number or site OUTSIDE of ZR2USA.com .

Sorry But The Person Who Will Be Making These Bumpers Is The Owner/Founder Of zr2USA.com.

gocntry

gocntry wrote:That Bumper Looks Awesome

It Also Looks Like The Animal Bumper Will Be Made Again

Animal Bumper On ZR2USA.Com

UUHHHH... Should I Just Delete My Post Before I Get You Guys All Riled Up?

gocntry

That Bumper Looks Awesome

It Also Looks Like The Animal Bumper Will Be Made Again

Animal Bumper On ZR2USA.Com

gocntry

I Think This Is It.....

S Series Nationals

gocntry

Check Where The Emergency Brake Cable Goes Thru The Black Bracket Right In Front Of Your Driver's Rear Tire. I Had A Squeacking In My Rear End And It Was The Cable Being Pinched In The Bracket And When The Suspension Moved Caused It To Squeak. I Removed The Bracket (1 Bolt) And Opened It Up A Little...

gocntry

Nope Wasnt Hacked It's True....

There Is A Thread About This On Zr2usa.com

Zr2USA Thread

gocntry

Summit Racing Carries Them Part # SLF-K776 I Believe

gocntry

I Don't Know What The cause Was But My Truck Had The Same Problem, It Was Replaced While The Vehicle Was Still Under Warranty And I Had About 22,000 On It I Believe.

gocntry

He's On Ebay, It's Just Spelled Different

S10 Warehouse

gocntry

f9k9 wrote:I am gonna risk venturing into VA

How Far North Into Va Are You Headed??

gocntry

Now that I got my rear done... what about the front...I have had my belly pan off and the superlift skid plate off for about two months as I was having work done...now I'm ready to put every thing back on but I thought what about changing the front differential fluids....how do I do this? Help!!! T...

gocntry

I Use Mobil 1 5W-30

gocntry

Very Nice Bumper

Can't Wait Until The Prototype Is Finished So You Can Start Production, I'm Sure You'll Have People Lined Up For Those

gocntry

Ok I Had My 12 Year Old Daughter With Me The Other Day And Noticed She Was Wearing A :alert: Ford Mustang :alert: T-Shirt. So I Told Her She Was Not Allowed To Wear A FORD Shirt In My Chevy Truck. So She Told Me To Buy Her A CHEVY Shirt And She Would Wear That Instead :lol: Now I Need To Find A Nice...

gocntry

HenryJ wrote:I don't think you'll be disappointed this time.

Well It's Been 10 Days And No Complaints At All, The Bilsteins Are Some Really Nice Shocks.

I Also Have The polyurethane Kit For The Front Sway Bar To Do This Weekend.

S-10CREWCAB.NET

Search found 574 matches

Re: P235/75R15 105Q Tire

New Taillights - Gimmie Your Opinion

Long Distance Wireless Router - Question

Re: Trail-Gear Inc.

Re: Taurus Electric Fan Project......

1000 HP 4.3 V6

The Crew Dies.......But $525.00 Fixes It

Re: Changing Front Differential fluids

Need To Find An S10 T-Shirt