S-10CREWCAB.NET

WVHogRider

Sorry for the late reply guys, as I've been away camping, and just too busy to get around to the site. I got back to some of your PM's about the programmer. I'll list it in the Classified section along with other stuff I may find/have. The HPIII is PN# 30023 for '01 Chevy's (4.3/4.8/5.3/6.0/8.1L eng...

WVHogRider

F9K9 wrote:Do you know what a Rottweiler and a Harley have in common?
.
.
.

They both ride around in the back of pick ups

J/K....You know I'd always

with you.

WVHogRider

...my friends keep telling me to quit calling the Sub my new truck because it's not a "truck". I've always called SUV's trucks. As long as they aren't luxury SUV's. :roll: 14x4, I'll let you know if it's the HPIII that is compatible with your truck. I'll make you a good deal on it if it is. :thumb:...

WVHogRider

Well ya, go ahead, you can definantly get that Harley now. You have enough engine to tow em all over the country!!! :?: Ummmm, but I don't tow my bike(s) anywhere....... :wink: I ride mine where ever I want to go/take it. It's actually only been towed once and that was due to a dry roughted vacuum ...

WVHogRider

Never !! Find a reason to sell your Harley !! :rant: Them's fightin' words---> :punch: :crazy: :eyes: I'll NEVER sell my Harley!!!!!!!! Actually, I'm looking to add another Harley. :mrgreen: Oh, and my friends keep telling me to quit calling the Sub my new truck because it's not a "truck". Yeah, th...

WVHogRider

:surrender: I gave up throwing money at the crew. It just needed too much work, and couldn't do everything that I now wanted/needed. It was an '01 with 146,XXX miles with a bunch of issues starting to surface. It was a great truck, and fit the bill for everything I needed at one point. I'm truly sad...

WVHogRider

stock radiator crapped out yesterday @ 110k miles. Looks like it cracked somewhere in the upper drivers side, on the front side of the rad. Funny thing just happened to me yesterday. The stock radiator just went out on mine @145K in the same location. Anybody got the part number to the upgraded/ove...

WVHogRider

Good luck with that

F9.....Been there done that.

WVHogRider

We all have to remember that not all trucks rubbed with stock tires or even the larger tires with no lift. I ran atleast two sets of 30x9.5's without hitting and no torsion bar crank or Boise kit. I recently got new tires and should have seen if I could have gone with 31's since I've done the crank ...

WVHogRider

From the Tire rack site: " The tire's internal structure includes twin steel belts (some sizes reinforced with nylon) on top of a two-ply polyester cord body . I didn't dig into the construction all that much. The place I go knows tires. It's a little mom & pop shop that I've dealt with for years. I...

WVHogRider

I know this is an old thread, but I just wanted to give an FYI. I just got new tires last week. I went with General Grabber AT2's in the 235/75/15 since they didn't have the 30/9.5 size, that I usually get, in stock. They are designed after/like the BFG AT's, but less $$$$, which is good. We just go...

WVHogRider

You will find similar problems in the GM fullsize. Maybe try another brands problems? That may be true, but a full size is needed ....remember I have a 20' camper to haul during the summer & the CC was having a pretty good work out while hauling it. I could also use the full size bed for hauling my...

WVHogRider

I've got my eye on a couple newer full size Chevy/GMC's at a local lot.....I can't afford new right now. I may ride the CC through winter, but that may be it for the CC. I now have the GF moved in & she's paying some of the monthly bills, so a "new" truck may be doable by spring.

WVHogRider

What have I done to the crew today?.......Stopped by a car lot to see how much I could get for it! :shock: Oh, and I'll be stopping on my way home to get another set of headlight bulbs & door pins. This thing just got about $500 worth of parts put on it not even 4 months ago, and it hasn't even been...

WVHogRider

You want the HPIII #30019 for your 2003. Here's two on Ebay for around $200 shipped:http://shop.ebay.com/i.html?_kw=hyperte ... g=&_sop=12

WVHogRider

There's still a bunch on the road around here. I seem to pass atleast three or four on a regular basis heading to/from work, and numerous other ones just trolling around town. However, none of them seem to get on here.

WVHogRider

I'd just pony up the dough for your own Hypertech programmer. That way you can change all the settings as you wish (top speed, tire size, octane rating, etc), read & clear DTC's, and etc. That's what I did. I got a used one from one of the members here.

WVHogRider

Hog Man, how's the riding weather in WV? My bike has been put up for the summer, too damn hot!! Let my bike sit in the garage for a week without riding, and the battery went dead. Only a year old. Can't wait for winter, that's when AZ is riding country again. :shock: Too hot to ride.....Blasphamy! ...

