S-10CREWCAB.NET

Built2Bend

Like it says crew cab 6ft bed v8 s10

http://cincinnati.craigslist.org/cto/4980693519.html

Built2Bend

I got another question if you don't mind. What did you use to seal the wire in the hole so it won't leak(also what did you use)

Built2Bend

Awsome I was starting toget worried!

Built2Bend

Cgrob you can have the wheels I think I'm going to have to pass 500 with shipping is alittle more than I want to spend thanks anyhow

Built2Bend

I haven't seen any tube doors I don't think but I have seen some half doors on truggys and actually I did see one tube door but it was connected to the exo cage not the door hinge. If I'm right all of them were on pirate 4x4

Built2Bend

Ya I'm ordering mine now!

Built2Bend

Scratch that last post I just noticed you already answered that thanks.

Built2Bend

Yes interested in all 5. And are the rims all silver or silver and gray if you do t mind?

Built2Bend

Are the wheels all silver or the silver and dark gray ones? Also can you estimate shipping to 44833?

Built2Bend

And just to be clear I'm buying the correct one. This is the led bar you posted a link to in the other led thread?

Built2Bend

Ya that looks good.

Built2Bend

Ya I was told in auto tech that if you but the wrong back spaceing of wheel on a vechicle that's not designed for that back spaceing that it could put extra leverage on the bearing coulseing them to wear out faster. But I see you points many people run much larger tires with wheel spacers. I guess I...

Built2Bend

Do you think you could get a picture of it on you truck but with the light off?
And did that bracket you used come with it? Thanks a lot!

Built2Bend

Do you have a picture from head on? With this angle it looks good. My only concern and some one ealse will probly chime in but are you worried that it being spaced out farther that it will put more stress on the bearings

Built2Bend

Sorry I'm very late here. That truck was scrapped before I could go back for the mirror.

Stucky I owe you a clip and that dash panel. Is you message me your address I'll send it to you on my dime(becoulse it's been a month and I never got back to you I'm very sorry about that

Built2Bend

We'll only a couple places sell s10 sas kits that I know of. https://www.4wdfactory.com/store/products/Chevy-S%252d10-Solid-Axle-Hanger-Kit.html There's sky's kit https://www.4wdfactory.com/store/products/94%252d04-Chevy-S10-Solid-Axle-Conversion-%284wd%29.html Ord kit. http://www.s10forum.com/forum...

Built2Bend

This thread says 2 company made kits for it and has a couple pictures. But no one sure what the company's name is. http://www.s10forum.com/forum/f220/can-we-ditch-the-torsion-bars-458612/#/forumsite/20875/topics/458612 Here's some good info http://www.race-dezert.com/forum/threads/looking-for-s10-4w...

Built2Bend

I've seen 1 coil over ifs lifted truck. It was a build thread I. S10 forum I believe. He used after market upper and lower control arms. With custom coil over mounts. And I believe he even had the coil overs custom made. I'll see if I can find it Agean. And I believe a couple people have made heavy ...

Built2Bend

I second the pictures!!!!

Built2Bend

Where are you located? There's a s10 crew on craigslist near me being parted out but i don't know if your in ohio

Built2Bend

Do you have a photo bucket account? If not I would recomend geting one that's the easiest way. Upload you pictures to photo bucket. Then look at that specific picture on photo bucket and hit the button on the screen that looks like a chain. Then at the bottom of the screen it pulls up will be the ad...

Built2Bend

Approachmountian : the driver front door panel is broken someone pulled it off an destroyed it. if you mean the pictures yes there cuting off quite a bit it may be hard to tell becoulse I started leaving a lot of extra room on the right side to try and compensate. Stucky: I'm going back tomarrow so ...

Built2Bend

Built2Bend

Ok here's the picture of the front driver door. I don't know if you can see it but there's a lot of dents and scratches along the bottom. http://i1376.photobucket.com/albums/ah5/Austin_Tomecko/Mobile%20Uploads/image_zpsnmlodghp.jpg And here's the picture of the pass mirror. And I have a picture of t...

Built2Bend

Sorry I need to start proff reading my posts Stucky disregard that part about heated mirrors.
And British ninja look at stuckys to see about the mirrors you wanted.

Built2Bend

Hey I can get you any seals you need I just need to know which ones and work out a price I have some pictures seam to be in good shape. Just let me know if you need them.

Built2Bend

Approachmountian. Sorry some one pulled the door panel off and destroyed but I think any power window door panel will fit. Now as for the dash vent I dident look but I'm going back tomarrow of Sunday and I can check but those are brittle in bellow 0 weather so I dought I will be able to get it off b...

