S-10CREWCAB.NET

Warnoffroad

i bet right at 2 grand depending on what all they have to replace. The rear pass side door on my F-350 was hit in that exact same spot, only a little bigger with white marks paint marks on a black door :twisted: . i was givin $2300 to repair it, luckily a buddy of mine owns the biggest body shop in ...

Warnoffroad

How have yall been? just wondering, has anyone seen my old ZR5? Good, glad to see you still drop in from time to time :thumb: I haven't heard about it in quite a while. So far I don't think any of the previously owned trucks have ever showed up back here. ya, I was wondering where is was even withi...

Warnoffroad

That drawing looks like somthing ive seen b4

nice drawing

How have yall been? just wondering, has anyone seen my old ZR5?

Warnoffroad

chumley wrote:
plus it became a pain to drive
How do you mean?

Mostly just the rough ride got old pretty fast, hard to keep at highway speeds 75ish. Dont get me wrong, it was a blast to drive, just not as a DD.

Warnoffroad

gairbear wrote:what'd ya get for it man??? if ya don't mind me asking that is.

sold it to a local truck dealer/ebay car dealer, for 27ish if i remember right. it was put up on a lift out front for a little while, then that was the last i saw of it.

Warnoffroad

it coulnt pull a 20,000 dump trailer or a bob cat as well as the SD

. plus it became a pain to drive.

Warnoffroad

I was thinking of getting a super duty................................................ .......................................................................... :roflmao: :roflmao: :crazy: :crazy: :bonk: :bonk: :puke: :puke: :puke: then i sobered up. hey now, i got an 05 SD, its a good truck only ...

Warnoffroad

What t-case are you planning on getting since the front diff is passenger side drop? or does he not plan on putting a t-case in it? That looks great by the way, mine isn't that pretty :( nor do I ever plan on it being that pretty :D Thanks a ton! I saw the axle swap done on yours, looks awsome!! ho...

Warnoffroad

First off.......................welcome back :thumb: Secondly, I was a little confused on exactly what you did. If I understand correctly you put the S-10's cab and bed on the K's feame and running gear? if your saying that it looks so good it almost looks factory, thank you :D also the blazers on ...

Warnoffroad

I put the old 1/2 ton axles under a friends s-10, the K5 is hole nother toy.

Warnoffroad

Thought Id show yall this new truck I just did for a guy last week its a 2000, 4.3l, 2wd, 3/5 drop, flow master duals 40 series, intake, 2 8" subs, 1200 watt amp, 8" tv, and some other goodies inside that i dont know what they do. I fully rebuilt my old 79 blazer 10 bolt fornt and 12 bolt rear end, ...

Warnoffroad

bad bowtie wrote:Here is the web site page.

Looks like they took of those stupid swamper STS i had on there on put on some good meats

Warnoffroad

he should have left it like it was when he first did the SAS.. He had 35's and an axle under spring up front. Truck was maybe 6-10" higher than normal and looked really well built and street worthy.... http://www.imagestation.com/picture/sraid71/p74c2295c38a16daf162ce79add4a0e07/fb9a1052.jpg had ab...

Warnoffroad

truck was built in florida and is now in wisconsin... I know that truck gets alot of praise on this site but why would the 2nd owner (from warnoffroad) trade it in that quick? It, to me isn't an everyday practical driver which targets alot of customers. It should be sold in TX or FL. I doubt the gu...

Warnoffroad

truck was built in florida and is now in wisconsin... I know that truck gets alot of praise on this site but why would the 2nd owner (from warnoffroad) trade it in that quick? It, to me isn't an everyday practical driver which targets alot of customers. It should be sold in TX or FL. I doubt the gu...

Warnoffroad

ys he selling it?

Warnoffroad

2bunik wrote:at least it wasnt a FORD... (a2b)

hey now easy on the fords, i switched over myself

, but i still got the blazer

Warnoffroad

but now that you are saswapped you dont have a problem anymore?? or did you take the hedge trimmer to your fenders WAS :wink: trucks gone :cry: , it was only on 35s for a month or 2. It could have cleared 44s with ease for mostly street use. haha the ol problem solver! nah, it would scuff a little ...

Warnoffroad

malkavian wrote:holy cow Well That ought to be enough to keep people away from that. You tore the front diff out of the mounts?

hell ya, but again that was with a set of brand new TSLs and a heavy foot on the rocks. It was great for street, drove like stock.

