S-10CREWCAB.NET

AZS10Crew

Well...Hobie's got 1.75" spacers on his and I don't think he had to trim anything. Just take off your wheel and measure the stud. If it's less than 1.5" long, then there's no trimming required. There's a lot of shop guys out there that are idiots...they're just salesmen trying to make more money. Th...

AZS10Crew

Boy, don't I feel like a young-un!

AZS10Crew

They're trying to get a GP going on some over at ZR2.com here but that thread has been there for weeks with no official details yet. You could also check here for a list of the part numbers for wheel spacers that work on our trucks and then click on the link on that page to take you to a place to or...

AZS10Crew

26 here.

I looked at Silverados also before I got this, but they were just too expensive. I might get a Z71 eventually, but my crew does great for now.

AZS10Crew

No worries...to each his own. Like my dad used to say...if everyone liked Fords, what would Chevy do?

AZS10Crew

I'd be curious to know about engine tweeks too. I don't know of any one mine. :? The cloth interior is different though. I like it better than the 02's. It's kind of like a soft canvas-type material. I think it will show wear much less than the fluffier velour on the 02's, but only time will tell on...

AZS10Crew

Hey, me too! I sold my '99 SS and bought the CC. I do miss that car, but just didn't drive it enough. I had headers, no cats and the SLP Loudmouth (as you probably know, this is just a small resonator in place of the muffler). Before the headers and no ctas, it sounded great. After that, it was int...

AZS10Crew

My LS1 in my Z28 always had lots of valvetrain noise...especially during warm up. It wasn't too bad once it was warm, but when cold, combined with the nasty pinging when it was cold, it sounded horrible! But like I said, once it warmed up, it was pretty smooth and quiet.

AZS10Crew

I've only seen one on the road here in Phoenix. The dealership I bought from only had 4 on the lot, and it's a dealership with an inventory of over 2000 cars and trucks!

AZS10Crew

I'll talk to a friend of mine here in Phoenix that does web hosting from his home. He's currently hosting the local F Body website for free I think ( www.arizonafbody.com ). Maybe I can get him to hook us up with some good server space and a decent amount of bandwidth. That site I posted was my firs...

AZS10Crew

I got it online from a place called Beach Audio. It was $212 and then $5 for UPS ground shipping. I got it in just over a week. It's basically just plug and play. All you really need to buy is about 15-20 ft of power wire (at least 12 gauge...I used some left over 8 gauge that I had from my old setu...

AZS10Crew

Is that from the same company that makes the "Tornado?" :D Seriously though, I don't think that will do jack for creating significant power...it's a total ricer mod. With two of them in series it says it will produce up to 9% more HP, which on our trucks is 18 HP. K&N says their filters add up to 25...

AZS10Crew

I'll try to throw something together for you guys this week or maybe this weekend. I do web design and graphic design in my spare time so I'll see what I can put together. Do you want a vinyl type sticker with just letters only or more of conventional bumper sticker design? FYI...here's one of the w...

AZS10Crew

And it sounds awesome! Nothing earth shattering or loud enough to bounce quarters on the roof, but it's definitely strong enough to notice and it shakes the rear view mirror pretty well too. Probably sounds at least as good as a single 8" would. Fits perfect behind the rear seat too. Didn't even hav...

AZS10Crew

I'm thinking of just trying it. The rear section just unbolts right after the cat anyway, so I may try and unbolt it some weekend and see how it sounds.

AZS10Crew

Any of you guys run just a straight pipe in place of the muffler or know anyone who does? I'm thinking of doing this with mine, but if it sounds bad or really insanely loud, then I won't. I used to have a cutout (open exhaust after cat) on my Z28, and it sounded sweet (scared away lots of ricers :D ...

AZS10Crew

I think my 2003 might have that too. Is it kind of a vibration type of thing in the middle RPM range? Mine seems to be doing something like that. I figured it was just a thing with the enginge not being broken in yet or something. I guess it's not a serious problem, so i'll just have to get used to ...

AZS10Crew

Oh...he said ROCK. I was beginning to wonder if I should really be hanging out here.

AZS10Crew

Looks good. You built that all yourself? Impressive.

AZS10Crew

Maybe they think they'll sell more with less standard features? In a way I'm glad it did come with less...saved me some money.

AZS10Crew

Yes we have full size spares. :shock: What size is that donut spare, is it smaller in dia. or skinny? If it's smaller in dia. is there a warning tag that states not to use the 4x4 when it's installed? :roll: It's the same diameter as the stock wheels and tires, but it's only like 4" wide. It confus...

AZS10Crew

I have a full size spare unofrtunatly. i want a donut because if You can see in some of my rear end pictures, the tire hangs down a little. This is because I have the hidden hitch behind the roll pan and it is designed for use with a small spare tire or none at all. i may go to a junkyard at some p...