Built2Bend

I'm sorry guys I never made it to the yard last week. I'm going tomarrow morning for sure

Sticky: do you still want to know about that panel beside the radio

Britishninja do you want me to check for the driver front door and pass mirror?

Built2Bend

I'm going to my junk yard tomarrow I'll let you know if I can get you one.
Also do you have a picture of exactly witch larts you need?

Built2Bend

I think shipping would probly kill it I dident realize how far it was.

Built2Bend

How much are you asking?
Are they all silver, or silver and black?

Built2Bend

Modified above post

Built2Bend

I've been trying to find a black cap for ever. Those are imosible to find!!

Built2Bend

Welcome aboard. Ya s10 are extreamly common so lots of deferent forums.
But that's part of why I like them plenty of options, upgrades, and reading.

Built2Bend

OFF ROAD BUMPERS you'll have to try and contact boondock they don't list s10 bumpers on there web site any more http://m.goboondock.com be careful this company has changed names acouple times and I've herd bad about who they use to be http://www.bluelakeoffroad.com/index.php?p=product&id=133&parent=...

Built2Bend

You talkin about the blank panel where blazers Rear hatch wiper switch is?

Built2Bend

But just so you know the front door should be the same for any blazer 1998 up with same options(power locks,power mirrors,exc exc)

Built2Bend

I'll have to double check I don't know if they sold it sence the last time I was there. I'll get back with you Saturday.

Built2Bend

Welcome to the forum glad your wernt hurt in the wreck.

Built2Bend

Cellardoor420. I don't see your location. Are you stil wanting to trade your leather rear seat for a fabric one?

Built2Bend

Never mind sorry they are gone

Built2Bend

I'll have to check if there still there but there's a crew at my local pic n pull it's tan in color. If you'd pay for them and pay shipping plus a little cash for my work. I'll send them to you.
But I can't guarantee they're still there

Built2Bend

Also have you considered a body lift? A lot of members it seams have installed a 2in body.

Built2Bend

If you can find an envoy they have diferent headlights, and should drop right in to a Sonoma. Also some are hids.

Built2Bend

I don't know if you've seen this but it's pretty cool. Home made RTT My only wonder is how it's holding up.

http://forums.offroadtb.com/viewtopic.php?t=2008

Built2Bend

That's a good point I dident think of that. I'd like to do a era but I don't think I have the skills to do it.

Built2Bend

Welcome

Ya I've noticed the same it looks like this forum is slowing down but then there's people like you and me who are new to keep it going. And some people are still around. But most. Things seam to have been covered

And your luck it's from up here and no rust! That dosent exist. Haha

Built2Bend

If your door still hits it I would put door pins and bushings in first or you may destroy your new one.

Built2Bend

I'm pretty Sher the 2.5 rough country lift will fit I've seen others do it but haven't my self. (If you buy this kit on YouTube there's a pretty good video that explains how to install it) https://m.youtube.com/watch?v=snEF7DjVrkU If you only want a couple inches of front lift I would just Turn the ...

Built2Bend

First off welcome to the forum. Now my truck has the exact same problem but mines on the driver side it looks to me like the door Bushing went bad and alowed the upper corner of the door to his the rubber and cut it. Now the only place I know to get them other than a dealership(if they even have the...

Built2Bend

Do you have acces to a diagnostic scan tool? Plug it in and moniter the wheel speed sensors when the abs in kicking in that will atlest narrow down to one corner of the truck where the problem is. Dealers and some indipendent shops could do the same test. But will charge.

Built2Bend

Ya I will have a friend do the welding (I can only half a** stick weld). But this way there's no worry of finding a led bar to fit the distance. And I can use some as ditch light adjust some closer to truck or farther out. Exc exc. And the rough country brackets are cheaper than most but still expen...

Built2Bend

Now I'm gonna share an idea I had what if I take the 07 silverado like the above picture and weld a rolled piece of tubing to if that will match the curve of the windshield then cut the mount down to fit the bar better and trim it up so it looks clean. And mount 10 of these cubes to it. It would be ...

Built2Bend

I would just try and find a g80 disk brake rear end with the same gear ratio as you. Or you will have to set back lash and buy a shim kit. I don't think you'll have a problem useing a diferent pinion as long as it's the same gear ratio. The wear pattern should be very simalar from the factory. But y...

Built2Bend

If I'm not mistaken there's a thread on here where someone took a rack off a 98 blazer and said it went right on without modification. Can't remember who it was.... I think I read that also. But I was told it's easy to cut them down. So it shouldent matter to much. http://s-10crewcab.net/forums/vie...