WVHogRider

I know where you got that, and I found funny as all get out over there too! :wink: I thought about posting it over here. 8) I get my daily fix "over there" too :o And you respected Border Man's seniority. Wassup with the sudden reemergence? Between GFs or did you lay it down? Not that I would know ...

WVHogRider

My lights have been on for a while too. I also changed out both wheel bearings and nothing? I was considering looking for a rebuild place, as the 2000 model year is not interchangeable, and I cannot find a 4x4 near me. You may be able to find some cheap ones on Ebay, or spend the $130-150 at ABSfix...

WVHogRider

WVHogRider wouldn't even be able to guess what I was riding after getting back to the world. Gave it up after 12 yr old kids, whose bones didn't break, beat me on a regular basis in my CC class. Hijack over....lol http://motorbike-search-engine.co.uk/classic_bikes/1972_bultaco.jpg Um, I'd say a mid...

WVHogRider

I have to remove two large skid plates, the oil filter is in an extremely awkward position, and where the oil drain plug is, it sits right above a cross member so oil goes all over the place when you take the drain plug off! Find one of those Fram Sure Drain plug drains! It's a valve/hose assembly ...

WVHogRider

Good to know. I'll keep that in mind. Well, I was hoping it would help someone out in the future. I kept looking for a Kelsey-Hayes with the HD barcode lettering, or the same style with the bar codes that matched, as there's two bar codes on the electronic portion of the unit, ( Go figure mine says...

WVHogRider

OK, so not to start a new thread......Warning: Long post. A while back my dash ABS & Brake lights finally stayed on, & I had to remove the ABS fuse because the ABS motor was continuously running. So after riding around with the lights on the dash & fuse pulled for more than a few months, I decided t...

WVHogRider

I know where you got that, and I found funny as all get out over there too!

I thought about posting it over here.

WVHogRider

Go big or go home, I say. Nice.

WVHogRider

Is there any good resources onoffroading in general? Like how to drive in mud, climb steep hill in various conditions, etc, etc? Fall......You live in WV! You should have plenty of experience wheeling in mud & climbing steep hills. :lol: Kidding of course, I know not everyone gets the same driving ...

WVHogRider

I was avg'ng about 14 for mixed highway/city mpg and 18 or 19 mpg for strictly highway about a month or so ago on a trip to the coast of NC & before my delayed tuned up.....

I'll have to check in the next couple fill-ups.

WVHogRider

I'll be towing my 20' camper next weekend. I'll have to see about the GF getting some pics of the truck hauling it down the road. It's about a 3 hour trip to OH amish country where we camp, (Danville/Loudenville, OH). I already have the trailer brake controller, and I'll be installing a trans cooler...

WVHogRider

Speaking of grills, here's what I got about a month ago: http://www.tractorsupply.com/webapp/wcs/stores/servlet/ProductDisplay_10551_10001_106244_-1______%7C14442%7C106244?listingPage=true&Special=false Propane side, charcoal side, and has a smoker attached to the end that you can also grill in. :ea...

WVHogRider

I can't believe I haven't posted in this thread yet. Yeah, you probably seen it before, but here's my prefered commuter:

WVHogRider

barch97 wrote:Isn't almost time to do it again?

Nope. It's good for another 125K.

WVHogRider

:bump: Well, to much amazement, I finally got around to putting all these parts on over the weekend. :rock: Here's the list of what I got done on the truck over the weekend: Oil & filter change, cleaned K&N air filter, lube job, tires rotated, brake fluid system flushed, new rear brakes, the "new" p...

WVHogRider

BTW, it's not joints that get sore it's the skin that get's raw. http://img125.echo.cx/img125/7155/attention9ha.gif Well, try using the edge of your pocket knife "carefully" along the edge of those stuck on clumps next time. I just loosen the edge of the clump a bit, then smoosh the edge of clump w...

WVHogRider

Original Cap, Rotor, Wires and Plugs. 128000 miles, tap the starter, it fires and purrs to 23+ mpg every week at 1000 miles per week. All I can say is THANK YOU GM !! 8) I am offering a RC Cola and a Moon pie as bounty on this dude! I have had all that I can take from him! Oh, so he gets an RC and ...

WVHogRider

Now Im reading on how to try and unlock the CD Player Andy Well, if the previous owner didn't write their code in the owners manual, or even change the stock code, on the radio, you'll have to call the MoCo to get the code to unlock it. I think we already had a thread in the past on that, but I'm n...

WVHogRider

I'd have to say it's the motor too. I had the exact same issue before when the truck was still under warranty. As stated, mine would only do this during a rainy time & or cold. The service department replaced the motor under warranty at like ~80K miles. Well, guess what start happening again on Mond...

