S-10CREWCAB.NET

jpturner928

I only got "not at this time" when I asked if they had plans to release a 6" lift for the crews.

jpturner928

Superlift has added this to their site http://www.superlift.com/Catalog.asp?P=K790&V=123 and this article http://www.superlift.com/media/articles ... 07_s10.pdf.

jpturner928

Took it to Dave at Afterhours to have the half shaft replaced. When he lifted up the truck there was oil dripping pretty bad under it. Found the driver side motor mount MIA and the oil cooler lines crushed on the diff. The time and cost to repair this is not worth it. Had to add two quarts of oil t...

jpturner928

paintballrocker wrote:
jpturner928 wrote:THis is what the truck looked like the First time I owned it while I was in England.
looks like lords walk behind base haha. truck looks good!

Yeah that was on Hawthorn Lane.

jpturner928

Hey yall, its been forever since i updated this. I had to fight the struct UK inspection laws the past 3 months. They dont like custom vehicles over here too much. So since the last update i switched the pitman arm from an XJ to an YJ, theres about a 2" drop difference between the two. The XJ was h...

jpturner928

THis is what the truck looked like the First time I owned it while I was in England.

jpturner928

Just got the front windows matched to the back.

jpturner928

Not anymore I came back in 08. I was at lakenheath in 04 to 08 with mine. How you likeing it there? Im liking it, been here over 2yrs now. Not sure where you worked but Im a crew chief. and it looks like someone had a friend in sheet metal that made the tool box haha I am a Vehicle Operator or Tran...

jpturner928

Power toolbox lid.

jpturner928

Last owner built it. The switch works the lid.

jpturner928

Not anymore I came back in 08. I was at lakenheath in 04 to 08 with mine. How you likeing it there?

jpturner928

Bet you wont find to many like this.

jpturner928

Switch additions when I took the truck over to England.

jpturner928

Yeah is what I was thinking.

jpturner928

Back again!! Sold my Crew in 08 in Ga while inroute from England to Wy. I wished I would have kept it then. So when I moved back to Ga and seen my old crew on the dealer lot with only 56K miles on and bought it back.

jpturner928

http://www.supercrewsound.com/shop/detail/11/77.htm. I found this one designed for the S10 CC

jpturner928

The Bird in hand is a hotel in the town of Mildenhall the roads of the big citys like cambridge and London are maintained the best the roads around lakenheath are not maintained that well or around the other smaller towns.

jpturner928

I will put it on a lift this weekend and move the tires around and try that first. I ship the truck back to the states in 1.5 months so I am going to wait to do the alignment for two reasons the roads are so bad most people never get alignments over here and I really am trying not to pay double for ...

jpturner928

Heres one for you guys. After putting the 30s on the truck I have noticed a pretty good pull to the left that wasn't there before. I know getting a front end alignment is a good idea when putting on new tires but wanted to wait till I get back to the states. That kind of work has to be done off base...

jpturner928

Thanks and thanks for posting th pic..

jpturner928

Here are some pics of the Crew with the Cooper STT's 30/9.5 R15 http://www.s-10crewcab.com/coppermine/albums/userpics/10138 Spent the morning working on getting the rubs taken care of. I changed the two lower bolts holding the inner finder to heavy duty rivets and trimmed the front valence and bent ...

jpturner928

I got the 30`s Cooper STTs tires mounted on the new rims today and put on the crew. I need to trim some of the front valence off and deal with the slight rub on the fenders near the doors I think it is catching the lower Bolt. I bent the bottom corner back and out of the way, might need to bend it b...

jpturner928

That will work for me I wouldnt mind. I will Have to wait on ordering this for right now I have a baby coming in Dec and we are moving from England to FE Warren, Wy in Feb.

jpturner928

This would be great to add to the truck. I have been looking at them for awhile wishing they would build for the S10 CCs

jpturner928

Here are the rims I am going to put on after I get them cleaned up and choose my tires

jpturner928

Well I guess I will just have to try it and see what happens or stick the 235s that are on truck now and see what happens with the rims I got.

