S-10CREWCAB.NET

philippe

just to get clearance to safe it

philippe

do some body did a lift to their gas tank after a body lift ?

philippe

ok thanks ,but i change my t bar keys and i forgot to take the eight before doing it.now i want to know how it krank the front of the truck compare to stock keys.

philippe

does gm 1500 truck (2WD)will fit???

philippe

i want to know what is the height from floor to fender on a crew with 2 in.body lift and t bar cranked on 31 in. tire ?

philippe

what GM model has the same bolt pat. and center hole than our crew?(B.C=4.750 center hole=2.750)

philippe

cool!thanks to the tech. info for tighten the stering box.i know that my ball join,idler arm and pitman arm are good,i will try to tight the stering box and give a look to the stering colum but how join we have on that colum? THANKS

philippe

i have some loose in the stering weel(right to left)i think it's the stering box.does it have someting to do to corect that or i have to change it and if so,does someting stronger can i put to fix it.THANKS

philippe

does any body try the front drive shaft of synergy off road? and what hapen whit the slip woke in transfer casse if it has one slip on the shaft?

philippe

http://www.jagsthatrun.com/Pages/Parts_ ... r-134.html take a look there.they talk about fan clutch swap.

philippe

do zr2 fender flare will fit directly to our zr5? (it 's wider than our's)

philippe

i just order a st of weel spacer from matswheel@hotmail.fr and it's cheap.fast service

philippe

do somebody have plans for 6in. lift kit?

philippe

i am in quebec and i just order a kit.the seeler is quebecor to.look at http://www.matswheels.ca/ he seel mag and tire but he can have spacer to.

philippe

good stuf! it look like a 82-93 shaft ?does it is the same thing????????

philippe

where can i find the sliding yoke(in transfer casse)with cross join to do the mod? here all auto parts i checked can't help me.does this can be the same thing than the rear sliding yoke???????????

philippe

i mean wider like a zr2.i know that the front is wider then the rear on our zr5 but if tony put zr2 rear axle can he do some thing to wide is front.

philippe

if you just turn the keys,what's the boise spring kit?and what front end problem could hapend if we change the keys?i know ball join and axle boots problebut i tough if it 's posible to lower the front dif to corect the axle binding???

philippe

cool! zr2 axle 4'' wider good thing to know but did i can change some thing to have the same 4'' wider in front ( no wheel spacer )

philippe

i just bouth a chevrolet venture,it's a 3.4L and has double electric fan.it's a flex style blade and i thinking if it's puling ennough cfm for a 4.3L? I think it could be easyer to fit than a ls1 style.

philippe

cool but what did you do with the homocinétic join?

philippe

i did the suport that we plug in the hitch and i did that in two pieces to be able to put a long section that come to the same high to the roof rail. than i can suport long piece of wood or boat.

philippe

i have rancho 5ooo on my cc and it's good shocks stifer than original,but the eye at the 2 end dont fit perfectly whit the tab and frame atachement.it could be beter whit shims and mabe a sleeve betwin the eye and bolt.whitout adjusment it sound loose.

philippe

did some body have done a modify for the front drive shaft? I mean replacing the homocinetic join by a (cross) join like the other end of the drive shaft.

i think mine start doing noise when i put it i 4 w.Thanks for help and other idea.

philippe

what do we need (parts) to put a solid front axle.and is it posible to find all parts in scrap yard?if someone can help me i am very courious to know if it's rely more expensive than a ifs lift kit?

thanks.

philippe

hi.what do you think about the B&M shiftplus electronic shift improver?i saw it on synergy offroad.does it rely have no danger for trans?

philippe

i bouth one from rancho (not instal at this time)and the guy at the store give me the same part # of the front chuck with two eye end.

philippe

ok that's something cool to put a 350 into a cc.to find what parts is direct bolt on and what need adaptor,does it have a list of all parts of our cc.i have a 2002 cc whit ZR5 pacage and i dont know what is my transmition,transfer case,diff.and all others.for the up grade of motor,i red in the four ...

philippe

cool!you guys are verry funny.but i think i write english bether than you in french,it was dificult to understand.lol lol

philippe

thanks for fast reply.now a can start looking for parts.

philippe

i want to change my mecanical fan for a electric one.i red in a forum that i need a LS1 electric fan but i dont know what year,model,if i need the fan shround,thermostat, senser or someting else. :?: if some body can give wiring plans to know how to plug all that kit it will be very helpfull. :D THA...

philippe

SORRY.i am french (quebec) and i mabe scrap some words when i wrote but i verry like this forum.i learn a lot of thing for my cc.thanks to help me when i have question.

philippe

yes i think it mabe look good.tell us if it's a simple bolt-on or it need some mod.

philippe

did you see a change (hp or torque)after changing your trotle blade?

philippe

tanks for tips.what do you think about modifi the buterfly on trotle body.(change buterfly or remove the round thing bolted on it)?

philippe

thanks i will look that and tell you if i find some fix to do.

philippe

i dont know,i smell it as i go out of truck but dont know where precisely.

philippe

i am looking to do a home made off road bumper.i saw the one of goergesblazah and it look good.if some one can give some pics of their's and mabe plans for home made ones it could help me.thanks.

philippe

when i go for short run in town (put kids to kindergarten)i smel ruber.no tire rubing,no mud flaps rubing(it's off),and i have the original spare tire(not 31'').does it hapen to some body?

philippe

i think to put a k-n filter and look to the mass air flow and it look restrictive.i tought to replace it but the after market is costy,i tought to put a larger one from a larger engine (use).couldit be a good idea and mabe the same thing for trotle body?

philippe

i have a cc2002 and it's a daly drive truck.i want to change muffler to have more exterior sound and power.i taught to put a magnaflow catalytic converter,a flow master series50 for lower interior resonance or a cherry bomb trush for it's low cost and it did good on a dodge of a friend.what do you t...

philippe

you can try to heat very high the bolt with torch and cool it very fast with wather.the nut will come a litle bit smaller cause to the heat treatment.put oil and you can try to heat the nut ,it will come biger when hot then try to un bolt.

philippe

i have the 2002 cc and bouth it at 35 000km.the fuel guage was bad,i send it to gm dealer,they change some pieces and didnt change my truble.when my guage show me empty i put it on park and see the level go up.

philippe

my tire are X-treme avalanche M-S.its make by Hercules.

philippe

i have avalanche snow tire (31/10.5/15).i vrey like it,it has good traction on ice to.this week i pull out a 3/4 tons out of snow bank after a another 3/4 tons tried and didnt .i am in abitibi-québec and we have a lot of snow here.(2 in. body lift to stop tire rubing)

philippe

tanks for tips!i have 2in. bodylift , cranked torsion bar and add a leaf spring.where can i order a 6in super lift at the best price?tanks.

philippe

sorry i am a french men,my english is not so good!!! i want to lift my cc 2002,6 in. on suspention should be nice but to expensive for now.i tink to buy torshion bars keys,they said it s good to lift from one to tree inches.it is a good thing(c.v join),do i have to change my chuck(rancho 5000)tanks ...

S-10CREWCAB.NET

Search found 47 matches

gas tank lift ?

Height after lift ?

what wheel fit ?

steering box

front drive shaft

ZR2 fender flare

lift kit plans

front drive shaft mod.

solid front axle

B&M SHIFTPLUS

radiator fan

off road bumper

ruber smelt

replace mass air flow ?

trush or fm50series

torshion bars keys lift ?