WVHogRider

Ignore this man! He reappears each year when warm weather arrives. Do you actually think he will work on a mod or needed repair on his CC when it is warm weather and his HD is calling? Gimme a break! Ouch.....Hey now, I did do a quick oil/filter change, door pin fix, air filter clean, and a lube jo...

WVHogRider

Soak'em down & have a very large breaker bar on hand.

I had one heck of a time with'em putting on my step bars.

WVHogRider

I just posted this in the other thread....But if you pick a nice warm/hot day, you can spray the decal down with some WD-40 to help release the adhesive. It also aides in the residue that is left behind once the decal/emblem is gone. I used the WD-40, floss or fishing line, and a rag for the excess ...

WVHogRider

Any part store. It's the 3M red tape. Worse part is removing the old tape. Your thumbs will be sore for a couple days but, it is very doable! On a hot day, spray the old tape down with some WD-40, (or something first), & let it soak into the tape.....Doesn't hurt to have a beer & a smoke while you ...

WVHogRider

I have the same issue going on with mine. The passenger side flare has been sitting behind my couch since last summer when I ripped it off so it wouldn't be flapping in the wind anymore. Yesterday, I noticed the driver side mounts have rusted out. I'll be doing the screw method that Green02 mentione...

WVHogRider

HenryJ wrote:OMG We married the same woman!

Nope, one of you may have married my-ex.

Anyway, I'm keeping mine until it dies.....It's been 8 yrs now, and I can't afford a new truck, so it stays. Heck, I still got new parts that I bought almost two years ago that need to go on it.

WVHogRider

Hey, if there's beer involved.....I'm in! :wink: You like Bud Light draft or cans, as I got both. :D I've been ignoring/postponing work for lights on my CC's dash now for about a year. I'm almost done mod'n the scoot for the winter.....So I guess I'll be attacking the CC in the next couple weeks. :r...

WVHogRider

I'm currently using the Rain-X washer fluid and the Rain-X Latitude wiper blades. I really like both products. I don't even have to use the wipers half the time since switching to the washer fluid.

WVHogRider

Take your wallet out from under your right butt cheeck......There now the truck is level.

J/k, yeah my dad's old ZR2 always sat lower on the passenger side, and it was mis-aligned T-bar adjustments.

WVHogRider

Just drill the connector wire holes out a bit or replace with bigger connectors.....Or get the new bolts that HJ described with the one screw end that holds the regular cables to the battery & have an additional ternial on the end to add accesories. Replacing the battery-->~$80, Replacing the connec...

WVHogRider

I had an ABS light due to a wheel bearing going down the crapper. The light would only come on every once in a while, mainly on sharp left hand turns, and go off after a few minutes. Metal shavings were getting thrown on the sensor then get clean off somehow. Just throwing a thought out there, as th...

WVHogRider

Update.......New battery not needed. :D Apparently, the corrosion WAS the culprit, and the battery didn't get charged enough after the corrosion cleaning. Both tests showed that the battery was good, the alternator was charging at 14.5. As for the ABS motor......It wasn't 35*, more like 25*, and the...

WVHogRider

Steal the turkey baster out of the kitchen and suck out as much as you can , then refill with fresh. That'll only take minutes. Hide the baster, DON'T PUT IT BACK! and for heavens sake don't tell her I said to steal it! I will..deny, deny, deny! :evil: Brule.....I'd be stealing the baster from myse...

WVHogRider

If you haven't installed that cap and rotor, then I will probably guess that you have never changed the brake fluid either, right? Brake fluid is hygroscopic. Well, you guessed correctly... :oops: ....I've had the new fluid for longer than I've had the cap & rotor, but just haven't gotten 'round 2 ...

WVHogRider

So this morning at 6:30am and -4* temps, the truck decides not to start & I have a 35 minute ride to work for a 7AM start! :cry: Well, finally I get it started around 8:30 with a jump from a neighbor. So I go to work for about 2 hrs, and come back to work on the truck......Turns out both terminals w...

WVHogRider

$20 for a door spring tool.....

....I got my door spring tool at the local Carquest for $8.

WVHogRider

roadrunner Did you then get it hot by running the engine for a while before trying to remove it? They all seem welded until heated up. Then MOST of them will come out without too much effort. Careful not to remove too much skin by touching those hot pipes though. :wink: :lol: Yep, tried removing it...

WVHogRider

Well, guess what come on this morning......

Three months code free. Guess I jinxed myself. Haven't checked the code yet, but let me guess what will be there....

WVHogRider

Did you put some anti-seize on the threads? I didn't on the one that I've replaced, and it's about welded itself in the pipe.