Warnoffroad

Warn, I want to know how you fit 40's in your wheel wells when you flex out. Or do you have some super duper bump stops before it gets to that point. My 33's stuff so hard in the rear that the one that is stuffed wont spin :roll: but that is when I am totally flexed out. be careful. get some stops ...

Warnoffroad

Warn, I want to know how you fit 40's in your wheel wells when you flex out. Or do you have some super duper bump stops before it gets to that point. My 33's stuff so hard in the rear that the one that is stuffed wont spin :roll: but that is when I am totally flexed out. It sat so high over the tir...

Warnoffroad

malkavian wrote:what were the pops?

both CVs exploding, and the diff being torn from the mounts.

Warnoffroad

bubaloo1983 wrote:yeah the fenders measure with the cuts about 38 inches across.

arent they normally 31"?

Warnoffroad

While i was just looking around the net for some other lift options i remembered that truckin suspensions made a 6" lift for our trucks. I went on the site and it says 1995 - 2003 CHEVROLET S10,S15,BLAZER,JIMMY LIFTKIT 6.5" BL9503 S10 FRONT/REAR Body Type: SUV Wheel Drive: 4WD .... Would this kit w...

Warnoffroad

What is the backspacing on those wheels?? 4.5 I dont think I want to go bigger b/c my 33's do NOT fit in my rear wheel well and I do some hardcore wheeling. Once my ifs hits the Sh*ts im ganna go sfa. Yea, that's my thoughts also! But I really don't want to start my SFA project for another 2-3 year...

Warnoffroad

that makes sense...35's should fit almost with fender trim and 7" of lift...get em' :D :o wow, you must have a LOT of fender cutting to fit 35s. I had the exact same 35" MT with 12" of lift with trimmed fenders, and they would rub a little turnin up curbs. :shock: but hell if they fit, good luck!

Warnoffroad

I put the charger on after the lift and 35s and it still made a nice difference. I hope to change the gears after the first of the year to 4.56s... 4.56 :shock: i heard they stoped makin those because the teeth were so fine they kept breaking. I ran 4.11s with 35s with just exhaust and intake and s...

Warnoffroad

When unlocked, it works like a torsen type diff . ....... and mabey the tcase too :shock: i was wondering about how much a case can hold, chuck and my buddy that owns jeepersden say that if your running low enough gears you shouldnt have to worrie about drive shafts or the case as much. I too was w...

Warnoffroad

GaryH wrote:
Warnoffroad wrote:I dunno, you can still see into the window. Make it taller
Wouldn't window tint be easier?

yeah but not as fun!!

Warnoffroad

HenryJ wrote:

I dunno, you can still see into the window. Make it taller

truck looks awsome, i wanna see those falres.

Warnoffroad

KCustom wrote:Just got back from the S-Series finals...It is official, We one "Best of Show", "Tallest Truck" and "Most Unique Modifications" awards...Thanks to all on the Forum for the great advice and help...

hell yeah git r done!!!!! congrads!

Warnoffroad

wow. i am really confused about what yall are talking about... :lol: so ya, the truck looks killer...but ummm...i am concerned about cornering and bumps and stuff like that. i used to wheel with zr2's who had the 2"BL and the 6" SL and they would rub on their rear fenders which were 33" openings an...

Warnoffroad

HenryJ wrote:IMAGE

All steel, a friend has plans for it

plans as in 2.5 tons and tractor tires, or a 572 big block?

Warnoffroad

HenryJ wrote:
BowtieZR5 wrote:what do you want for the CC?
Check the Classifieds- up for grabs (thats right shes for sale)
Warnoffroad wrote:...I dont know? but it'll prolly go for 33ish

i wasw out of my mind, ill take 27k

Warnoffroad

8" of lift vs 18"

Warnoffroad

Superlift= 1600 labor=500 body lift=120 labor=300 total=2520 SFA conversion from fabritech=4000 The difference? Priceless! Just my thoughts. Brad dont forget that 4200 front diff repair bill after one of ur fist hill climbs with 31s :? fabritech= bs, those people are too cocky I love our trucks and...

Warnoffroad

GaryH wrote:My first try zig-zagged all over the place

thats happens to on every cut

Warnoffroad

2bunik wrote:my buddy says he uses a 2x4 dont know how effective it is but it works for him..

sounds like a great idea, wouldnt the 2x4 light up

Warnoffroad

update done, 8" lift 40" iroks

Warnoffroad

how much would it cost for a custom job and would i have to do it all in one session or could i do part by part. i don't do much off-roading but want the look of it. in the little bit of off-roading i've done i've noticed that i need more clearance. im in fort worth texas for those asking. or save ...