AZS10Crew

a2b wrote:yes it is suppposed to be very dirty!

Good thing cause I'm WAY too lazy to wash it all the time.

AZS10Crew

Hobie suggested something like that a few months ago he said I should put the spare on a roof rack. Your suggestion sounds like it would work nice for a truck that doesn't need a spare or a two wheel drive that can run a small spare. Mine only came with a donut spare anyway. I took that off abut 2 ...

AZS10Crew

Fortunately it almost never rains here in Phoenix, so I probably won't get them.

AZS10Crew

Just a thought...but I wonder if you could set it up like a Camaro with a Flowmaster 80 series? The 80 series for the F-Body has the in on the right hand side as you're looking at the rear, and an out on the left and right that would be directed out the back. If you remove the spare tire and do a li...

AZS10Crew

Well, I mentioned one time that if you do have the rear gm locking diff, that the oil should be changed at least at the first oil change. Not sure how often after that. I've changed mine twice and I have 31k miles. I had the G80 rear end in my Z28 (can't remember if it was locking or limited slip.....

AZS10Crew

bought a flowmaster 40 series single in dual out and had 2.25" pipe ran through the back just like the stock as well as the other side. Then I had 3" Gibson Tips at the end. I don't personally like the job because he didn't use stainless steel. I plan on redoing my exhaust after I get a high flow c...

AZS10Crew

Unless they can prove that your dual exhaust somehow caused your manifold to come loose, they should fix it under warranty. It may take a couple trips to a couple different dealerships, but you should be able to get it done under warranty.

AZS10Crew

Not everyone has the modification bug I guess.

I know my wife sure doesn't.

I had my dash apart a week after I got it putting in a new head unit and changing the gauge cluster bulbs to red ones.

AZS10Crew

Nice setup.

Did you have to cut out the jack mounting bracket to get the enclosure back there or does it fit over it?

AZS10Crew

Who's got them? What do you have?

I just ordered a 6.5" Bazooka powered tube. Hopefully it will satisfy my thirst for better sound. I'm still curious as to what else can fit behind the seat in the back though.

AZS10Crew

I used to have them on my 92 S-10. They were noticeable at first, but eventually you got used to the obstruction...and they didn't really block your view all that much. I doubt they'd block your vision too much on our trucks. But I'm used to driving a Camaro fro the last three years, so I feel like ...

AZS10Crew

Mine is showing though...not too bad from a distance though...so I guess you're right. But it's a 4x4, it's supposed to be dirty, right?

AZS10Crew

Welcome aboard AZ......Looks like you got things worked out with out help afterall :thumb: Any tips for those who had troubles getting started? Keep those posts coming! We may finnally have someone who can give a2b a run for his money :evil: I'll see what I can do. As boring as my job is, I'll prob...

AZS10Crew

a2b wrote:if superlift doesnt have a lift by next summer, i will do the trail master. and i will head up east to have paul help me!!

Sounds like a plan to me! How about we make it a road trip?

AZS10Crew

I'll see what I can do, but I don't think I'll be able to take off work that day. I don't have much vacation time left, and with the holidays coming up and family visiting, all my time off is pretty much spoken for.

Thanks for the invite though! Maybe some other time.

AZS10Crew

Don't worry about that...I'm the coolest! :D Camping? My idea of roughing it is staying in a Motel 6. :lol: I'm in Avondale, which is basically the first town you come to on the I-10 on your way in from LA. That puts me a good 45 minutes from Mesa. I might try and come out during the day and drive h...

AZS10Crew

hello azcrewcab. hi and welcome. so now that i know another crew cab in az, you wanna do some off roading? i will be in mesa in 2 weeks. the weekend of the 23rd. it will be me and about 12 other zr2's. let me know if your interested - hobie I'll say definitely maybe. If I don't have anything else g...

AZS10Crew

Will do...I need to wash it first though since I was busting through some puddles a couple weeks ago and haven't had a chance to clean it up yet.

AZS10Crew

I've never seen a blue one around here. I almost got a yellow ZR5, but the dealer didn't want to work with me on my trade (99 Hugger Orange Z28), so I went somewhere else and got my pewter one. Only bad thing is it's a lot harder to spot in parking lots than my Hugger Orange Z28 was.

AZS10Crew

quickbiker...how much modification was required to adapt that Superlift to your Crew Cab? Any cutting or anything required? How much would you estimate it to cost (labor and parts included)?

Thanks in advance...

AZS10Crew

Finally I found someplace that's just for the Crew Cabs!

The board looks great and I look forward to hanging out here and absorbing lots of info.

S-10CREWCAB.NET

Search found 1243 matches

Re: Straight pipe I/O muffler?

The Bazooka is in

Straight pipe I/O muffler?

Subwoofers...

Newbie here...