jpturner928

I am wanting to run Discoverer STT - 30X9.50R15LT - OWL -Approved Rim Width 6.5 - 8.5 - Overall Diameter 29.7 on 15x7 - 6mm Ultra wheels. I got the wheels used from another crew-cab owner here in England they were running 235s on them. I know they will stick out from the fenders a little . My questi...

jpturner928

Thats what I did they fixed it right up..

jpturner928

My 04 cc did the same thing. I took it back to the place I bought it. They checked the codes nothing was found. They drove it and of course nothing happen. They asked if I have filled it up since I left the dealership. which was yes. Then the next question was it from the same place each time. Which...

jpturner928

RickZRX wrote:
jpturner928 wrote:Well here in England there are two othere crews besides mine driving around on base.
I haave the decal on my toolbox:
Lakenheath
Is
Bombing
Your
Ass

Cool

jpturner928

Well here in England there are two othere crews besides mine driving around on base.

jpturner928

I was reading about that system on Stylinconcepts.com. I wonder how it sounds. I might have to give it a go

jpturner928

The more I look at the more I think I like it better with out it

jpturner928

It is nice. It even has the new smell to it. I bought it with 24 miles after the test drive in Jan 04.

jpturner928

It has a nice tone... I am hoping to do it myself if I can find a nice cat back system I like. really wanted dual but I might wait till I get the truck back to the states. Pay`n in pounds sucks it is around 1.90 exchange rate here in england

jpturner928

has anyone found a good catback dual setup for our trucks?

jpturner928

Now would it be better to replace the thermostat with a aftermarket 180 and just do it myself?

jpturner928

thanks , it is still covered it is a 2004 and I just broke over 15,000 miles on it

jpturner928

I have noticed a water puddle under the crew this morning. after searching under the truck i lifted the hood to find what looks like a leak from the thermostat housing. has anyone else had this problem? and should this be covered by the warrenty?

jpturner928

Has any one tried this combo yet? or might have a knowledge if they will work on a stock cc? Any help would be great ..16X8 5-120.65 25MM with a tire size 245/75/16

jpturner928

Here is the rim I am looking at getting for the crew.

http://www.discounttiredirect.com/direc ... vid=007746

jpturner928

Yeah I am way east try England, any out there can beat that

jpturner928

Hey guys How are things? Just made it back to England from Iraq and I have the bug to up grade my tires like I was asking before. I was checking out a some rims on DiscountTireDirect.com and was wondering if any of you have bought from them. They say that the following tire/wheel combo will work on ...

jpturner928

thanks I have been reading this site for awhile just never joined.

jpturner928

The wheels I am looking at are centerline warrior wheels cll-075705547

jpturner928

except for me still having stock rim and tires that is the same color of my 2004 truck. Yours looks great

jpturner928

thanks

jpturner928

sorry guys it is early here in Iraq. the rims I am looking at are 15x7 with 5in back spacing same tires as before

jpturner928

i was wondering if 30x9.5 tires would rub on a 15/8 rim with 5-Bs I know the tires will stick out but hopefully not to much

S-10CREWCAB.NET

Search found 49 matches

Re: 6" RC lift

6" F.I.T. Performance Series Lift System

Re: What did you do to your Crew today?

Re: What did you do to your Crew today?

Re: Look what i did this weekend!

Re: What did you do to your Crew today?

Re: What did you do to your Crew today?

Re: What did you do to your Crew today?

Re: What did you do to your Crew today?

Re: What did you do to your Crew today?

Re: What did you do to your Crew today?

Re: What did you do to your Crew today?

Re: What did you do to your Crew today?

Re: Welcome new users - READ THIS! (Yes you.)...please.

Re: Welcome new users - READ THIS! (Yes you.)...please.

Looking for some help

leak from top of motor