Warnoffroad

and some where out there is a 50 cent coin or something, because i know they arent talking about more then one

Warnoffroad

HenryJ wrote:
2bunik wrote: warn is 17.. where do u work?
Mows lawns

ive also lifted a few trucks for some of my dads buddys.

Warnoffroad

HenryJ wrote:
Bad_Ass_S10 wrote:what truck are you putting an 8" lift under???
Older fullsize Blazer.

Warnoffroad

I tryed that and you have to call

, I hate talkin to off road people over the phone, they just end up pi$$in me off. I went to 4wheel parts monday and ordered a 8" superlift, he said they cant stock BDS because their insurance wasnt good enough or something.

Warnoffroad

BowtieZR5 wrote:Bad_Azz and Warn...
what kits do the two of you have on your CCs? and where can i get them? or is it all custom?

ya ya ya i know im a newbie

everything from the doors down on my truck is 100% custom, and about 11 weeks worth of work. bada$$ is the same only with out the second t-case

Warnoffroad

now they have dropped all of their gm ifs kits I was looking around doesn't any one make a kit that is completely bolt on (no cutting or welding on stock parts) I want to go with 32s and if I'm going to be cutting and welding I might as well build it my self or go sfa and go real big You're correct...

Warnoffroad

quickbiker wrote: LOL, I feel better now! Goes to prove that S-10 Crewcab owners are either young or young at heart.

17!! i guess im just a youngin

Warnoffroad

I got a millermatic 210, a miller 135 and a miller 375 plasma cutter. The 210 is AWSOME you can cut into anything with a double pass, and the 375 is too much of a pain. i'd say you are on crack now...i would give anything for a plasma cutter. i just spent 3 hours with a blow torch sunday cuttingo o...

Warnoffroad

SWEET TRUCK, I HAVE A 2003 PEWTER SONOMA CREW AND WANT IT TO SIT LIKE YOURS, I WANT 5-7 INCHES OF LIFT AND WANT TO RUN 18X8 RIMS ON A/T'S, MAYBE A BODY LIFT AND SOME THORNBIRDS LATER BUT THAT STREET 4X4 LOOK IS SWEET! WHAT LIFT DID YOU USE? WHAT SIZE RIMS AND TIRES? BACKSPACING? ARE YOU RUNNING SPA...

Warnoffroad

I was lookin to see what new stuff "truckin fall apart on the trails suspension" had out and they have a 9" kit listed but it says its not going to be available? That kinda sucks? i just wish they would come out with a 18" IFS kit for our trucks like they did for the HDs, i would have to weld the st...

Warnoffroad

Ok, after getting a really bad case of sticker shock looking at SFA conversions, I've decided to do what most S-10 owners have done for their SFA's and just do it myself. The questions here are for anyone who has a welder. What kind do you have and where is a good place to get one and how much? For...

Warnoffroad

AZS10Crew wrote:These should prove your point...

tell him shes 6 feet tall

Warnoffroad

Where online can I get a BDS lift kit? Ive checked four wheel parts, sams, national, rocky mountain, and some more but I cant find anything.

Warnoffroad

the first that thing k-5 owners do is swap for dana 44 and 14bolt out of a 3/4 ton chevy. they will be the right width too. then at least you will never brake your rear. the 10 bolt is weaker than the toy front, and the toy front cant hold 39's.... I found out today that i do have a 12 bolt rear :D...

Warnoffroad

Im going to wheel the crap out of the thing. Im so glad i got the 400 tranny. When i went to get tranny service kit i told the guy i had the 350, but the filter didnt look the same and the gasket was a little too small. so i went back and got the 400 kit and it fit. Ive found 3 or 4 12 bolt rears im...

Warnoffroad

well i got a 79 k5 blazer on 33x12.5 bf ats and a warn m8274 winch this weekend. Its got a 350 with a turbo 400 tranny, and runs pretty good all for 2500. outside is nice, and the inside is very clean, only needs seat covers up front and then it would be like new. http://www.imagestation.com/picture...

Warnoffroad

Your site is in high demand! Mine did that too on those free sites when I was on them. I guess that's how they get you to pay. lol. I bet it looks sweet! Did you have to trim much and if so, I would like details of that! looks sweet!! the cap makes it looke like a silverado. doesnt look like he has...