And yes, I sprayed it down with some PB Blaster for several hours before attempting to remove it again.

WVHogRider

I don't know what's going on with my truck, but I haven't gotten the code again since my last post. It just comes and goes as it pleases.

WVHogRider

Who cares what the bed looks like under the bed liner ?? I like knowing I can throw most anything back there and not have to listen to it banging around against metal. It also washes out real easy and complete. It's not because of what it looks like, but rather making the bed last. Within two month...

WVHogRider

OK. So the thread is "CV Boot question"...So, what's the easiest way to change the inner boot? I've got the passenger side that rubbed through one of the seams and it makes a knocking noise when making a right hand turn at almost 80-90* turn into my lane. :?: Guess I have to pull that whole axle.......

WVHogRider

Yeap, be very careful removing the pan....I had to have my solenoid replaced, and I merely bumped it with the pan.

WVHogRider

Yeah, my passenger side flare came off last year or so, and asked for part numbers of those mounting brackets.....but nobody found them. The flare is sitting behind my couch next to the front door. The metal brackets are actually mounted with rivet type bolt & nut. However, all the mounting hardware...

WVHogRider

I've still got my 8.5 mm MSD wires that I purchased 2 yrs ago sitting in a box that has now been moved from my kitchen table to my basement "to do area" next to the other parts.

I just wanted to check out that 100K mile warranty that GM gave me...

WVHogRider

Yep, as you and Barch stated, it's probably the parking brake. :( Removing both rear rotors might knock off enough of the rust/groove line in the drum to make the squealing stop temporarily. :wink: I've been running without those shoes for the past year or two. Just got done looking up all the $$$ f...

WVHogRider

Yep, they came stock. Mine hit the junk yard about two months after I bought the truck and was replaced with Line-X.

WVHogRider

Well then...

..Looks like I might just throw some money at it & buy a new one....

....I'm as good with electronics as Reed is with waterfoul.....

WVHogRider

Two or three starts later and the P0442 code came back.

Brule....How do you test it to see if the valve is failing to close? Or should I just assume that this needs replaced.

WVHogRider

I have to agree with both bwenny and AZ!!!

WVHogRider

Oh....Check out the new sig "realization".....

WVHogRider

Does this mean I need to replace the wheel bearing????... Probably can I pull that wire-plug out that goes into the bearing & just clean it? Worth a shot of the bearing is good. Look for damaged wires too. BTW if the sensor is covered with black metal shavings, the bearing is bad. I have also run i...

WVHogRider

OK, so after cleaning the EVAP canister...I cleared the SES light DTC codes P0141, P0442 & C0221. So hopefully the P0442 code was fixed.. :roll: The P0141 is an O2 sensor Bank 1 Sensor 2, and all but one of those are original..(7 years old)... :oops: so they will be replaced soon..like when I instal...

WVHogRider

It was cleaned Sunday, as well as some replaced driver side door pins/bushings... :wink: ...but the truck has only been started twice since (today to & from work), as the weather was too nice & the new GF wanted to go for a ride.... :lol: :wink: Must be past Reed's bedtime..... :lol: ....j/k.... :wi...

WVHogRider

.....This will be getting cleaned this weekend. Gonna call bullchit on this one. Some cold beer or bike riding weather will reach out and ruin the effort :wink: :lol: :lol: You'd be correct if I didn't have my daughter this weekend....she can't reach the passenger pegs yet. So it will get cleaned. ...

WVHogRider

I've been trying to figure out my Evap Leak for over a year now...

..This will be getting cleaned this weekend.

WVHogRider

Hey Border, check out HDForums.com...I go by WVHogRider there as well. You can check out a bunch of different scoots there to see what you like, learn free mods, swap/buy parts with other members, etc, etc...just like here but with WAY more people. So what kinda Harley did you get? I checking into g...

WVHogRider

BADs Crew wrote: I use to read a book to my son every night and will never forget the first time he read a book to me. They do grow up fast.

Yep, mine now reads to me every night that I have her....And she's starting the whole clock thing to...She's 6.

S-10CREWCAB.NET

Search found 409 matches

Re: Sold the Crew too.

Re: Sold the Crew too.

Re: Sold the Crew too.

Re: Sold the Crew too.

Re: Sold the Crew too.

Sold the Crew too.

Re: flush without the rad hooked up?

Re: changing brake rotors and pads

Re: i am so sorry for another tire fitment question

Re: New tire opinions

Re: New tire opinions

Uh Oh......DTC C0267

Re: DTC's P0141, P0442, & C0221....?

DTC's P0141, P0442, & C0221....?