Built2Bend

Also one more this looks like it could be mounted any where.
http://bumpersuperstore.com/i-19200550- ... oC1yjw_wcB

Built2Bend

Here's one I found not quite like I explained but this could work even better. http://m.ebay.com/itm/191195272941?_mwBanner=1 I'm not sure how the s series roof racks are but this is a great idea. And could possibly work. http://www.purefjcruiser.com/light-bars-mounts-kits-c-14/50-led-light-bar-moun...

Built2Bend

Ya those are great. I'm not in Instagraham. But I don't like how high the red one is if I did it like that I'd mount it level with that bow and sit in front of it. If that makes any sence. But I like that pewter one most. Maybe if I could get a bent type led bar tho it would fit closer to the top of...

Built2Bend

I was thinking if I get some, try to put one in between the roof rack rails, try to keep it tucked below the top of the rail. I have a topper, and I pulled a rack off a 2 door blazer to put on the topper. I just picked up some nutserts to use with the stock bolts, I'll grab a pic and the part numbe...

Built2Bend

And the quality is good? Wow that's really cheap. I've been looking at Cree light bars but even then there still 200+

Let us know how you decide to mount it.

Built2Bend

Oops zr2forum my bad. But here's the link.

www.zr2usa.com/mboard/index.php?showtopic=53375&page=3

I've wanted to put a led bar on the roof for a while but I'm to afraid to try and fab one my self and no one makes one.

Built2Bend

In s10 forum I believe. (I'll find it in a minute and link) it has a thread if people showing where and how they installed them.

Also I'm curious what brand of led bar did you get and if you don't mind how much did it cost thanks.

Built2Bend

Ya I really have considerd moving south or west to get away from it, my first s10 frame totaly rusted almost completely in 2, My 2nd s10 is currently rusting the same way. And my crew is trying to. I HATE salt!!!!! :twisted: :x :twisted: :x I'm considering buying those doors my self just for back up...

Built2Bend

Also t for got interior picture.

I'm sorry but I haven't figured out how to fix it curing off my pictures.

Built2Bend

http://i1376.photobucket.com/albums/ah5/Austin_Tomecko/Mobile%20Uploads/image_zps399857eb.jpg http://i1376.photobucket.com/albums/ah5/Austin_Tomecko/Mobile%20Uploads/image_zps3a8bf30a.jpg http://i1376.photobucket.com/albums/ah5/Austin_Tomecko/Mobile%20Uploads/image_zps5dfe868f.jpg http://i1376.phot...

Built2Bend

I just want to let every one know there is an s10 crew cab at my local pick n pull. the rear doors only have minor surface rust. The cab and bed a pretty much shot. When I was there yesterday the engine and trans were gone. But the transfer case and drive shaft are there. The interior in complete an...

Built2Bend

We'll I figured I better put in what's going on. I now have a new pitman and idler arms. So soon I hope to install that. But I also noticed my inner and outer tie rods airnt looking to good so those will be needed soon :rant: after that I'll align it and mount my new to me tires. (My fronts are pret...

Built2Bend

Yes all crew cab s10 doors are the same.

Built2Bend

Darn. I was just in Georgia less than an hour from Alabama. But if you could pay for the door and shoping and a little for my time and work I'll send it to you but I don't think it would be worth it. Good luck and car part is a good site I use it a lot.

Built2Bend

Henryj Thank you for moving this. And I also would have heated up and moved the front lowers over to fit better. Hartleybl let me know how it goes. If I could find some some cheap used ones id try it but they just cost to much to try and buy new and make it work. Maybe some day I'll find some at a p...

Built2Bend

Hello I hate to start another thread about flares becoulse there's a lot of them :nono: . And most go no where :cry: but I saw this on craigslist and I think it may be the first attempt I've seen at I think f150 flares on a s10. I'll post most of his pictures and a link to the add. Maybe some one he...

Built2Bend

Also welcome.

Built2Bend

My local junk yard has one I haven't seen it up close I believe it's tan. But am insure of condition. Tho your front doors are the same as any s series. I don't see your location. So I'm not Sher if your close to me or not.

Built2Bend

I'm just throwing this out there. But isent the speedo on are trannys I know the 700r4 is but they may have changed it for the 4l60e. My question is could the speedo be reading wrong. And jumping every where and after the PCM sees the speedo freaking out goes into limp mode becoulse it thinks some t...

Built2Bend

There's a milion ways to do it. I've seen a photo chop of a crew where he planed to move the wheel well back 6inches and I guess if you did that it would be easier. I believe part of the problem is with the flares hanging over in to the gap between the cab and bed. So it would fix that. But it still...

Search found 160 matches