Warnoffroad

quickbiker wrote:Busted my rear shaft over the weekend, I've already got my yoke in the mail to Woody! I'm getting a steel shaft this time.

what did you do to break that

i couldnt get mine to blow with 40s

Warnoffroad

a2b wrote:ya...its gone just build a square one...who needs balanaceing

y not fence post

Warnoffroad

KCustom wrote:Mike told me that there will be a front stainless skid plate and double shock hoops. I am also hoping that there will be traction bars. I have a feeling that I will need them with the supercharger....

you shouldnt have a problem with a block thats 2"s or smaller.

Warnoffroad

thanks mark! :D No problem...I know all about your wheels and tires since they were almost mine once. :) oh ya i forgot about that... ya i just got in my second pair of black crawlers. this time 6 on 5.5...i just got thru sandin the paint off the edges for the beadlocks :D weld on beadlocks? let me...

Warnoffroad

im in for a set, all he really needs to make a set of rears to fit our trucks. the bushwakers fit the front great, or so I hear from HJ

Warnoffroad

Is there anyway to take them out? :oops: I can't tell. I'm trying to attach some dvd screens to the seat and it requires removing the headrests. I don't see a button and I gave them a firm pull but they didn't move. :? I don't want to break/tear anything...so I figured I'd better ask. I also have l...

Warnoffroad

If your going to do that I would get a ZR2 bed and front ZR2 fenders

Warnoffroad

45x50 surco

Warnoffroad

im sure you can get the ZR2 blazer mount to work, seems like the only difference in the back of the the 2 door and 4 door is the rear window angle.

Warnoffroad

But thats not as fun

Warnoffroad

HenryJ wrote:
dew33 wrote:... What would be the best route to take adding a 2' suspension lift or body lift?? ...
SEARCH

a 2' (2 foot) suspension lift would definately be bigger that the Nissan

Well if you think about it he wouldnt need park NEXT to the Nissan

Warnoffroad

Good luck, he's got enough problems with getting the ZR2 flares out, much less re do an entire rear set. You can fit 35s with cutting on the fire wall, 33s would be a perfect fit. The flares make the front fenders 37"s and the rears 36"s, but with our trucks huge front fenders and small rears (maybe...

Warnoffroad

I am going to....I can always pull more. It helps to have a vac former in my r&d area... think that I may pull them from .250 abs instead of the .125 that bushwacker uses. Sounds good, when do you think you will have them made up? How much do you want for a set? Also are you going to make them a 1....

Warnoffroad

KCustom wrote: I have seen here that the rear flares do not fit very well so I am going to make a new mold and form a set that fit the truck.

make more then just 2 flares!!

Warnoffroad

2 weeks ago when I was looking for bars I could really pic a set either. So I spent a weekend playin with some toys and built my own, they cost about $100 (bushing kit was $65)and came out like a pro built bar. I use to have alot of axle wrap, but yesterday I got a set of TM AALs from Mike H, which ...

Warnoffroad

howdy! Call Truckin back and tell them they suck!! I put the kit on at 1700 miles then pulled it off at 4300 becuase I was working on it every weekend, and then the front diff blew out which was a good 4200$ fix. Honestly, go TM and have a shop do it, so if something does go wrong you'll have someon...

Warnoffroad

warn....i am assuming you have custom lifted springs...if so, regular AAL's may not do the trick... They are 3 deeper then stock, but im kinda lost now. Mike says the AAL is 2 1/4" wide, so im guesing the leafs are too. My leafs are 2.5, but i know they are stock width because my daystars were almo...

Warnoffroad

quickbiker wrote:Hey Warn, someone took your icon.

i tryed to change it but the new one wouldnt load, then i tryed to go back to my old on and it wouldnt load again

S-10CREWCAB.NET

Search found 468 matches

BACK with a new build up on an s-10

Re: Truckin suspension lift

Re: I put the ....

Re: just got back...

Re: Willys

Re: Welder question...

Re: Bad_Azz and Warn

Re: Welder question...

Re: KCUSTOM! SPECS?

new 9" kit is out but not

Re: Welder question...

BDS lift kits?

the new project

Re: Busted my rear shaft, time for another Woody!

Re: SuperLift

Re: Front Seat Headrests??

Re: rear flares....

Re: That would be great...